Samsung Syncmaster Xl20 Quick Start Guide

							zInternet web site :  http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor  (U.S.A)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsung monitor.com.cn/ (China)
 
1. Insert the CD into the CD-ROM drive.  
2. Click  Windows.   
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
 
4. If you can see following message window, then click the  Continue Anyway button. 
Then click the  OK button. (Microsoft
® Windows® XP/2000 Operating System)  
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation dosent 
damage your system.The certified dr iver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/ . 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows XP | Windows 2000 |Windows Me |Windows NT  | Linux   
 
 
When prompted by the operating system fo r the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
below. 
 
zInternet web site :   http://www.samsung.com/  (Worldwide)
http://www.samsung.com/monitor  (U.S.A)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsung monitor.com.cn/ (China)
 
  Microsoft® Windows®XP Operating System  
 
						

							 1. Insert the CD into the CD-ROM driver.  
2. Click  Start, click 
Control Panel,  and then click the 
Appearance and Themes  Icon.  
 
     
 
3. Click  Display icon and choose the 
Settings tab then click 
Advanced. 
 
     
 
4. Click the  Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click  Update Driver.  and select 
Install from a list or.  then click 
Next button.  
 
     
 
6. Select  Dont search ,I will  then click 
Next and then click 
Have disk.  
 
 
						

							     
 
7. Click the  Browse button then choose A:(D:\Driver) and
 choose your monitor model in the 
model list and click the  Next button.  
 
     
 
8. If you can see following  Message window, then click the 
Continue Anyway button. Then 
click  OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be po sted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the  Close button then click 
OK button continually. 
 
 
 
 
						

							     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose the  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button.  
How to install
1. Click  Start, 
Setting , and then 
Control Panel .  
2. Double click the  Display icon.  
3. Choose the  Settings tab and then click 
Advanced.  
4. Choose  Monitor.  
5. Click  Driver and then click 
Update Driver then click the Next button.  
6. Choose  Display a list of the known drivers for this device so that I can choose a 
specific driver  then click 
Next and then click 
Have disk.  
7. Click the  Browse button then choose A:(D:\Driver).  
8. Click the  Open button, then click 
OK button.  
9. Choose your monitor  model and click the 
Next button then click 
Next button.  
10. Click the  Finish button then the 
Close button.  
If you can see the  Digital Signature Not Found window then click the 
Yesbutton. 
And click the  Finish button then the 
Close button. 
Case1: If the Properties button is inactive, it means your monitor is properly configured. 
Please stop installation 
Case2: If the Properties button is active, cli ck the Properties button then follow next steps 
continually.
 
 
   Microsoft® Windows® Millennium Operating System
 
 
1. Click  Start, 
Setting  and then 
Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click the 
Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the 
Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location.  then click the 
Next button. 
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you 
connected to your computer and click  OK.  
11. Continue choosing  Close button and 
OK button until you close the Display Properties 
dialogue box.  
 
 
   Microsoft® Windows® NT Operating System
 
 
1. Click  Start, 
Settings , 
Control Panel , and then double-click the 
Display icon.  
2. In the Display Registration Information window, click the Settings tab and then click  All 
Display Modes .  
3. Select a mode that you wish to use (Resolutio n, Number of colors and Vertical frequency) 
and then click  OK.  
4. Click the  Apply button if you see the screen working normally after clicking 
Test. If the 
screen is not normal, change to a different m ode (lower mode of resolution, colors, or 
frequency).  
 
						

							If there is no Mode at All Display Modes, select the level of re
solution and vertical 
frequency by referring to the  Preset Timing Modes in the user guide.
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make th e X86Config file, which is a type of system setting file. 
 
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You
 can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can en
ter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not af
fect the actual execution 
of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
 
						

							 Model    
 
 
[ ]This button allows you to adjust items in the menu.
[ ]Press this button to activate a highlighted menu item.
[
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
[ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
 
 AUTO 
 SyncMaster XL20
 
						

							Menu Description
AUTO  When the 
AUTO button is pressed, the Au
to Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
 
- If auto adjustment does not work properly, press AUTO button again to 
adjust picture with more accuracy. 
 
- If you change resolution in the control panel, auto function will be 
executed automatically. 
 
 
 Locked 
- AUTO button 
 
						

							 
- MENU button 
 
Menu Description
Locked This is the function that 
locks the OSD in order to ke ep the current states of 
settings or prevent others from adjusting the current settings.  
 
Lock  : Hold down the MENU
 button for more than five (5) seconds to 
activate the OSD adju stment lock function. 
 
Unlock  : Hold down the MENU
 button for more than five (5) seconds to 
deactivate the OSD adjustment lock function.  
 
You can adjust only the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 
 
 Contrast 
 
						

							 
Menu Description
 
Contrast When the OSD is not visible, push th
e button to adjust the Brightness.
 
 
 Brightness 
Menu Description
 
Brightness When OSD is not visible, push the button to adjust the Contrast.
 
 SOURCE 
 
						

							 
Menu Description
SOURCE Selects the video signal while the OSD is off. 
 
 
  Picture Brightness Contrast
  Color Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset Indicator
  Information
 Picture