Samsung Television PNF8500 User Manual
Have a look at the manual Samsung Television PNF8500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
94 ●Color Space Adjusts the range of colors that can be expressed on screen. Auto automatically adjusts the color space depending on the input signal, and Native applies a range that is wider than the input signal. Custom allow the user to manually adjust a range of the desired color in the colors of the input signal. Try Now ● White Balance Adjusts the color temperature of the picture to make white objects look white and the overall picture appear natural. Adjust each color's luminosity with the offset menu and the brightness with the gain menu. To restore the default values, select Reset. Try Now ● 10p White Balance Adjusts the white balance by adjusting the brightness of the red, green, and blue elements in 10-point intervals. This option is only available when Picture Mode is set to Movie and may not be supported by some external devices. Try Now ● Gamma Adjusts the primary color intensity. Try Now ● Expert Pattern Displays picture calibration patterns on the screen without using a separate pattern generator or filter. Pattern1 is used to calibrate the contrast, and Pattern2 is used for calibrating the color and color saturation. If the screen menu disappears or a different menu is activated while the screen is being calibrated, this option will save the changes up to that point and automatically deactivate that menu. This feature is enabled in Component and HDMI modes only. Try Now ● Motion Lighting Adjusts the picture brightness depending on the on-screen movements for reduced power consumption. This feature is only available when Picture Mode is set to Standard and is not available in 3D mode. In addition, adjusting Contrast or Brightness automatically deactivates this feature. Try Now
9495 Picture Options Screen Menu > Picture > Picture Options Try Now Picture Options Color Tone Standard Digital Clean View Auto MPEG Noise Filter Auto HDMI Black Level Low Film Mode Off Auto Motion Plus Standard Cinema Black Off The displayed image may differ depending on the model. Use Picture Options to further improve the picture quality. When connected to a computer via an HDMI-to-DVI cable, users can only change Color Tone. ●Color Tone Adjusts the color tone. The setting is applied on an individual Picture Mode basis. When Picture Mode is changed, the corresponding setting will apply automatically. If Picture Mode is set to Dynamic, users can only choose between Cool and Standard. Try Now ● Digital Clean View Reduces static and ghosting caused by weak signals. This feature is only available for ATV channels. Selecting Auto Visualization displays the signal strength on the screen. Green indicates the best possible signal. Try Now ● MPEG Noise Filter Reduces MPEG noise and improves the video quality. Try Now
96 ●HDMI Black Level This is available only for video input via an HDMI cable. Use this to reduce image retention that may occur when watching video from an external device. Choose one of the black levels. Try Now ● Film Mode Optimizes the picture quality for movies. Select the mode for watching movies. This feature is only available when watching TV or when the input signal is AV, Component (480i, 1080i), or HDMI (1080i). Try Now ● Motion Judder Canceller Optimize screen for displaying fast pace scenes for movies. This feature is only available for PDP TVs. ●Black optimizer Adjust overall black color depth to give a change to picture depth. This is not available when playing a media file or using the TV as a computer display. This feature is only available for PDP TVs. ●Auto Motion Plus Use this to reduce blur and judder from scenes with rapid movement. If you select Custom, you can configure the afterimage and screen trembling removal ratio and you can view a sharper image through the LED Clear Motion function. This feature is only available for LED TVs. While Auto Motion Plus is running, select the virtual remote panel's INFO button to display the resolution and frequency of the incoming video signal (60Hz). The displayed frequency is not the same as the frequency of the picture the TV is displaying when Auto Motion Plus is activated. ● Smart LED This controls the brightness of individual areas on screen to maximum contrast automatically. This function is not supported depending on the region or model. ●Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience. This function is available for LED 7450/7500, 8000 series models only.
9697 Basic Sound Settings Screen Menu > Sound Sound Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Digital Audio Out Sound Customizer Reset Sound The displayed image may differ depending on the model. Use the Sound Settings to change the sound mode, enable/disable surround sound, adjust the equalizer, and optimize the TV's sound. Changing the Sound Mode Screen Menu > Sound > Sound Mode Try Now Sound modes make adjustments to the sound output. However, Sound Modes are not available when using external speakers only. ●Standard: This is the normal sound mode. ●Music : This mode emphasizes normal music instead of voices. ●Movie: This mode is calibrated to provide the best sound for movies. ●Clear Voice: This mode emphasizes voices. ●Amplify : This increases the overall intensity of high-frequency sounds for a better listening experience. It is designed for hearing-impaired listeners. ●Stadium : This is chosen automatically when Sports mode is turned on under the Smart Features menu. This functions is not available on U.S.A. and Canada.
98 Adjusting the Sound Settings Screen Menu > Sound > Sound Effect Try Now Use sound effects to alter how the TV projects sound. These options are available only when Speaker Select is set to TV Speaker and Sound Mode is set to Standard. ●Virtual Surround: Produces sound that will make you feel like you are sitting in a movie theater or concert hall. Try Now ● Dialog Clarity : Increases the voice intensity to make dialog clearer. Try Now ● Equalizer : Adjusts the speaker balance and makes bandwidth adjustments. Select Reset to reset the settings. Try Now Auto Volume Screen Menu > Sound > Speaker Settings > Auto Volume Try Now Because each station has its own set of broadcasting conditions, the volume may fluctuate as the channel changes. The Auto Volume function automatically adjusts the volume of a channel by lowering or raising the sound output. Normal applies a normal level of volume adjustment, whereas Night applies a slightly lower volume level than Normal and is ideal for nighttime TV viewing. To use the volume control of a connected source device, deactivate the Auto Volume function. When using the Auto Volume function with a source device, the device’s volume control may not function properly. TV Installation Type Screen Menu > Sound > Speaker Settings > TV Installation Type Try Now Select the TV's installation type. Choose between Wall Mount and Stand to optimize the TV's sound automatically. Resetting the Sound Screen Menu > Sound > Reset Sound Try Now This resets all sound settings to the factory defaults.
9899 Sound Customizer Screen Menu > Sound > Sound Customizer Try Now Sound Customizer Custom Sound Profile Off Add Custom Sound Edit Custom Sound Manage Custom Sound The displayed image may differ depending on the model. Sound Customizer lets you calibrate the TV for the optimal sound quality based on the user's hearing level and the ambient conditions. Creating a Custom Sound Screen Menu > Sound > Sound Customizer > Add Custom Sound Try Now Remain quiet and run Add Custom Sound. 11 Select Start to preview a test tone. Select Next to proceed. 21 A 6-step test will start. During each stage, select Stop when you can hear the test tone. If you want to listen to it again, select Retry. Once the test is complete, you can compare the original sound to the calibrated sound. 31 Select Next and enter a name for the calibrated sound profile. You can select a custom sound profile from Custom Sound Profile (Sound > Sound Customizer > Custom Sound Profile). Try Now Modifying Sound Profiles Screen Menu > Sound > Sound Customizer > Edit Custom Sound Try Now Choose one of the custom sound profiles to modify it. Follow the same steps as used in creating a sound profile. This function is only available when you add a custom sound mode in the Custom Sound Profile. Managing Custom Sounds Screen Menu > Sound > Sound Customizer > Manage Custom Sound Try Now Rename or delete custom sound profiles. This function is only available when you add a custom sound mode in the Custom Sound Profile.
100 3D Audio Screen Menu > Sound > 3D Audio Try Now Sound Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Digital Audio Out Sound Customizer Reset Sound The displayed image may differ depending on the model. 3D audio technology provides immersive sound that matches the pop-up effect of 3D video by using perspective in the audio depth control. 3D Audio is only available while viewing 3D content. Speaker Settings Sound Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Digital Audio Out Sound Customizer Reset Sound The displayed image may differ depending on the model. If the TV's audio is sent to an external device such as a home theater system, you can designate which speakers to use and make adjustments to eliminate decoding speed echoes.
100101 Speaker Select Screen Menu > Sound > Speaker Settings > Speaker Select Try Now You can choose which speakers to use from among available several speakers. Choose one from the list of speakers. To use both the TV speakers and the AV receiver speakers simultaneously, set this option to TV Speaker. If there is a delay between the two sounds, choose any other than TV Speaker to mute the TV speakers. Using the external speakers only disables the volume button and the mute function. In addition, certain Sound options will be disabled. Digital Audio Output Screen Menu > Sound > Digital Audio Out Try Now This TV is SPDIF-enabled. The Sony Philips Digital Interface (SPDIF) provides digital audio output to speakers and various digital devices, including A/V Receivers and home theaters. This feature reduces interference and distortion. ●Audio Format: Selects the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) formats may vary depending on the input source. Try Now ● Audio Delay : This setting helps correct timing mismatches between the audio and video tracks when watching TV and listening to audio through a digital audio device. Enabling the feature displays a slide bar that you can use to adjust the delay by up to 250ms. Try Now Samsung Audio Device Connection Screen Menu > Sound > Speaker Settings > SoundShare Settings Connect the TV to a Samsung audio device for a richer, clearer sound. This function is available for Samsung Audio Device supported the SoundShare function. Pair the Samsung audio device using the TV's Bluetooth function. Refer to the Samsung audio device's operating manual for more information on pairing. ●Add New Device Enables/disables SoundShare. Connection signals from new devices are ignored if they are set to Off. ●Samsung Audio Device List Displays a list of paired Samsung audio devices. Select a device to display its menu options. Activate/deactivate the audio device or remove it from the list. When using a Bluetooth audio device, a slight mismatch between the audio and video may occur, depending on the content.
102 Clock and Timer System Setup Menu Language English Time Device Manager Eco Solution Auto Protection Time 2 hours Change PIN The displayed image may differ depending on the model. Use the clock and timer to make scheduled use of the TV easier and more efficient. Once the clock has been set, you can select the virtual remote panel's INFO button to check the current time. The clock must be reset every time the power is disconnected. Setting the Time Screen Menu > System > Time > Clock Try Now Set the clock manually or automatically.
102103 Auto Automatically download the correct time from a digital channel. To enable this option, an antenna cable has to be connected to the TV. The accuracy of the time information received may vary depending on the channel and signal. Set Clock Mode to Auto. Time Zone and DST may not be supported depending on the country. ● DST: Set the DST (Daylight Savings Time). ●Time Zone: Choose your time zone. Time Offset Screen Menu > System > Time > Clock > Time Offset Try Now If the set time is not accurate, users can set the time offset to adjust the time difference hourly from -12 to +12 hour. Changing Time Offset is only available, when the Time is set to auto, and is set through a network. The current time will be set through a network, if the TV fails to receive the time information including the broadcast signal from TV stations. (ex: Watching TV via set-top box, Satellite receiver, or etc) Manual Manually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the current time and date. Sleep Timer Screen Menu > System > Time > Sleep Timer Try Now This function automatically shuts off the TV after a preconfigured period of time. You can set the timer up to 180 minutes in 30 minute increments.