Samsung Syncmaster Tc190 User Manual

							1-3Major Safety Precautions
Maintaining the Correct Posture when Using this Product 
Keep small accessories away from the children.Take care when adjusting the angle of the 
product or the height of the stand.
• If your hand or finger is caught, you may be 
injured.
• If the product is tilted excessively, the  product may fall and this may result in 
injury.
Avoid placing a heavy object over the product.
• Otherwise, it may resu lt in a problem with 
the product or injury.
Maintain the correct posture  when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm(18~ 20inches ) from your eyes to the screen. Look down at 
the screen and face the screen forwards.
• Maintain the correct posture when using this product. 
• Adjust the angle of the product so t hat light is not reflected onto the screen.
• Keep your elbow at a right angle and keep  your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while k eeping your knees at an angle of 90 degrees or 
higher and maintain the position of your arm so that your arm is below your heart.
 
						

							Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Monitor
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
CONTENTS
Installation Manual Product Warranty User ManualPower Cord
OPTIONAL PARTS
Keyboard (USB) Mouse (USB)D-Sub Cable
 
						

							2-2Installing the Product
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product is facing downwards.
 Do not remove 
the stopper pin before installing the base. 
Hold the main body of the product with your hand as shown by the figure.
Insert the stand base into the stand connection part in the direction shown in the figure.
Turn the connecting screw at the bottom of the  stand fully so that it is completely fixed. 
 
						

							Installing the Product2-3
 Disassembly is in the reverse order of assembly. 
2-3 Installing a Wall Mount
 Before installation, disassemble the product according to the following steps. 
After the installation of the base, stand the monitor up as shown in the figure. Now you 
can remove the stopper pin to adjust the stand.
- Caution
Avoid lifting the product holding only the stand.
 
						

							2-3Installing the Product
This product provides a wall mount of 100 mm x 100 mm(200 mm x 100 mm) that complies with the VESA specifications.
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to  protect the panel and place the product face down.
3. Separate the stand.
4. Align the groove of the Monitors wall mo unt base with the groove in the wall mount ki  and firmly fix the wall mount kit by 
fastening the screws.
Lift up the monitor stand to the maximum angle with your left hand, and remove the back 
decoration cover with your right hand, as shown in the figure.
Remove the two screws(A).
Remove the stand arm in the direction shown in the figure.
100 mm x 100 mm 200 mm x 100 mm
A. Wall Mount Base
B. Wall Mount Kit (Optional)
 
						

							Installing the Product2-4
 •If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
•For wall mounts that are not compatible with the standard VESA specific ations, the length of the screw may differ depending 
on the corresponding specifications.
•Do not use screws that are incompatible with the standard VESA  specifications and do not assemble them using excessive 
force.
This may result in damage to the product or injury due to th e product falling. Samsung shall not be held liable for any damage 
or injury.
•Samsung shall not be held liable for any damage to the product or  injury caused by using a stand that is not compatible with 
the specified specificat ions or due to an installation not performed by an authorized installation engineer.
•When installing the product using a wall mount, purchase  a wall mount that provides at least 4 inches (10 cm) of space from 
the wall.
•Samsung shall not be held liable for any problems caused by  using a stand that is not compatible with the specified 
specifications.
•Use a wall mount according to specifications of your country.
 
2-4 Connecting to your Network
 The connecting part may differ depending on the product model. 
Connect between the [LAN] port on the prod uct and your network using a LAN cable.
 
						

							2-5Installing the Product
2-5 Connecting Power
Connect one end of the power cord to the POWER port of the product and connect the other end of the power cord to a 220V or 
110V wall outlet.
(The input voltage is switched automatically.)
 
						

							Installing the Product2-6
2-6 Connecting to another Monitor
Connect between the [VIDEO OUT] port on the product and  the D-Sub port on your monitor using a D-Sub cable.
 Connect to the [VIDEO OUT] port to display the same picture on another monitor .
 (For presentation purposes)
 
 
						

							2-7Installing the Product
2-7 Connecting a SERIAL Cable
Devices which support RS-232C connection (interface) can be connected.
 
						

							Installing the Product2-8
2-8 Connecting to your Printer
Devices which support D-SUB 25-pin connection (interface) can be connected.