Samsung Television UN60D7050VF User Manual

▶
English
▶
 
■
Auto Turn Off (No / Yes) 
Set an Anynet+ Device to turn off automatically when the TV is turned off.
 
NIf Auto Turn Off is set to Ye s , running external devices will turn off at the same 
time as the TV powers off. 
 
NMay not be enabled depending on the device.  

▶
English
▶
 
❑
Switching between Anynet+ Devices
1. Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press 
ENTER
E.
2. Select  Device List, and then press the ENTER
E button.
 
NIf you cannot find a device you want, select Refresh to refresh the list.
3.  Select a device, and then press the ENTER
E button. You can switch to the 
selected device.  

▶
English
▶
 
NThe Device List menu appears only when you set Anynet+ (HDMI-CEC) to 
On in the System menu.
 
●Switching to the selected device may take up to 2 minutes. You cannot 
cancel the switching operation while switching is in progress.
 
●If you have selected an Anynet+ device by pressing the SOURCE button 
and then selecting its input source, you cannot use the Anynet+ function. 
Make sure to switch to an Anynet+ device by using the Device List.  

▶
English
▶
 
❑
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV 
Speaker.
1. Select  Receiver and set to On.
2.  Press the EXIT button to exit.
 
NIf your receiver supports audio only, it may not appear in the device list.
 
NThe receiver will work when you have properly connected the optical in jack 
of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
 
NWhen the receiver (i.e Home Theater) is set to On, you can hear sound...

▶
English
▶
Using the ARC functionYou can listen to sound through a receiver connected using an HDMI cable without 
connecting a separate optical cable.1.  Select  Receiver and set to On.
2.  Press the EXIT button to exit.
 
NTo use the ARC function, a receiver which supports the HDMI-CEC and ARC 
features must be connected to the HDMI IN 2 (ARC) port.
 
NTo disable the ARC function, set the Receiver to Off . Even if the TV transmits 
the ARC signal continuously, the receiver will be blocked from...

▶
English
▶
 
❑
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work.
 
•Check if the device is an Anynet+ device. The Anynet+ system 
supports Anynet+ devices only.
 
•You can connect only one receiver (home theater).
 
•Check if the Anynet+ device power cord is properly connected.
 
•Check the Anynet+ device’s Video/Audio/HDMI cable connections.
 
•Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ 
setup menu.
 
•Check whether the TV remote control is in TV mode....

▶
English
▶
I want to start Anynet+. 
•Check if the Anynet+ device is properly connected to the TV and 
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ 
Setup menu.
 
•Press the TOOLS button to display the Anynet+ menu and select a 
menu you want.
I want to exit Anynet+.
 
•Select View TV in the Anynet+ menu.
 
•Press the SOURCE button on the TV remote control and select a 
non- Anynet+ device.
The message “Connecting to 
Anynet+ device...” appears on 
the screen.
 
•You cannot use the remote...

▶
English
▶
The connected device is not 
displayed. 
•Check whether or not the device supports Anynet+ functions.
 
•Check whether or not the HDMI cable is properly connected.
 
•Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ 
setup menu.
 
•Search Anynet+ devices again.
 
•Anynet+ requires an HDMI connection. Make sure the device is 
connected to your TV with an HDMI cable.
 
•Some HDMI cables may not support Anynet+ functions.
 
•If the connection is terminated because there has been a...

▶
English
▶
 
❑
Troubleshooting
If your TV seems to have a problem, first review this list of issues and solutions. If none 
of these troubleshooting tips apply, please visit “www. samsung.com,” and then click 
on Support, or contact the Samsung call center.
Issues  Solutions and Explanations
Picture Quality First, perform the Picture Test and to see if your TV is properly displaying the 
test image.
 
•Go to MENU - Support - Self Diagnosis - Picture Test 
If the test image is properly displayed, the...

▶
English
▶
Issues Solutions and Explanations
The picture is distorted: 
macro block error, small 
block, dots, pixelization
 
•The compression of video contents may cause picture distortion especially 
in fast moving pictures such as sports and action movies.
 
•A weak or bad quality signal can cause picture distortion. This is not a TV 
issue.
 
•Mobile phones used close to the TV (within 3.3 ft) may cause noise in \
the 
picture on analog and digital channels.
Color is wrong or missing.
 
•If you’re...