Samsung Television UN75ES9000F User Manual

 Press  the ‹ button in the bottom 
center of the Touch Pad. You can select 
a desired function (e.g. 
Menu(
m),  
Source( s),  Info(
`), etc.) easily.
 
 
 
● Using  the  Mute function
 
–  If you press and hold the Touch Pad, 
it has same effect as pressing the 
MUTE
M button on your remote.
 
–  However, if you press and hold the  

touch pad when using Web Browser, 
the Touch Pad switches to the Scroll 
mode. When you press the Touch 
Pad again, the Scroll mode switches 
general mode.
 
– Press the Touch Pad or RETURN
R 
button to return to the general mode.
To Enter a channel number through 
Smart Touch Control 1.  
While watching a broadcast, press  

the NUMBERš button on the Smart 
Touch Control. The TV displays the 
number button screen.
2.  
Using the touch pad, highlight a 
number, and then press the touch 
pad. The TV displays a list of 
channels that start with the number 
you selected.
3.  
Using the touch pad, highlight the 
channel in the list you want, and 
then press the touch pad. 

 
NYou can also change the channel by 
touching the up or down channel 
icon on the touch pad. If you touch 
the touch pad immediately after, the 
TV displays the list of memorized 
channels. Select a channel by moving 
or flicking your finger up or down, 
and then pressing the touch pad.
 
NIf you change a channel by entering 
the channel number, that channel 
number is memorized and added  

to the Added Ch. list automatically. 
You can change the channels using 
a memorized channel list easily and 
quickly.
Using the Smart Touch Control with IR 
Blaster
When you connect an IR Blaster with your 
TV, you can control connected external 
devices with your TV using the Smart 
Touch Control.
IR Blaster Pairing 1.  
When you turn the IR Blaster on, the 
LED blinks. 

2. 
Briefly point the IR Blaster toward 
the IR sensor of the TV and press the 
PAIRING  button at the bottom.
3.  
The connection icons appear on the 
bottom left of the screen, and the TV 
connects to IR Blaster automatically.
 
NIf the connection process failed, 
please turn off and on the IR Blaster, 
try again from step 2.
 
NTo set a Universal Remote Control 
after pairing an IR Blaster, select Ye s . 

Precautions for Using an IR Blaster
 
NTo use an IR Blaster, the IR Blaster 
must be located nearby with external 
devices connected to the TV.
 
NNote that it should be no obstacle 
between the external device's IR 
receiver and an IR Blaster.
 
NInstall the IR Blaster within 50 cm 
and 45 degrees of the up, down, left 
and right directions of the IR sensor 
of the external device. 

 
NIf you control an external device by 
using the Smart Touch Control, the 
IR Blaster sends an IR signal into a 
corresponding external device.
Setting up Universal Remote Control Lets you control a Set-Top Box (STB) 
or a BD player or both connected to the 
TV using your Smart Touch Control. 
After you connect the device to the TV, 
the Smart Touch Control can control 
the navigation, number, and other keys  

needed to operate and control the 
device.
 
NThe Universal Remote Control can 
adjust TV's volume, but STB's 
volume cannot be adjusted. Watch 
STB after adjusting STB's volume to 
appropriate level.
 
NDepending on the version of an 
application, the Universal Remote 
Setup instructions may differ. In this 
case, please follow the instructions  

on the screen.
To connect the external device to your 
Smart Touch Control, follow these 
steps: 1.  
Select  Add a device to control, and 
then press the touch pad.
2.  
Select an external device from the 
connected devices, and then press 
the touch pad.
3.  
Select the port used to connect the 
external device, and then press the