Samsung Syncmaster Xl20 Quick Start Guide

  
  
  
  
  
  
  
  
  
  
  
  
  
   
     
 SyncMaster XL20
 
  
    
  
 
     
SyncMaster XL20 
 

 Model    
 
 
  Notational 
  
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
the equipment. 
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Ground to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for an extended period of time, set your computer to DPMS.  
If using a screen saver, set it to active screen mode. 
 
 SyncMaster XL20
 

 
 Do not use a damaged or loose plug. 
zThis may cause electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug and wire nor place heavy...

    
Be sure to contact an authorized Service Center, when installing your monitor in 
a location with heavy dust, high or low temperatures, high humidity, and exposed 
to chemical substances and where it operates for 24 hours such as at airports, 
train stations etc. 
 
Failure to do so may cause seri ous damage to your monitor. 
 
 
Place your monitor in a location wi th low humidity and a minimum of 
dust. 
zFailure to do so may cause electric shock or fire inside the monitor.  
 
 
Do not drop the...

 
 
Put down the monitor carefully. 
zFailing to do so may damage the monitor.  
 
 
Do not place the monitor face down. 
zThis may damage the TFT-LCD surface.  
 
 
The installation of the bracket must be done by a qualified professional.  
zInstalling the bracket by unqualified personnel may result in injury.  
zAlways use the mounting device specified in the owners manual.  
 
 
When installing the product, make sure to keep it away from the wall 
(more than 10 cm/4 inches ) for ventilation purposes....

 
Use the recommended detergent with a smooth cloth.  
 
 
If the connector between the plug and the pin is dusty or dirty, clean it 
properly using a dry cloth. 
zA dirty connector may cause electric shock or fire.  
 
 
Make sure to unplug the power cord before cleaning the product. 
zOtherwise, this may cause electric shock or fire.  
 
 
Unplug the power cord from the power  outlet and wipe the product using 
a soft, dry cloth. 
zDo not use any chemicals such as wax, benzene, alcohol, thinners,...

the monitor could be exposed to snow or rain.  
 
 
If the monitor is dropped or the casing is damaged, turn the monitor off 
and unplug the power cord. Then contact a  Service Center . 
zThe monitor may malfunction, causing electric shock or fire.  
 
 
Disconnect the plug from the outlet durin g storms or lightning or if it is 
not used for a long period of time. 
zFailure to do so may cause electric shock or fire.  
 
 
Do not try to move the monitor by pu lling only the wire or the signal 
cable....

 
Do not insert metal objects such as chopsticks, wire and tools or 
inflammable objects such as paper or matches into the vent, headphone 
port or AV ports or etc.  
zThis may cause electric shock or fire. If an alien substances or water 
enters the product, turn the product off, unplug the power connector 
from the wall outlet and contact the
 Service Center.  
 
 
When viewing a fixed screen for an extended period of time, residual 
image or blurriness may appear.  
zChange the mode to energy saving...

zOtherwise, this may cause heat emission from the accumulated dirt or 
degraded insulation, causing electric shock or fire.  
 
Do not place your childrens favorite toys or any other objects of interest 
on the product. 
zChildren may try to climb on the pr
oduct to retrieve an object. The 
product could fall, causing injury or even fatality.  
 
 
When lifting up or moving the monitor, do not lift the monitor upside 
down while holding only the stand.  
zThis may cause your monitor to fall, and become...

 Model    
 
 
 
Please make sure the following items are included with your monitor. 
If any items are missing,  contact your dealer. 
Contact a local deale
rto buy optional items.
 
 
 
 Unpacking 
 
 
 
 
 
  Without Stand With Stand  
(Monitor & Sliding Stand) 
 
 
 Manual  
 
 
Quick Setup Guide Warranty Card
 
(Not available in all  locations) Users Guide, 
Monitor Driver, 
Natural Color Expert 
software, 
MagicRotation software, 
Ima
geViewer software
 
    
 Cable
 SyncMaster XL20