Samsung TFT LCD Television T4081F-L User Manual

English - 7
Setting Up Anynet+ The following settings help set the Anynet+ functions.
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1.  
Press the Anynet+ button. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.  
Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER button.
, Press the ▲ or ▼ button to select "On", then press the ENTER button.
   
The Anynet+ (HDMI-CEC) function is enabled.   
If you...

English - 80
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ MenuDescription
View TVSwitches from Anynet+ to TV broadcast mode.
RecordStarts a recording. (This menu works only for a device supporting recording.)
(Device_Name) MenuShows the menu of the connected device.  Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
(Device_Name) OperationShows the play control menu of the connected device....

English - 81
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker.
1.   Press the Anynet+ button. Press the ▲ or ▼ button to select "Receiver", then press the ENTER button.
2.   Press the ◄ or ► button to select to "On", then press the ENTER button. Now you can listen to sound through the receiver.
. Press the EXIT button to exit.
    When the receiver (home theater) is set to On, you can hear sound outp\
ut from the TV’s...

English - 82
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center.
ProblemPossible Solution
Poor pictureTry another channel.Adjust the antenna.Check all wire connections.
Poor sound quality.Try another channel.Adjust the antenna.
No picture or sound.Try another channel.Press the SOURCE button.Make sure the TV is plugged in.Check the antenna connections.
No sound or...

English - 8
ProblemPossible Solution
Horizontal bars appear to flicker,jitter or shimmer on the image.Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker,jitter or shimmer on the image.Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and powerindicator light blinks steadily.On your computer check: Power, Signal Cable.The TV is using its power management system.Move the computer's mouse or press any key on the keyboard.
Image is not...

English - 84
Installing the Stand
< 2 ><  >
	1.	Place the TV face down on a soft cloth or cushion on a table.
2.	Put the stand into the hole at the bottom of the TV.
3.	Insert screw into the hole indicated and tighten.
Disconnecting the Stand
< 2 ><  >< 4 >
	1.	Place the TV face down on a soft cloth or cushion on a table.
2.	Remove four screws from the back of the TV.
3.	Separate the stand from the TV.
4.	Cover the bottom hole with a cap.

BN68-01308A-00Eng_0723.indd   842007-07-23   ¿ÀÈÄ...

English - 85
TV Rear PanelAuto Wall-Mount
EX-LINK Cable (Not supplied)
Setup▲ MoreHDMI Black Level  : Low ►Film Mode : Off ►Wall-Mount Adjustment    ►PIP     ►Function Help  : On ►SW Upgrade    ►
TV
 Move   Enter Return
Once the auto wall mount is installed,  your TV’s position can be easily adjusted.
Auto Wall-Mount Adjustment (Sold separately)(LN-T4081F, LN-T4681F, LN-T5281F)
Entering the menu
1.   Press the ▲, ▼, ◄ or ► button on your remote control.  
The Wall Mount Adjustment screen is displayed....

English - 86
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.When attaching to other building materials, please contact your nearest \
dealer.If installed on a ceiling or slanted wall, it may fall and result in sev\
ere personal injury.
Product FamilyinchesVESA Spec. (A * B)Standard ScrewQuantity
LCD-TV
23~ 26200 * 100M4
4
32 ~ 40200 * 200M6
46 ~ 52600 * 400
M857 700 * 400 (No VESA)
57 ~ 70800 * 400
80 ~1400 * 800
PDP-TV
42 ~ 50600 * 400
M8
455 ~...

English - 87
1.	Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2).
2.	Connect the Kensington lock cable.
3.	Fix the Kensington lock to a desk or a heavy stationary object.
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device  has to be purchased separately. The appearance and locking method may differ from the illustration...

English - 88
Specifications
Model NameLN-T4081F LN-T4681F
Screen Size (Diagonal)40 inches46 inches
PC Resolution1920 x 1080 @ 60 Hz1920 x 1080 @ 60 Hz
Sound Output 10W X 2 10W X 2
Dimensions (WxDxH) Body
With stand
 43.3 X 4 X 23.9 inches(1100 x 102.8 x 607.3 mm)43.3 X 11.4 X 26.6 inches(1100 x 289.9 x 675.4 mm)
 48.3 X 4.4 X 27 inches(1228 x 111 x 686.8 mm)48.3 X 12.6 X 29.6 inches(1228 x 319.9 x 752.4 mm)
Weight With Stand  Without stand
 57.76 lbs (26.2 kg) 49.16 lbs (22.3 kg)
 76.94 lbs (34.9 kg)...