Samsung Television UNES7550 User Manual

Brightness Test complete. This means 
there is enough light in the room for 
Motion Controls to work properly. 
(Appropriate ambient brightness: 50 — 
500 Lux)
 
NAvoid positioning the TV Camera 
directly into sunlight or any other 
illuminating light source.
Camera Angle Test: This will help 
determine whether the TV Camera can 
see you in order to use Motion Control.  

Stand or sit in front of your TV so that 
you can see yourself in the rectangle 
on the screen. If the camera is facing 
too high, or too low you can adjust it 
using the camera angle dial located on 
the back of the camera. Now, with your 
TV remote in one hand, select Start. 
With your other hand, wave slowly left 
to right at the TV. Be sure your hand 
is flat and your palm is facing directly 
at the TV. Wave your entire hand and  

arm in a deliberate manner, and not 
simply a flicking of the wrist. This is 
the best way for the TV to recognize 
your hand. When the Camera Angle test 
is complete, a cursor will appear on the 
screen.
Motion Control is now enabled and 
configured on your Samsung Smart TV.
To disable Motion Control, open the Motion 
Control Menu, select Motion Control and  

choose Off.
To use the Motion Control function, follow 
these steps:
1. 
With  Motion Control configured and 
activated, stand or sit in front of 
your TV. Make sure your hand is flat 
and palm is directly toward the TV 
wave three or four times side to side 
in a deliberate manner. When the TV 
recognizes you, the arrow cursor will  

appear on the screen. You are now 
able to control the TV with motion.
 
NIf you drop your hand out of range 
of the TV camera  Motion Control 
will close. Simply raise your hand 
within 3 seconds to reactivate 
Motion Control.
2.  
Control the TV using your hands.
 
NWhile using the Motion Control, if 
you use other devices (i.e. remote 
control, keyboard, etc.), Motion  

Control closes.
 
 
●   Pointing Navigation
 Moves the cursor to the position you 
want.
 
–  Action : Spread your hand and guide 
the cursor to position you want.
 
●   Run / 
Select
 Selects an item or executes a command 
that is indicated by the cursor or is 
highlighted. 

 
–  Action : Clench your fist.
 
●   Return
 Return to the previous menu.
 
–  Action : Spread your hand and rotate 
counterclockwise.
 
● Channel / Volume Control
 Changes the channel or adjust the 
volume.
 
N To increase or decrease the volume, 
move the cursor to hover over the 
w or v Volume button. The cursor  

will turn blue and a small circle 
will appear indicating you can now 
control this function. Simply close 
your hand to make a fist and open 
it again. The volume will increase or 
decrease one number every time you 
do this. Or hold the volume control 
by keeping your fist clenched. These 
same actions can control the channel 
up and down feature.
 
●  Scroll 

Scroll the page in the direction you 
want.
 
NSome applications may not support 
this function.
On the web page of your choice, 
simply move the cursor to the top or 
bottom or far left or right of the screen, 
the page will automatically scroll on 
the direction of your move.
Those are just some of the ways you can  

use Motion Control with Smart Interaction 
on your 2012 Samsung Smart TV.Face recognition
™  
→  Tools 
→ Settings 
→ Account Manager 
→  Change account information 
→ Face 
recognition
Enable or disable the Face recognition 
function. Face recognition lets you 
register your face with your Samsung 
account so that you can log into your