Samsung Television UN60D7050VF User Manual

▶
English
▶
 
■
Picture Options
 
OMENU
m 
→  Picture 
→ Picture Options 
→ ENTER
E
Select an option using the up and down arrow keys, and the press ENTER E. 
Use the arrow keys to change the setting, and then press ENTER E.
 
NWhen connecting a PC, you can only make 
changes to Color Tone.
 
●Color Tone (Cool / Standard / Warm1 / Warm2) 
 
NWarm1 or Warm2 will be deactivated when the 
picture mode is Dynamic.
 
NYou can adjust and store settings for each 
external device connected to an input on the 
T...

▶
English
▶
 
●Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization): 
If the broadcast signal received by your TV is weak, you can activate the Digital 
Noise Filter feature to reduce any static and ghosting that may appear on the 
screen.
 
NWhen the signal is weak, try all the options until the the TV displays t\
he best 
picture.
Auto Visualization: When changing analog channels, displays signal strength.
 
NOnly available for analog channels.
 
NWhen the bar is green, you are...

▶
English
▶
 
●HDMI Black Level (Low / Normal): Lets you adjust the screen depth by 
selecting a black level.
 
NAvailable only in HDMI mode.
 
●Film Mode (Off / Auto1 / Auto2 / Cinema Smooth  for PDP TV ): Sets the TV 
so that it senses and then processes film signals from all sources automatically 
and adjusts the picture for optimum quality. The Cinema Smooth function is 
only active when the TV inputs an HDMI 24Hz signal.
 
NAvailable in TV, AV, COMPONENT (480i / 1080i) and HDMI (1080i).   

▶
English
▶
 
●Auto Motion Plus (Off / Clear / Standard / Smooth / Custom / 
Demo) 
 For LED TV : Removes blur and Translate from scenes with larger amounts 
of rapid  movement to provide a clearer picture.
 
NThe info screen on your TV displays the resolution and frequency of the 
incoming video signal (60 Hz). This displayed frequency is not the frequency 
of the picture the TV is displaying when you have Auto Motion Plus on.
 
NIf noise occurs on the screen, please set Auto Motion Plus to Off . If you...

▶
English
▶
Blur Reduction: Adjusts the blur reduction level for signals input from all video 
sources.
Judder Reduction: Adjusts the Translate reduction level for signals input from 
a video source through which you are playing a movie.
Reset: Reset the custom settings.
 
●Smart LED (Off / Low / Standard / High / Demo)  for LED 7900 and 8000 Series : 
Controls the LED backlight to maximize picture clarity.
Demo: Displays the difference between Smart LED on and off modes.
 
●Cinema Black (Off / On)  for...

▶
English
▶
 
■
Reset Picture (Yes / No)
Resets your current picture mode to its default settings.  

▶
English
▶
 
❑
Using the TV with Your PC
Set the input source to PC.
 
■
Auto Adjustment  t
 
OMENU
m 
→  Picture 
→ Auto Adjustment 
→ ENTER
E
Automatically adjusts the picture’s frequency, position, and fine tune settings in the 
PC mode.
 
NAvailable in PC mode only.
 
NNot available if you connect your PC with an HDMI to DVI cable.  

▶
English
▶
 
■
PC Screen Adjustment
 
OMENU
m 
→  Picture 
→ Screen Adjustment 
→ PC Screen Adjustment 
→ 
ENTER E
 
NAvailable in PC mode only.
 
●Coarse / Fine: Removes or reduces picture noise. If the noise is not removed 
by Fine-tuning alone, use the Coarse function to adjust the frequency as best 
as possible (Coarse) and Fine-tune again. After the noise has been reduced, 
re-adjust the picture so that it is aligned with the center of screen.
 
●Position: To adjust the PC’s screen position if it...

▶
English
▶
Using Your TV as a Computer (PC) Display
Entering the Video Settings (Based on Windows XP) 
For your TV to work properly as a computer display, you must enter the correct video 
settings.
 
NDepending on your version of Windows and your video card, the procedure on 
your PC will probably differ slightly from the procedure presented here. However, 
the same basic information will apply in most cases. (If not, contact y\
our computer 
manufacturer or Samsung Dealer.)  

▶
English
▶
1. Click “Control Panel” on the Windows start menu.
2.  Click “Appearance and Themes” in the “Control Panel” window. A display dialog-
box appear.
3.  Click “Display”. Another display dialog box appears.
4.  Click the the “Settings” tab on the display dialog-box.
 
●On the Settings tab, set the correct resolution (screen size). The optimal 
resolution for this TV is 1920 x 1080.
 
●If a vertical-frequency option exists on your display settings dialog box, select 
“60” or “60 Hz”. Otherwise,...