Samsung Television PNF8500 User Manual

164
51 The warranty does not apply to any product that has been damaged or rendered defective as a 
result of any of the following excluded reasons, namely:
 
●as a result of accident, misuse, or abuse;
 
●through the failure to use this product for its normal purposes;
 
●by the use of parts not manufactured or sold by Samsung;
 
●by modification without the written permission of Samsung;
 
●by damage resulting from transit, neglect, power surge or failure;
 
●by damage resulting from lightning, water,...

164165
Licenses
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used 
under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This 
is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software 
tools to convert your files into DivX videos. 
ABOUT DIVX...

166
Troubleshooting
If the TV appears to have a problem, first review this list of possible problems and solutions. If none of 
the troubleshooting tips apply, visit www.samsung.com/support or contact Samsung Customer Service.
Screen
If there is a problem with the screen, run  Picture Test (Support > Self Diagnosis > Picture Test) to 
diagnose the issue. If the test fails to identify a problem, there may be a problem with an external 
device or the signal strength.
There is something  wrong with the TV....

166167
There is something 
wrong with the TV. Try this!
Problems Powering On When the TV is turned on, the remote panel receiver flashes 5 times before the 
screen turns on.
If you find that you are having problems powering on your Samsung television, 
there are a number of things to check before calling the service department. If the 
power cord is connected properly and the remote panel is operating normally, the 
problem might be with the antenna cable connection or the cable/satellite box not 
being...

168
Sound
If you find that there is a problem with the TV's speakers, run Sound Test (Support > Self Diagnosis > 
Sound Test) to diagnose the issue. If the audio is OK, the sound problem may be caused by the source 
or signal.
There is something wrong  with the TV. Try this!
There is no sound or 
the sound is too low at 
maximum volume. Please check the volume of the device (cable/satellite box, DVD, Blu-ray, etc.) 
connected to your TV.
The picture is good but 
there is no sound. Navigate to 
Sound...

168169
Antenna (Air/Cable) Connection
There is something wrong 
with the TV. Try this!
The TV is not receiving 
all channels. Make sure the coaxial cable is connected securely.
Run 
Auto Program ( Broadcasting > Auto Program) to add all available channels 
to the channel list.
Verify that the antenna is positioned correctly.
There are no captions on 
digital channels. Navigate to 
Caption (Broadcasting  > Caption ) and change the Caption Mode 
setting.
Some channels may not have caption data.
The picture...

170
Miscellaneous
There is something wrong with the TV. Try this!
The TV is hot. Watching TV for an extended period of time causes the panel to generate heat. 
The heat from the panel is dissipated through internal vents running along the 
top part of the TV. The bottom portion, however, may feel hot to the touch after 
extended use. Children watching TV need constant adult supervision to prevent 
them from touching the TV. This heat, however, is not a defect and does not 
affect the TV's...

170171
There is something wrong 
with the TV. Try this!
Broadcasting  is grayed 
out. The Broadcasting
 menu is only available when Source  is set to TV.
The Broadcasting  menu cannot be accessed while watching TV using a cable 
box or satellite receiver.
The settings are lost 
after 30 minutes or every 
time the TV is turned off. If 
Use Mode  is set to Store Demo, the TV's audio and video settings are 
automatically reset every 30 minutes.
Change Use Mode  (Support >  Use Mode) to Home Use.
There...

172
Anynet+ (HDMI-CEC)
There is something wrong with the TV. Try this!
Anynet+ does not 
work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ 
devices only.
Only one external device may be connected to 
Receiver.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Navigate to the System menu and verify that Anynet+ (HDMI-CEC)  is set to On.
Check whether the TV remote panel is in TV mode.
Check whether the...

172173
Apps
There is something 
wrong with the TV. Try this!
Some application 
content only appears 
in English. How can I 
change the language? The application content language may be different from the user interface 
language. The ability to change the language depends on the service provider.
Some application 
services do not work. Check with the service provider.
Refer to the help section on the application service provider's website.
Photos, Videos
 & Music
There is something 
wrong with the...