Samsung Syncmaster Xl2270hd User Manual

							Installing the Product2-8
2-8 Connecting Using a DVI to HDMI Cable 
1. Connect the DVI output terminal of an external device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable. 
2. Connect the red and white plugs of an RCA to stereo (for PC) cable to the same coloured audio output terminals of the digital 
output device, and connect the opposite plug to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product.
Press the [SOURCE] button at the front of the monitor or on the remote control to select  mode.
 
						

							2-9Installing the Product
2-9 Connecting a Component cable 
1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN (PR, PB, Y)] input 
ports using a component video cable [P
R, PB,Y].
2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN (R-AUDIO-L)] port of the 
monitor.
Press the [SOURCE] button at the front of the monitor or on the remote control to select the  mode.
 For an explanation of Component video, consult your DVD/VCR/Cable/Satellite box manual.
 
 
						

							Installing the Product2-10
2-10 Connecting a Scart cable
1.Connect the EXT(RGB) port of the monitor to the DVD Player using a SCART jack.
2.When a Scart device is connected to your monitor, the Source automatically changes to EXT.
 • Connect to the DVD Devices input if the device has a [EXT (RGB)] jack. 
• You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on.
 
 
						

							2-11Installing the Product
2-11 Connecting COMMON INTERFACE
1.Insert the CI CARD into the CAM in the direction of the arrow until it fits.
2.Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
3.Check if you can see a picture on a scrambled signal channel.
 • When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
• The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in 
about 2~3 minutes. If an error message is displayed, please contact your service provider.
• When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating 
that the channel list is now updated.
• You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with 
your hands since dropping the CI CARD may cause damage to it.
• Insert the CI-Card in the direction marked on it.
• CAM is not supported in some countries and regions, check with your authorized dealer.
 
 
						

							Installing the Product2-12
2-12 Connecting to an Amplifier
Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical 
cable.
 • If no sound is emitted from the monitor, you need to use an amplifier.
• For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their 
manufacturers.
 
 
						

							2-13Installing the Product
2-13 Connecting Headphones
 Connect your headphones to the Headphone connection terminal.
2-14 Kensington Lock 
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, refer to the User 
Manual supplied with the locking device for more information. 
 You must purchase the Kensington Lock separately. 
 
To lock the product, follow these steps:
1.Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.
2.Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3.Insert the locking device into the Kensington slot on the Monitor ( ).
4.Lock the lock( )
 •These are general instructions. For exact instructions, see the User Manual supplied with the locking device.
• You can purchase the locking device from an electronics store or an online shop.
 
 
						

							Using the Product3-1
3 Using the Product
3-1 Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.Press the [POWER ] button on the remote control.
 • You can also use the [ ] button on the TV.
• The message  is displayed.
 
2.Press the [ ] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [ ] button to confirm your 
choice.
3.Press the ◄ or ► button to select  or , then the [ ] button.I
 • We recommend setting the TV to  mode for the best picture in your home environment.
•  mode is only intended for use in retail environments. If the unit is accidentally set to  
mode and you want to return to  (Standard): Press the volume button on the TV. When the volume 
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
 
4.Press the [ ] button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [ ] button to confirm your 
choice.
5.Press the ▲ or ▼ button to select  or , then press the [ ] button.
 • :  antenna signal. / :  antenna signal. 
• In Cable mode, you can select the correct signal source among , , and  by 
pressing the ▲, ▼, ◄ or ► button, then press the [ ] button. If you have Digital cable, select the cable system 
signal source for both Analogue and Digital. Contact your local cable company to identify the type of cable system 
that exists in your particular area.
 
6.Press the ▲ or ▼ button to select the channel source to memorise. Press the [ ] button to select .
 • When setting the antenna source to , a step appears allowing you to set a value for the digital channel 
search. For more information, refer to  → .
• : Digital and Analogue channels.
• : Digital channels.
• : Analogue channels.
• The channel search will start and end automatically.
• Press the [ ] button at any time to interrupt the memorisation process.
• After all the available channels are stored, the message Set the  is displayed.
 
7.Press the [ ] button.
Press the ▲ or ▼ button to select , then Press the [ ] button. 
 • If you select ,  is displayed.
• If you have received a digital signal, the time will be set automatically. If not, select  to set the clock.
 
 
						

							3-1Using the Product
8.The description for the connection method providing the best HD screen quality is displayed. Check the description and press 
the [ ] button.
9.The message  is displayed. When you have finished, press the [ ] button.
If you want to reset this feature...
1.Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select , then press the [ ] button.
2.Press the [ ] button again to select .
 • The  feature is only available in the TV mode.
• The default PIN number of a new TV set is 0-0-0-0.
 
 
						

							Using the Product3-2
3-2 Viewing the Control panel
 Touch one of the operating buttons lightly.
The LED buttons appear.
 
ICONDESCRIPTION
[] Use this button to select a function. 
Signals other than the TV signal can only be selected if the corresponding device is 
connected. 
The order in which the TV/external input signal changes.
 →  →  →  →  → 
[MENU]Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu.
[ -/+ ] Moves from one menu item to another horizontally or adjusts selected menu values.
Adjusts the audio volume. 
[/]Use these buttons to navigate the menu or to adjust a value in the OSD.
Press to change the channel.
[]Press this button to turn the product on or off. 
Power LED
This LED is turned on when the product works normally. 
 For information about the power saving function, refer to the power saving 
function section of the product specifications. When not using the product for a 
long time, unplugging the power cord is recommended to minimize power 
consumption.
 
Speakers-
 
						

							3-3Using the Product
3-3 Remote Control
 The performance of the remote control may be affected by a TV or other electronic device operating near the product, 
causing a malfunction due to interference with the frequency.
 
 POWER
Turns the product On/Off.TV
Selects the TV mode directly.
Number Buttons
Press to change the channel.PRE-CH
This button is used to return to 
the immediately previous chan-
nel.
Activates a highlighted menu item.
 MUTE
Press to temporarily cut off the 
sound.
+  -
Press to increase or decrease the 
volume. P
Press to change channels.
CH LIST 
It displays Channel List on the 
screen. SOURCE
Press the button to change the 
input signal SOURCE.
Changing the SOURCE is only 
allowed for external devices that 
are connected to the monitor at 
the time.
 MENU
Opens the on-screen menu and 
exits from the menu or closes the 
adjustment menu.FAV.CH
Press to switch to your favourites 
channels.
TOOLS
Use to quickly select frequently 
used functions. RETURN
Returns to the previous menu.
 Up-Down Left-Right but-
tons  ENTER
Moves from one menu item to 
another horizontally, vertically or 
adjusts selected menu values. EXIT
Exits from the menu screen.
 INFO
Current picture information is dis-
played on the upper left corner of 
the screen.SUBT.
Digital subtitle display
Colour BUTTONS
Press to add or delete channels and 
to store channels to the Favourite 
channel list in the “Channel List” 
menu.GUIDE
Electronic programme Guide 
(EPG) display.
TTX / MIX
TV channels provide written infor-
mation services via teletext.
, , , , , , ,  , 
Teletext Feature