Samsung UE 37D6500 User Manual

							◀▶
English
4. The network connection screen appears, and network setting is done.
5.  Place the wireless router in a desired location.
 
NIf the wireless router settings change or you install a new wireless router you 
must perform the Plug & Access procedure again, beginning from Step 1.
  
						

							◀▶
English
Priority QOS
Samsung wireless Router is optimized HD AV streaming for Samsung DTV
This is our product’s distinctive function.
Samsung wireless Router can be connected with many devices, such as laptop, 
mobile phone, BD player etc.
In case of connecting Samsung TV to Samsung wireless Router while other 
devices are connected, Samsung wireless Router will give Samsung TV a priority 
connection than other devices.
This function ensures the best streaming contents and throughput speed.
 
●Make your TV faster by giving priority bandwidth to your TV (on/off optional).
 
●By giving priority to Samsung TVs, enjoy HD content without buffering.
 
●Connection speed may vary based on the network environment.
  
						

							◀▶
English
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently reg-
istered the MAC address (a unique identifying number) of your PC or modem, which it then 
authenticates each time you connect to the Internet as a way of preventing unauthorized 
access. As your TV has a different MAC address, your ISP can not authenticate its MAC ad-
dress, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices 
other than a PC (such as your TV) to the Internet.
If your Internet service provider requires an ID or password to connect to the Internet, your 
TV may not be able to connect to the Internet. If this is the case, you must enter your ID or 
password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact 
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your 
Internet service provider.
  
						

							◀▶
English
 
❑
Setting the Time
 
OMENU
m 
→  System 
→ Time
 → ENTER
E
 
■
Time 
 
●Clock: Setting the clock is for using various timer features of the TV.
 
OThe current time will appear every time you press the INFO button.
 
NIf you disconnect the power cord, you have to set the clock again.
  
						

							◀▶
English
 
–Clock Mode (Auto / Manual)
Auto: Set the current time automatically using the time from a digital 
channel.
 
NThe antenna must be connected in order to set the time automatically.
Manual: Set the current time manually.
 
NDepending on the broadcast station and signal, the auto time set up 
may not be correct. In this case, set the time manually.
  
						

							◀▶
English
 
–Clock Set: Set the Date and Time.
 
NAvailable only when Clock Mode is set to Manual.
 
NYou can set the Date and Time directly by pressing the number buttons 
on the remote control.
 
–Time Zone (Auto / Manual): Set the time zone to GMT.
 
NAvailable only when the Clock Mode is set to Auto.
GMT (GMT -3:00 ~ GMT +12:00): Selects your time zone.
 
NAvailable only when the Time Zone is set to Manual.
 
–DST (Daylight Saving Time) (Off / On): Switches the Daylight Saving Time 
function on or off.
 
NThis function is only available when the Time Zone is set to Manual.
  
						

							◀▶
English
Using the Sleep Timer
 
OMENU
m 
→  System 
→ Time
 → Sleep Timer 
→ ENTER
E
 
●Sleep Timer 
t: Automatically shuts off the TV after a preset period of 
time. (30, 60, 90, 120, 150 and 180 minutes).
 
NTo cancel Sleep Timer, select Off .
  
						

							◀▶
English
Setting the On / Off Timer
 
OMENU
m 
→  System 
→ Time
 → ENTER
E
 
●On Timer 1 / On Timer 2 / On Timer 3: 
Three different on timer settings can be 
made. You must set the clock first.
Setup: Select Off , Once, Everyday, 
Mon~Fri, Mon~Sat, Sat~Sun or Manual to 
set at you convenience. If you select Manual, 
you can set up the day you want to activate 
the timer.
 
NThe 
c mark indicates the day is selected.
On Timer 1
Setup    
Off
SunMon Tu rWed Thu FriSat
Time     12:00 am
Volume     20
Source     TV
Antenna     Cable
Channel     3
Close
 
						

							◀▶
English
Time: Set the hour and minute. 
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on 
automatically. (USB can be selected only when a USB device is connected to 
the TV)
Antenna (when the Source is set to TV): Select ATV or DTV.
Channel (when the Source is set to TV): Select the desired channel.
Music / Photo (when the Source is set to USB): Select a folder in the USB 
device containing music or photo files to be played when the TV is turned on 
automatically.
  
						

							◀▶
English
 
NNOTE
 
●If there is no music file on the USB device or the folder containing a 
music file is not selected, the Timer function does not operate correctly.
 
●When there is only one photo file in the USB, the Slide Show will not 
play.
 
●If a folder name is too long, the folder cannot be selected.