Samsung Television S9CATSCF Specifications

							34
Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the battery as this may 
be caused by insufficient battery power. If the problem persists, press the PAIRING button on the 
Smart Touch Control to restore pairing with the TV. The PAIRING  button cannot be accessed without 
removing the Smart Touch Control's battery cover. Within a distance between 1ft to 13.1ft(30cm to 
4m), point the Smart Touch Control to the TV receiver and press the PAIRING  button. When pairing is 
complete, the pairing image displays at the bottom left of the TV screen.

Battery Low Alarm
If the battery becomes low while using the Smart Touch Control, the following alarm window blinks 
and appears at the bottom of the left screen. If the alarm window pops up, replace the batteries of the 
Smart Touch Control. Use alkaline batteries for longer usage.
 
						

							3435
Buttons and Descriptions

 
						

							36
ButtonsDescriptions
TV Turns the TV on/off.
SOURCE Changes the source.
STB Turn on and off the satellite or cable set-top box connected to the TV. For this, the 
Smart Touch Control must be configured as a universal remote control. Refer to 
"Universal Remote Setup" for more information.
VOL Adjusts the volume.
VOICE Run Voice Recognition. To speak a voice command, press and hold the VOICE
 
button and say a voice command. Refer to " Voice Recognition" for more 
information.
MUTE Turns the TV sound on/off.
CH Changes the channel.
MORE Displays the virtual remote panel on the screen. The virtual remote panel consists of 
a number panel, a playback remote panel, and a quick access panel. Use the touch 
pad to select numbers and buttons. Refer to "
Virtual Remote Control" for more 
information.
Touch pad Drag your finger on the touch pad as you would on the touch pad of a laptop to 
move the focus displayed on the screen. To select item, press the touch pad. Refer 
to "
Using the touch pad " for more information.
RETURN  / EXIT Returns to the previous menu.
SMART HUB Launch Smart Hub. While an application is running, pressing the SMART HUB
 button 
terminates the application. Refer to " Smart Hub" for more information.
GUIDE Check the digital channel broadcasting schedule. Refer to "
Guide" for more 
information.
(for U.S.A. and Canada) Turn on the backlight for the buttons. The backlight lasts 
for only a few seconds. Turns the remote control light on or off. When on, the 
buttons become illuminated for a moment when pressed. (Using the remote control 
with this button set to On will reduce the battery usage time.)
Turns the Samsung Multi View on and off.
When using the Samsung Multi View function, users can select a screen to control 
among the Screen 1 and  Screen 2.
Turns the 3D function on or off.
¥ (for the other countries) Enable Sports Mode for the optimal sports viewing 
experience. 
						

							3637
Special Functions
Press and hold the following Smart Touch Control buttons to access various special functions.
ButtonsDescriptions
Touch pad Press and hold the touch pad while watching TV to display 
CH List on the 
screen. In addition, you can press and hold the touch pad for 2 seconds or more 
while an application is running to access the application's hidden features. (Not 
available with all applications.)
RETURN Press and hold this button to quit the current process or app.
MORE Press and hold the touch pad to select a desired function (e.g. 
e-Manual, 
TOOLS , INFO, etc.) easily. 
						

							38
Using the touch pad
Use the touch pad to perform various commands. Navigate to Tutorial (System > Device Manager  
>  Smart Touch Control Settings  > Tutorial ) to view an on-screen guide to using the Smart Touch 
Control. 
Try Now
Dragging
Drag on the touch pad in the desired direction. Move the focus or the pointer in the direction the 
finger is dragging.

Pressing
Press the touch pad. This selects the focused item.
 
						

							3839
Flicking
Flick on the touch pad in the desired direction. This moves the focus or scrolls the screen based on 
the direction and speed of the flick.

Pressing and Holding
Press and hold the touch pad while watching TV to display CH List on the screen. In addition, you 
can press and hold the touch pad for 2 seconds or more while an application is running to access the 
application's hidden features. (Not available with all applications.)
 
						

							40
Pressing and Dragging
Press on the touch pad, drag and release. This moves the selected web item in a webpage or your 
current location on a map.

Scrolling Up/Down
Scroll up/down the line on either the left or right edge of the touch pad. This scrolls a webpage or a 
list up/down. This scrolling feature easily accommodates both right-handed and left-handed users.

Scrolling Left/Right
Move your finger horizontally on the projected line at the top of the touch pad. You can horizontally 
scroll a horizontal list or the Smart Hub panel.
 
						

							4041
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left or right edge of the touch pad to bring up the 
numerical input window on the screen. Use your finger to enter the number for the channel you want 
to watch. The recognized number is displayed on the screen and the TV switches to the corresponding 
channel. However, the number you have entered may not be recognized properly by the TV. Refer to 
the guide below to ensure that your numerical entries are recognized accurately.

Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not recognize your entries if 
you do not follow the sequences shown below.
Adjusting the Touch pad
Screen Menu > System > Device Manager  > Smart Touch Control Settings  > Touch Sensitivity  Try 
Now
Users can adjust the sensitivity of the Smart Touch Control’s touch pad. Set  Touch Sensitivity to 
adjust sensitivity and make it more convenient to use. 
						

							42
Show Status and Notification Banner
Press the MORE button on the Smart Touch Control and then select  STATUS on the virtual remote 
panel to display the status and notification banner at the top of the screen. Refer to the " Status and 
Notification " for more information.
Recommended
This functions is only available on U.S.A. and Canada.
Press the RECOMM. / SEARCH  and then select Recommended from the list displayed at the bottom of 
the screen. This shows the current/scheduled program and application recommendations.
Select a program that is currently airing to jump to the corresponding channel or a program that is 
scheduled to air to set up a Schedule Viewing setting. Refer to the " Scheduled Recommended Program 
Info" for more information.
Select an application to launch. Samsung Apps will launch if the selected application is not installed 
on the TV. Refer to the " Samsung Apps" for more information.
History
For U.S.A. and Canada
Press the RECOMM. / SEARCH  and then select History from the list displayed at the bottom of the 
screen. This displays an interactive list of recently accessed channels, media content and applications.
For the other countries
Press the HISTORY / SEARCH  and then select History from the list displayed at the bottom of the 
screen. This displays an interactive list of recently accessed channels, media content and applications.
Deleting History Data
Screen Menu >  Smart Features > Remove viewing history >  History
You can delete the history information about recently viewed channels, content and applications.
Searching
For U.S.A. and Canada
Press the RECOMM. / SEARCH  button on the Smart Touch Control. The list appears at the bottom of 
the screen. Press the RECOMM. / SEARCH  button again. The keypad will appear on the screen. Enter 
search criteria to search not only many apps and their contents on the TV but also the Web. For more 
information, refer to " Searching".
For the other countries
Press the HISTORY / SEARCH  button. The list appears at the bottom of the screen. Press the HISTORY 
/ SEARCH  button again. The keypad will appear on the screen. Enter search criteria to search not only 
many apps and their contents on the TV but also the Web. For more information, refer to " Searching". 
						

							4243
Virtual Remote Control
Press the MORE button to display the virtual remote panel on the screen. The virtual remote panel 
consists of a number panel, a playback remote panel, and a quick access panel. Use the touch pad to 
select numbers and buttons. Press and hold this button. A quick access panel of virtual remote panel 
appears. You can select screen buttons easily.
Changing the Virtual Remote Control Panel
Choose the number panel, playback control panel, or quick access panel as the panel to be shown on 
the screen.
Use the touch pad to keep moving the focus left or right. The panel changes when the focus is moved 
beyond the leftmost or rightmost edge.
Use left/right scroll function on the touch pad to change the panel easily.
Change a position of the Virtual Remote Panel
Press the MORE  button on the Smart Touch Control. The virtual remote panel appears on the screen. 
Press and hold the touch pad for one second. Users can change a position of the virtual remote panel 
of the screen.
Using the Number Panel
Use the number panel to enter numbers on a keypad screen or webpage or to change the channel 
while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily 
return to previous channels.
Using the Playback Control Panel
Use the playback control panel to pause, rewind, fast forward, skip to the next file, and much more 
while enjoying media content.
Using the Quick Access Panel
Quickly access the INFO , TOOLS and e-Manual buttons. However, the availability of buttons may vary 
depending on the operating mode of the Smart Touch Control (with the TV only, as a universal remote, 
etc.).
Adjusting the virtual remote panel
Screen Menu >  System > Device Manager  > Smart Touch Control Settings  > Onscreen Remote Size  
Try Now
You can resize the virtual remote panel. If the virtual remote panel buttons are too small, enlarge the 
remote panel window before using the virtual remote panel.