Samsung Television UNES7550 User Manual

2. 
Say a word or phrase listed in the 
Voice Command Bar.
 
NPronounce the word or phrase 
clearly and correctly in the 
language you selected in 
Language.
3.  
Wait until recognition is complete, 
and then say the next command in 
the same fashion.
 
NTo exit the Voice Control 
mode, speak the Trigger  

Words or "Cancel" using the 
TV's microphone, or press the 
RETURNR button.
 
NPlease note that in some cases, if 
your Voice Control function is set to 
On, your TV may be inadvertently 
turned on by ambient noise in your 
surrounding area. If this is a concern 
for you, you should turn Off the 
Voice Control functionality. 

Using the Voice Text Input Mode1. 
Say "Search All" while in the Voice 
Control mode.
2.  
Say the word or phrase you wish to 
search for.
3.  
The TV executes the spoken function.
 
NVoice Text Input Mode performance 
may vary depending on the language 
spoken, your pronunciation, the 
volume of your voice and your 
surrounding environment, including  

ambient noise levels.
Motion Control
Menu  → System
 
→  Voice and Motion 
Control  → Motion Control
Motion Control works with the Smart 
TVs built-in camera and allows you to 
use motion to open apps in Smart Hub, 
navigate web pages, and control certain 
TV functions.
 
NMotion Control function can be  

affected by your posture, your hand 
position, or ambient brightness 
conditions.
 
NSome applications may not support 
Motion Control.
 
NYou may experience physical fatigue 
when you use the Motion Control for 
extended periods.
 
NWhen you use Motion Control, please 
avoid direct sunlight.
 
NWe recommend using  Motion  

Control function within about 5 – 13 
ft with your TV. The TV Camera's 
recognition range may differ 
depending on the angle of camera or 
other conditions.
Because Motion Control works with the 
built-in camera on top of the Smart TV, 
it is important that you are within the 
sightline of the TV Camera and nothing 
is obstructing its view of you. If the 
TV Camera is facing too high, or too 
low, you can adjust it using the dial  

on the back of the TV. Motion Control 
works best in a well lit room. For best 
results, be sure the light in the room 
is illuminating the front of you. The 
TV Camera is looking for movement, 
so there should be contrast between 
you and the background. Before using 
Motion Control recommended to run 
a  Motion Control Environment Test (as 
described below) which measures the 
ambient light in the room, and ensures  

the built-in TV Camera is able to see 
you. (System  → Voice and Motion 
Control →  Motion Control →  Motion 
Control Environment Test ).
 
●Motion Control
Turns the Motion Control function on 
or off.
 
●Motion Guide Bar Size
Set the Motion Guide Bar Size  mode to 
Minimum  or Full. 

 
●Motion Control Environment Test
Brightness Test: In order for Motion 
Controls to work there must be 
sufficient light in the room. The 
Brightness Test measures the ambient 
light in the room. Stand or sit no more 
than 13 feet away from your TV and 
select the start option. The Brightness 
Test  will begin and should take about 
10 seconds. If there is not sufficient 
light in the room you will get a prompt  

that reads Brightness Test failed. This 
means that it is too dark for Motion 
Control to see your movements. It 
is suggested that you increase the 
brightness in your room. Also, check 
the angle of the camera to be sure it is 
facing out at you. Rotate the camera 
angle dial located on the back of the 
camera. After checking these things, 
select retest. If there is enough light 
in the room the prompt will read