Samsung Television UN60D7050VF User Manual

▶
English
▶
Issues Solutions and Explanations
There is a dotted line on 
the edge of the screen.
 
•If the picture size is set to Screen Fit, change it to 16:9.
 
•Change the cable/satellite box resolution.
The picture is black and 
white.
 
•If you are using an AV composite input, connect the video cable (yellow) to 
the Green jack of Component Input 1 on the TV.
When changing channels, 
the picture freezes or is 
distorted or delayed.
 
•If the TV is connected to a cable box, try to reset the box....

▶
English
▶
Issues Solutions and Explanations
3D
The 3D Active Glasses are 
not working correctly
 
•Make sure the glasses are turned on.
 
•The 3D Active Glasses may not work properly if there is any other 3D 
product or electronic devices turned on near the glasses or TV.
 
•If there is a problem, keep other electronic devices as far away as possible 
from the 3D Active Glasses.
The 3D images don’t look 
quite right.
 
•The ideal viewing distance is three times or more the height of the screen.
 
•We...

▶
English
▶
Issues Solutions and Explanations
Sound Problem First, perform the Sound Test to determine if your TV audio is operating 
properly.
 
•Go to MENU - Support - Self Diagnosis - Sound Test) 
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or 
the sound is too low at 
maximum volume.
 
•Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc.\
)  
connected to your TV.
The picture is good but 
there is no sound.
 
•Set the Speaker Select...

▶
English
▶
Issues Solutions and Explanations
The speakers are making 
an inappropriate noise.
 
•Check cable connections. Make sure a video cable is not connected to an 
audio input. 
 
•For antenna or cable connections, check the signal information. A low si\
gnal 
level may cause sound distortion.
 
•Perform the Sound Test as explained on a previous page.
No Picture, No Video
The TV turns off 
automatically.
 
•Ensure the Sleep Timer is set to Off  in the System menu.
 
•If your PC is connected to the...

▶
English
▶
Issues Solutions and Explanations
RF (Cable/Antenna) Connection
The TV is not receiving all 
channels.
 
•Make sure the coaxial cable is connected securely.
 
•Run Auto Program to add available channels to the channel list. Go to 
MENU  - Channel  - Auto Program  then select Auto and make sure to select 
the correct Cable TV signal type. There are 3 options, STD, HRC and IRC. 
Most cable systems use STD. 
 
•Verify the antenna is positioned correctly.
No caption on digital 
channels.
 
•Check...

▶
English
▶
Issues Solutions and Explanations
PC Connection
A “Mode Not Supported” 
message appears.
 
•Set your PC’s output resolution so it matches a resolution supported by the 
T V.
“PC” is always shown on 
the source list, even if a PC 
is not connected.
 
•This is normal. “PC” is always shown in the source list, regardless of whether 
a PC is connected.
The video is OK but there 
is no audio.
 
•If you are using an HDMI connection, check the audio output setting on your 
PC.
Network Connection
The...

▶
English
▶
Issues Solutions and Explanations
Others
Purple/green rolling 
horizontal bars and buzzing 
noise from the TV speakers 
with a  Component cable 
connection.
 
•Remove the left and right audio connections from the set-top-box. If the 
buzzing stops, this indicates that the set-top-box has a grounding issue. 
Replace the Component video cables with an HDMI connection.
Plasma TV is 
making humming 
noise.   for PDP TV  
•Plasma TVs typically make a soft humming sound. This is normal. It’s caused...

▶
English
▶
Issues Solutions and Explanations
The picture won’t display 
in full screen.
 
•HD channels will have black bars on either side of the screen when 
displaying up scaled SD (4:3) contents.
 
•Black bars will appear on the top and bottom of the screen when you watch 
movies that have aspect ratios different from your TV.
 
•Adjust the picture size options on your external device or the TV to full 
screen.
Image Retention (Burn In) 
Issue.   for PDP TV  
•To minimize the possibility of screen...

▶
English
▶
Issues Solutions and Explanations
There is a plastic smell 
from the TV.
 
•This smell is normal and will dissipate over time.
The TV  Signal Information  
is unavailable in the Self 
Diagnosis menu.
 
•This function is only available for digital channels the TV receives from an 
Antenna / RF/Coax connection.
The TV is tilted to the side.
 
•Remove the base stand from the TV and reassemble it.
The channel menu is 
greyed out (unavailable).
 
•The Channel menu is only available when you select...

▶
English
▶
Issues Solutions and Explanations
You have intermittent loss 
of audio or video.
 
•Check the cable connections and reconnect them.
 
•Loss of audio or video can be caused by using overly rigid or thick cabl\
es. 
Make sure the cables are flexible enough for long term use. If mounting the 
TV to a wall, we recommend using cables with 90 degree connectors.
You see small particles 
when you look closely at 
the edge of the frame of 
the TV.
 
•This is part of the product’s design and is not a...