Samsung Syncmaster Xl20 Quick Start Guide

  Select and apply the monitor profile and print the profile you are using.
Select the monitor profile for the monitor you are using.
Select a target profile while checking the image information, or select a color space.
 
 
    Step 05. Image Information 
   
 
 Using PrintViewer 
 CautionTo view the image information, you must select an image and then select the 
checkbox next to the image information. The image information is displayed on 
the right of the screen and the image information is generated...

  
  Select the folder that contains your photos using the File View window.
 
 
    Step 02. Select a Photo 
  
  Select photos in the right pane.
 
 
    Step 03. PrintViewer
  
  Select PrintViewer in the left pane.
 
 

 
    Step 04. Select a Monitor Profile and a Target Profile
  
  Select a monitor profile and print the profile you are using.
  Select the type of printing paper, the type of illumination and apply the changes.
 
 
 
 
 Removing the Program  
 
 You can only remove ImageViewer by using the [Add/Remove Programs] applet.
To remove ImageViewer, follow these steps: 
 1. Click on the [Start] menu, and [Settings] and then the [Control Panel]. For Windows™ 
XP, click on the [Start] menu and then the [Control...

  
 
 
    
Installing Natural Color Expert and Installation Requirements
  
  Installing Natural Color Expert on your PC.
 
The following requirements must be met to run Natural Co
lor Expert. Please verify whether the following 
requirements are met before  continuing the installation.
  
  If all requirements listed above 
have been met, run Natural Color Expert on your PC. If the Color 
Calibration OSD is displayed when the monitor menu  key is pressed, it means it is available. 
  
 
Natural Color...

  
gamma, and white point, except for the color band
s. All created icc profiles are saved in the 
C:WINDOWS system32 spool drivers color folder . You can also use an icc profile as the 
\\\\
monitor profile in a CMS program  such as Photoshop. In addition, you can save the settings in 
this tab as the calibration mode  which constitutes a part of the color mode of your monitor. Once 
saved, you can easily select the saved  set of settings using the Mode button.  
However, you can only save one se t of...

 
  
The calibrated values will now be shown. Verify the values, and click the Save button to 
save the settings.
  
 
  
  Type in a name for the pr ofile and click the OK button.
  
 
  
 
You will be asked whether to  save the calibrated settings to your monitor. To save them, 
click the OK button. It takes some time to save these settin
gs. The calibrated settings saved 
on the monitor are saved as the calibration mode  which constitutes a part of the color mode 
of your monitor. From now on, your...

   
  
 
Using the Emulation tab, you can create a new prof
ile that contains your selected settings, apply 
an existin
g profile, or apply a stereotype of a system  profile. Different from a profile created from 
the Calibration tab, you can also chan
ge the R, G, and B color gamma. Of course, you cannot use 
a gamma value beyond the range  of gamma values that can be expressed by your Edison 
monitor. 
  
How to use
  
To emulate using a new set of settings,
select your values.
       
 
  Brightness :...

  
  
Verify the values, and 
click the Save button to save the settings.
  
 
  
  Type in a name for the pr ofile and click the OK button.
  
You will be asked whether to  save the emulated settings to your monitor. To save, click the 
OK button. It will take some  time to save these settin
gs. The emulated settings saved in the 
monitor are saved as the emulation mode which co nstitutes a part of the color mode of your 
monitor. From now on, your monitor will be  displayed with the saved settings...

  
  
 
Using the Uniformity tab, you ca
n improve the uniformity of your Edison monitor. This tab 
measures and improves the un iformity for your monitor.
  
How to use
  
 
Select a number of points of  the window you want to meas ure and click the Start button.
  
These processes are th e same as steps 2 and 3 of Calibration.
  
After measuring the uniformity for the ce nter window, move and atta ch your Calibrator from 
the top left to the right of  your monitor whenever a me ssage appears and...

  
How to use
  
 
Profile Management
  - Allows you to copy, delete, and rename a prof
ile created from the Calibration or Emulation 
tab.
  
 
  
Measure the monitor
  - Measures the current status of your monitor. 
  
Preference
 
Allows you to select the period  of time after which your monitor should be calibrated again in 
the future.