Samsung Television UN60D7050VF User Manual

▶
English
▶
 
■
Reset Sound (Yes / No)
Reset all sound settings to the factory defaults. Select Reset Sound, press 
ENTER E, select Ye s
 in the pop-up, and then press ENTER
E again.  

▶
English
▶
 
❑
Wired Network Setting
 
■
Connecting to a Wired Network
There are three ways to attach your TV to your LAN using cable:
 
●You can attach your TV to your LAN by connecting the LAN port on the back\
 of 
your TV to an external modem using a LAN cable. See the diagram below.
The Modem Port on the Wall
LAN
LAN Cable
Modem Cable External Modem  
(ADSL / VDSL / Cable TV)  

▶
English
▶
 
●You can attach your TV to your LAN by connecting the LAN port on the back\
 
of your TV to an IP Sharer which is connected to an external modem. Use LAN 
cable for the connection. See the diagram below.
The Modem 
Port on the Wall LAN
LAN Cable LAN Cable
Modem Cable External Modem  
(ADSL / VDSL / Cable TV) IP Sharer  
(having DHCP server)  

▶
English
▶
 
●Depending on how your network is configured, you may be able to attach your 
TV to your LAN by connecting the LAN port on the back of your TV directly to 
a network wall outlet using a LAN cable. See the diagram below. Note that the 
wall outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
LAN
LAN Cable  

▶
English
▶
 
●If you have a Dynamic Network, you should use an ADSL modem or router 
that supports the Dynamic Host Configuration Protocol (DHCP). Modems and 
routers that support DHCP automatically provide the IP address, subnet mask, 
gateway, and DNS values your TV needs to access the Internet so you do not 
have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static 
IP address, you must enter the IP address,...

▶
English
▶
 
■
Network Settings
 
OMENU
m 
→  Network 
→ Network Settings 
→ ENTER
E
Set the network connection to use various Internet services such as Smart Hub, 
AllShare™ and perform software upgrades.
 
■
Network Status
 
OMENU
m 
→  Network 
→ Network Status 
→ ENTER
E
You can check the current network and Internet status.  

▶
English
▶
 
■
AllShare Settings
 
OMENU
m 
→  Network 
→ AllShare Settings 
→ ENTER
E
Selects whether to use media functions on the network. For details on se\
t up 
options, refer to the “AllShare™” instructions.
 
■
SWL (Samsung Wireless Link)
 
OMENU
m 
→  Network 
→ SWL (Samsung Wireless Link) 
→ ENTER
E
You can connect your TV to a wireless mobile device easily. For details on set up 
options, refer to the “Wireless Network Connection” instructions.  

▶
English
▶
 
■
Automatic Network Setup
Use the Automatic Network Settings when connecting your TV to a network 
that supports DHCP. To set up your TV’s cable network connection automatically, 
follow these steps:
How to set up automatically 1.  Go to the Network Settings screen.  
(MENU
m 
→  Network 
→ Network 
Settings  → ENTER
E)
2. Select  Wired, press ENTER
E, and then 
press ENTER E again.
3.  The network test screen appears and 
verifies the network connection. When the 
connection has been...

▶
English
▶
 
NIf the connection process fails, check the 
LAN port connection. 
 
NIf the automatic process cannot find the 
network connection values or if you want to 
set the connection manually, go to the next 
secton, Manual Network Setup.
Network Setting
Wired network and Internet connection completed.
Internet is connected successfully.
If you have a problem using any Internet services, contact your Internet service 
provider. MAC Address
00:12:fb:2b:56:4d
IP Address 192.168.11.4
Subnet Mask...

▶
English
▶
 
■
Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network that 
requires a Static IP address.
Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these 
steps:1.  Right click the Network icon on the bottom right of the screen.
2.  In the pop-up menu that appears, click Status.
3.  On the dialog that appears, click the Support tab.
4.  On the Support Tab, click the Details button. The Network connection...