Samsung Television S9CATSCF Specifications

							54
Motion Control Environment Test
Screen Menu > Smart Features > Motion Control >  Motion Control Environment Test
Run this test before using Motion Control to ensure proper functionality.
11 Run  Motion Control Environment Test and select Start within 4.9ft and 13.1ft of the TV. If light 
reflects on the TV screen, user can be difficult to use Motion Control.
21 Adjust the camera angle so that you appear inside the square displayed on the screen. Once 
you have finished adjusting the camera angle, wave one hand slowly from left to right. Spread 
your hand out with the palm facing the TV. An arrow cursor appears on the screen when the TV 
recognizes the action. If recognition fails, try again.
Motion Control Tutorial
Screen Menu >  Smart Features > Motion Control >  Motion Control Tutorial
Run Motion Control and follow the instructions. This lets you familiarize yourself with the basics of 
using Motion Control.
Motion Control Activation
Screen Menu >  Smart Features > Motion Control >  Motion Control Try Now
Raise your hand with the palm facing the TV. Hold it for a moment and slowly wave your hand from 
side to side three or four times. When your hand is successfully recognized, the Motion Control is 
activated and a pointer is displayed on the screen.
 
"
Dropping your hand out of the range of the TV camera deactivates Motion Control. Raise your hand within 3 
seconds to reactivate it. 
						

							5455
Using the Basic Motion Controls
Available motion commands may vary, depending on what the TV is currently doing.
The following basic motion control commands are available:
 
●Pointing Navigation : This action moves the cursor to the desired position.
 
●Run  / Select: Make a fist to select an option or execute a command. Keeping your fist clenched is 
like holding down a remote panel button.
 
●Return: Make a circle with your hand in the counterclockwise direction to return to the previous 
menu.
 
●Turning over screens : Hold one palm vertical, and swing to the left or right to change the Smart 
Hub screens.
 
●Zoom in /  Zoom out: Clench two fists, and make the gap between them wider or narrower. Use 
these actions with webpages, maps, or photos.
 
●Rotate : Clench two fists, and rotate them clockwise or anticlockwise as if turning a steering 
wheel. Use these actions with photos.
 
●Like : Without activating the Motion Control, raise and hold your thumb for 2 seconds. This 
automatically adds Facebook's "Like" option. However, This motion is available only on the 
Facebook.
 
●Pan : While zoomed into the photo, make a fist and then move it left/right/up/down to pan.
 
●Scrolling a web page : While viewing a web page, make a fist and then move it up/down to scroll 
the page up/down.
Motion Control Options
Screen Menu >  Smart Features > Motion Control
 
●Animated Motion Guide : Displays an animated guide when user motion is detected.
 
●Pointer Speed : Set the speed of the pointer used in  Motion Control. 
						

							56
Motion Control Screen
The Screen Composition while Viewing TV
Launching Motion Control while watching TV displays the following icons on the screen:
Screen IconsExplanation
 / Adjust the volume.
Turns the TV sound on/off.
 / Changes the channel.
Check the recommended program information and air times. Select a program 
from the list to view detailed information about that program. For more 
information, refer to "Scheduled Recommended Program Info".
Launch Smart Hub.
Enter a channel number using the number panel to jump to the channel. Use the 
playback remote panel with the on-screen color buttons to remote a media file 
that is currently playing.
Change the source.
Turn off the TV. 
						

							5657
The Smart Hub Screen Composition
Launching Motion Control while using Smart Hub displays the following icons on the screen:
Screen IconsExplanation
 / Adjust the volume. This function is only available on the On TV .
Turns the TV sound on/off. This function is only available on the On TV .
 / Changes the channel. This function is only available on the On TV.
Returns to the previous menu.
Check the recommended program information and air times. Select a program 
from the list to view detailed information about that program. For more 
information, refer to "Scheduled Recommended Program Info".
Displays the virtual remote panel on screen. Refer to the " Virtual Remote Control" 
for more information.
Change the source.
Turn off the TV. 
						

							58
Retrieving Icons on the Screen
When using Motion Control with Smart Hub, the icons will disappear automatically after two seconds 
of inactivity. To retrieve the icons, move the pointer to one of the three edges shown below (marked in 
blue) and then hold it there for 1 second. The icons will reappear on the screen.
Screen IconsExplanation
①
 /  /  /  / 
② /  / 
③ /  
						

							5859
Face Recognition
Users can register their faces and log into their Smart Hub accounts through Face Recognition. One 
face may be registered per account. Depending on the ambient brightness level and the user's skin 
tone, the TV may have difficulty recognizing the user's face.
Operating Environment
Users should be located between 4.9ft and 13.1ft from the camera. The actual recognition range may 
vary depending on the camera angle and other factors.
The appropriate ambient brightness is between 50 to 500 lux. (100 Lux: bathroom, 400 Lux: living 
room)
Face Recognition can recognize up to 5 different users at a time.
The TV may have difficulty recognizing twins and people with similar faces as two different 
individuals.
Note the following when using Face Recognition:
 
●Do not cover your face with a hat, a pair of sunglasses, or your hair.
 
●The user's entire face must be visible to the camera. Avoid shadows over your face. Shadows 
prevent the camera from recognizing your face accurately.
 
●Keep your expression as neutral as possible. In addition, keep your mouth closed but at the same 
time as neutral as possible.
 
●User's facial expression when logging into your Samsung account must be the same as the facial 
expression during the registration process. 
						

							60
Face Registration
Users can register their faces to the Smart Hub accounts. Create a new account if you do not already 
have one. Refer to the "Creating a Samsung Account" section for details.
Face Registration from the Smart Hub account information screen
 
"Log into Smart Hub first.
11 Open the Smart Features  > Samsung Account >  Edit Profile menu, and select  Register Face.
21 Read the instruction, select  OK, and then enter the password for the Samsung account.
31 Select Take Picture, and the user’s face appears on the screen. Keep the face to be completely 
in the red dotted frame. The face is successfully registered when the frame turns green. If it fails, 
select Retry.
 
"
The user's entire face must be visible to the camera. Avoid shadows over your face. Shadows prevent 
the camera from recognizing your face accurately.
 
"Keep your expression as neutral as possible. In addition, keep your mouth closed but at the same time 
as neutral as possible.
 
"It is better to select the checkbox beside  I want to enter password as well for increased security  for 
higher security. With the checkbox selected, the user must enter the password when logging in using 
face recognition.
41 Select  Save to finish. 
						

							6061
Face Registration for the Smart Hub account using face recognition
11 From the Smart Hub login window, select Face recognition, and then select  Start. The TV 
automatically recognizes the user's face.
21 Select a face to register from the list, and then select  Register Face in the popup window.
31 Read the instruction from the popup window, select  OK, and then select the account from the list. 
However, a user account appears in the list if the TV has a record of the user's account and the 
user is logged in.
41 Enter the password for the Samsung account. To make face recognition more accurate, scan the 
user's face again.
51 Select  Take Picture. The user’s face appears on the screen. Keep the face completely within the 
red round. The face is successfully registered when the round turns green. Select  OK to proceed.
 
"
The user's entire face must be visible to the camera. Avoid shadows over your face. Shadows prevent the 
camera from recognizing your face accurately.
 
"Keep your expression as neutral as possible. In addition, keep your mouth closed but at the same time as 
neutral as possible.
 
"It is better to select the checkbox beside  I want to enter password as well for increased security  for 
higher security. With the checkbox selected, the user must enter the password when logging in using face 
recognition.
Face Recognition Login
Select  Face recognition , and then select  Start from the login window. The TV automatically recognizes 
a user's face. If recognition fails, try again. If the password entry option has been enabled under  Edit 
Profile, you need to enter your password as well in order to log into the Smart Hub.
 
"
The user's entire face must be visible to the camera. Avoid shadows over your face. Shadows prevent the 
camera from recognizing your face accurately.
 
"Keep your expression as neutral as possible. In addition, keep your mouth closed but at the same time as 
neutral as possible.
 
"Once recognition succeeds, the TV logs into the Smart Hub automatically. If the TV recognizes two or more 
registered faces, a list of corresponding accounts appears. Select the appropriate account. Recognition of an 
unregistered face prompts a warning. 
						

							62
Using Peripheral Devices
Device Manager
Keyboard Settings
Mouse Settings
Smart Touch Control Settings
Universal Remote Setup
 
"The displayed image may differ depending on the model.
This TV can be controlled with a keyboard and a mouse instead of a remote panel.
These peripheral devices make it easier and more convenient to use the TV.
Certain models do not support USB HID class keyboards and mice.
Keyboard Connection
Screen Menu >  System > Device Manager  > Keyboard Settings  Try Now
Connect a keyboard to the TV for easier text entry. To use a USB keyboard, plug the keyboard cable 
into the TV's USB port. With a Bluetooth keyboard, pair it using the TV's Bluetooth function.
 
●Select Keyboard: Designate which keyboard to use. Only one keyboard can be used at a time. Try 
Now
 
●
Add Bluetooth Keyboard: View a list of Bluetooth keyboards within range. Select the keyboard 
you wish to use.
 
●Keyboard Options : Configure the language, type and other basic keyboard settings. Try Now
Keyboard Use
Use the following keyboard keys to remote the TV.
 
●Arrows key (Moves the focus), Windows (
m), Menu (TOOLS
), Enter (Selects and activates), ESC 
(RETURN ), Numbers (Numbers)
 
●F1 (a), F2 (b), F3 ({), F4 (}), F5 (), F6 (SOURCE  button), F7 (CH LIST button), F8 (MUTE 
button), F9/F10 (Volume Remote), F11/F12 (Change  Channel)
 
●Page Up /  Down: Scroll a webpage up or down. 
						

							6263
Mouse Connection
Screen Menu > System > Device Manager  > Mouse Settings Try Now
Connect a mouse to the TV and right-click on the mouse to bring up the Go To screen. You can 
then use the screen menu, Smart Hub, and other TV functions using the mouse as you would on a 
computer.
To use a USB mouse, plug the mouse cord into the TV's USB port. To use a Bluetooth mouse, pair it 
using the TV's Bluetooth function.
 
●Select Mouse : Designate which mouse to use. Only one mouse may be used at a time. Try Now
 
●
Add Bluetooth Mouse: View a list of Bluetooth mice within range. Select the mouse you wish to 
use.
 
●Mouse Options : Configure button assignments, pointer speed and other basic mouse settings. Try 
Now
Mouse Use
 
●Left Button : Selects and activates.
 
●Right Button : Brings up the Go To screen, which includes options such as Power Off, Screen 
Menu, Smart Hub, and Tools.
 
●Mouse wheel : Scroll a webpage up or down.