Samsung Syncmaster Tc190 User Manual

							3-4Using the product
3-4 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD-ROM supplied with the product. If the suppli ed drive file is corrupted, please visit the Samsung 
Electronics website(http://www.samsun g.com/), and download the driver.
 
1.Insert the driver installation  CD-ROM into the CD-ROM drive.
2. Click on Windows Driver.
3. Select the model of your pr oduct from the model list.
4. Complete the remaining installation steps according to the instructions displayed on the screen.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, 
refer to the document about the Windows operating system.
3-5 Product Operating Buttons
Product Operating Buttons
 The buttons are located on  the bottom of the product. 
 
						

							Using the product3-6
3-6 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
IconDescription
MENU/ Press this button to view the On Screen Display (OSD).
This button is also used to exit the OS
D or to return to a higher-level OSD menu
* Key Lock Function
Locks the buttons to main tain the current settings or to prevent setting changes by other 
users.
On: If you press down on the [M ENU] button for 5 seconds, the Key Lock function will be set 
to On.
Off: If you press the [MENU] button for 5 se conds, the Key Lock function will be set to Off.
Users can set the Customized Key to one of th e following functions. If the user presses the 
Customized Key[ ] after setting it, t he configured function will be performed
 -  -   - 
 You can set the function of the  by selecting  “ 
->  ” in the OSD.
 
When OSD is not on the screen, pus h the button to adjust volume.
▲/▼ Adjust items in the menu. 
/SOURCE Use this button to select a function
Press [  /SOURCE] to select the video signal
 from a connected device while the OSD is 
off. (When the [ /SOURCE] button is pre ssed to change the input mode, a message 
appears in the upper left of the screen displaying the current mode).
AUTO Press [AUTO] button to adjust the screen settings automatically
 This function is only available in analog mode. 
If the resolution settings are changed in t he Display Properties, the  
function is performed.
Press this button to turn the product on or off
Top MenusSub Menus
 PICTURE Brightness Contrast Sharpness MagicBright Coarse
Fine    
 COLORMagicColor Red Green Blue Color Tone
Color Effect Gamma      
 SIZE & POSI-
TION H-Position V-Position Image Size Menu H-Position Menu V-Position
SETUP&RESE
T Reset Menu Transpar-
ency Language Clock Off Timer
On Timer On Timer Source On Timer  Volume Display Time Customized Key
 INFORMA-
TION -
 
						

							3-6Using the product
 PICTURE
MenuDescription
BrightnessControls the screen brightness.
This menu is unavailable when  is set to  mode.
ContrastControls the contrast of the pictures displayed on the screen
This menu is unavailable when  is set to  mode.
This menu is unavailable when  is set to  mode or  mode.
Sharpness Controls the clarity of details  of pictures displayed on the screen
This menu is unavailable when  is set to  mode.
This menu is unavailable when  is set to  mode or  mode.
MagicBright Provides preset picture settings optimized fo r various user environments such as editing a document, 
surfing the Internet, playing games,  watching sports or movies and so on.
• 
If the preset picture modes are not sufficient, you can conf igure the  and  
directly using this mode.
• 
This mode provides the picture settin g appropriate for editing a document.
•
This mode provides the picture setting appropri ate for surfing the Internet (text + picture).
•
This mode provides the picture sett ing appropriate for playing games that include lots of graphics and 
that require a fast screen refresh rate.
•
This mode provides the picture se tting appropriate for watching spor ts games that include lots of 
movement.
•
This mode provides brightness and sharpness se ttings similar to those of a TV for the best 
entertainment environment (movie, DVD, etc.).
• 
Controls the picture contrast aut omatically so that bright and dark pictures are balanced overall.
CoarseRemoves vertical noise lines  (line pattern) from the screen.
The location of the screen may be changed after the  adjustment. In this case, move the screen so 
that the screen is displayed at  the center of the display panel using the  menu.
 This function is only available in analog mode. 
FineRemoves horizontal noise lines  (line pattern) from the screen.
If you cannot remove the noise completely with  the  function, adjust the  and then 
use the  function again.
 This function is only available in analog mode. 
 
						

							Using the product3-6
 COLOR
  feature is not available when  is set to  mode . 
MenuDescription
MagicColorExpresses natural colors more clearly without c hanging the picture quality by using proprietary digital 
picture quality improvement technology  developed by Samsung Electronics.
•  - Turns the MagicColor function off.
•  - You can compare the pictures process ed by MagicColor with the original pictures.
•  - Provides a clearer picture including areas corresponding to skin color.
•  - Improves the chroma of pictures except for areas corresponding to skin color.
Red You can adjust the red color value according to your preference.
This menu is unavailable when  is set to  mode or  mode.
Green You can adjust the green color value according to your preference.
This menu is unavailable when  is set to  mode or  mode.
Blue You can adjust the blue color value according to your preference.
This menu is unavailable when  is set to  mode or  mode.
Color Tone You can set the color temperature according to your preference.
•  - Sets the color temperatur e of the screen to a cooler color.
•  - Sets the color te mperature of the screen to the standard color temperature.
•  - Sets the color temperature of the screen to a warmer color.
•  - Select this menu to set the color temperature manually.
If you do not like the preset co lor temperatures, you can manually adj ust the colors of .
This menu is unavailable when  is set to  mode or  mode.
Color Effect You can change the overall atmos phere by changing the color of pictures.
This menu is unavailable when  is set to  mode or  mode.
•  - Turns the color effect function off.
•  -Displays pictures in black and white. 
•  - Displays pictures in green monochrome color. 
•  - Displays pictures in aqua monochrome color. 
•  - Displays pictures in sepia monochrome color. 
Gamma Using this menu, you can change the in tensity of the colors of medium brightness.
•  -  - 
 
						

							3-6Using the product
 SIZE & POSITION
 SETUP&RESET
MenuDescription
H-PositionMoves the position of the di splay area on the screen horizontally.
 This function is only available in analog mode. 
V-PositionMoves the position of the di splay area on the screen vertically.
 This function is only available in analog mode. 
Image Size•  - The picture is displayed at the aspect ratio of the input signal.
•  - The picture is displayed in full screen r egardless of the aspect ratio of the input signal.
 • A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolu tion, the aspect ratio does not change whether the 
 is set to  or .
 
Menu H-Position You can adjust the  horizontal position of the OSD.
Menu V-Position You can adjust the vertical position of the OSD.
MenuDescription
ResetUse this function to restore the visual qual ity and color settings to the factory defaults.
•  - 
Menu Transparency You can select the transparency of the OSD. •  - 
 
						

							Using the product3-6
 INFORMATION
LanguageSelect a language for the OSD.
 The selected language is only applied to the produ ct OSD. This setting does not affect the other 
functions of the PC.
 
Clock Current Time Setting.
Off Timer Used to set the product so that it  automatically turns off at a certain time.
•  - 
On Timer Used to set the product so that it  automatically turns on at a certain time.
•  - 
On Timer Source Used to adjust the mode when  the product is automatically turned on.
•  - 
On Timer Volume Automatically adju sts the volume to a certain level when the product is turned on.
Display TimeThe OSD automatically disappear s if no action is taken by the user.
You can determine the time to  wait before the OSD is hidden.
•  -  -  - 
Customized Key You can set the function of  the Customized Key to one of the following.
•  -  -   - 
MenuDescription
INFORMATION Shows the frequency and resolution set on the PC. 
MenuDescription
 
						

							4-1Installing the Software
4 Installing the Software
4-1 Using Windows XPe
What is XPe Client?
 An Microsoft Windows XP Embedded(XPe) client uses the Microsoft Windows XP Embedded operating system. When an XPe 
client is connected to a Citrix ICA server  or another server that can provide the Microsoft RDP service, data for the keyboard,  
mouse, audio/video and display are transmitted through the network between the client and the server. 
Connectable Servers 
• A Citrix ICA (Independent Computing Architecture) Server 
• A Microsoft Windows 2000/2003 Server  where the terminal services and Citrix MetaFrame are installed
• A Microsoft Windows NT 4.0 Server wh ere the Citrix MetaFrame is installed 
• A Microsoft RDP (Remote Desktop Protocol) Server  • A Microsoft Windows 2000 Server where the terminal services are installed
• A Microsoft Windows 2003 Server
• A Microsoft Windows XP Professional
 This manual describes the functions provided by the XPe Cli ent. However, it does not explain general functionalities of 
Windows XP Embedded. For more general information on Windows XP Embedded , refer to Windows XP Embedded 
Help provided by Microsoft. 
 
Logon
 When the client starts, you can logon to the server by ente ring your username and password. The default usernames already 
configured are ‘Administrator’ and ‘Us er’, and their passwords are a space.
Windows XP Embedded Desktop
User
When you log in, the User Desktop appears. The default icons  that appear on the User Desktop are Citrix Program 
Neighborhood, Remote Desktop Connection and Internet Explorer.  You can also run this connection from the Start menu. The 
audio volume icon, VNC server icon and syst em time are displayed on the User Taskbar. 
When logged on as a user, there are many re strictions that protect the system from incorrect user actions. You cannot access 
the system drives and there are restrict ions on configuring properties for them.  To configure the client’s advanced and 
detailed settings, log on as an administrator.
Administrator
If you logon as Administrator, the Administrator Desktop appe ars. The default icons that appear on the Administrator Desktop 
are My Computer, My Network Places,  Citrix Program Neighborhood, Remote Deskt op Connection, Internet Explorer, and 
Recycle Bin. You can also run the Citrix Program Neighborhood,  Remote Desktop Connection, and Internet Explorer from the 
Start menu. The audio volume icon, VNC server icon, Enhanced Wr ite Filter status icon, and system time are displayed on the 
Administrator Taskbar. The Administrator privilege  is required for adding and removing programs. 
Log off, Restart, Shut down
• To log off the current session, shut down or rest art your client, use the Start menu. [Click Start  → Shut down]. The Shut 
Down Windows dialog box is displayed. Select an operation fr om the combo box and click OK. You can also log off or shut 
down your client using the Windows Security dialog box displaye d when pressing the [Ctrl + Alt + Del] keys. If ‘Force Auto 
Log on’ is activated, you will be imme diately logged on after each log off.
• The Client Log off, Restart and Shutdown take effect on the  operations of the EWF(Enhanced Write Filter). To keep the 
 
						

							Installing the Software4-1
changed system configuration, you must save a cache fo r the current system session into  flash memory. Failing to do so 
will cause the changed configuration to be lost  when the client is shutdown or restarted. (In the case of logging off, the 
configuration is remembered when loggin in again.) For mo re information on the Enhanced Write Filter, refer to the 
Program Help . 
Programs
The Remote Desktop Connection
You can control a running terminal server  or another computer (Windows 95 or later) remotely through a remote desktop 
connection.
• Remote Desktop 
• Windows XP Professional or Windows 2000/2003 Server must  be installed on the computer to be controlled remotely. 
This computer is called a host.
• A remote computer running on an operating system later than  Windows 95 is required. This remote computer is called 
a client. The client software for the remote de sktop connection must be installed on the client.
• You must also be connected to the Internet. A broadband In ternet connection is good for high performance. However, 
because the remote desktop transmits a mi nimum set of data including the display data and keyboard data to control 
the host remotely, a broadband Internet connection is not  required. You can run a remote desktop on a low bandwidth 
Internet connection.
 When running a remote desktop on Wi ndows XP Professional, you cannot use the operating system of your 
computer.
 
• Enabling Your Computer as the Host 
You must enable the Remote Desktop feature to control it  from another computer. You must be logged on as an 
administrator or a member of the Administrators group to  enable Remote Desktop on your computer. Follow these steps: 
• Open the System folder in the Control  Panel. Click Start, point to Settings, click Control Panel, and then double-click 
the System icon.
• On the Remote tab, select the “Allow users to  connect remotely to this computer” checkbox.
• Ensure that you have the proper permissions to connect to your computer remotely, and click OK.
• Leave your computer running and connected to the client’s network  with Internet access.
• Start a Remote Desktop  Session on the Client 
Once you have enabled your host computer to allow remote c onnections and installed the client software on a Windows-
based client computer, you are ready to start a Remote Desktop session. 
You must first establish a virtual private network connection  or remote access service connection from your client 
computer to your host computer. 
1. Click Start, point to Programs, and then click Remote  Desktop Connection. Or double-click the Remote Desktop 
Connection icon. 
The Remote Desktop Connection window will open. 
 
						

							4-1Installing the Software
2.Enter the host computer name. You can configure de tailed settings by clicking the Options button. 
 The Help file is not available with this Monitor.
 
3.Options 
- General : Enter the login information to connect to the ho st computer. Enter your username and password to login to 
the host automatically.
- Display : The Remote Desktop Connection sends and receives compressed screen data. If you set the resolution and 
color quality to the high option, the speed may become slow. 
 
						

							Installing the Software4-1
- Local Resource : Specify whether to use the hard disks and ports. 
- Programs : Specify whether to display the Desktop or run  an application whenever you are connected. The default is 
‘Desktop’. 
- Experience : You can select your connection spe ed, and select and share environmental options.