Samsung Syncmaster T200g User Manual

1. Insert CD into the CD-ROM drive.
2.
Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I...

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model
list and click the "Next" button. 8. If 
you can see following message window, then click the "Continue Anyway" button. Then click
"OK" button.  
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the "Close"...

 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2.
Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel"....

4. Select the "Monitor" tab.
5.
Click the "Change" button in the "Monitor Type" area.
6.
Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click...

Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a printer
or 
other 
images scanned by a scanner or a digital camera are not the same as those shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a color administration system de-
veloped  by  Samsung  Electronics  in  association  with  Korea  Electronics  &  Telecommunications
Research Institute (ETRI). This system is available...

Installation
1.Insert the installation CD into the CD-ROM drive.
2.
Click the MagicTune™ installation file.  Note
If  the 

popup window to install the software for the main screen is not displayed, proceed with the
installation using the MagicTune executable file on the CD.
3. Select installation Language, Click "Next".
4. When the Installation Shield Wizard window appears, click "Next".
5. Select "I agree to the terms of the license agreement" to accept the terms of use.
6....

Uninstall
The MagicTune™ 
program can be removed only by using the "Add or Remove Programs" option of
the Windows ®
 Control Panel.
Perform the following steps remove MagicTune™.
1. Go to [Task Tray] → [Start] → [Settings] and select [Control Panel] in the menu. If the program runs on Windows ®
 XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add or Remove Programs" icon in Control Panel.
3. In  the  "Add  or  Remove  Programs"  screen,  scroll  down  to  find...

5. Click "Install".
6.
The "Installation Status" window appears.
7.
Click "Finish".
8. When  the  installation  is  complete,  the  Multiscreen  executable  icon  appears  on  your  desktop. Double-click the icon to start the program.
Multiscreen execution icon may not appear depending on specification of computer system
or monitor. If that happens, press F5 Key. Installation Problems
The installation 

of MultiScreen can be affected by such factors as the video card, motherboard...

Adjusting the Monitor
Direct Functions
AUTO
When  the  'AUTO'  button  is  pressed,  the  auto  adjustment  screen  appears  as  shown  in  the  animated
screen on the center.
Auto adjustment 
allows the monitor to self-adjust to the incoming Analog signal. The values of  Fine,
Coarse and Position are adjusted automatically.
(Available in  Analog mode only)
To  make  the  automatic  adjustment  function  sharper,  execute  the  'AUTO'  function  while  the  AUTO
PATTERN is on. If auto...

This is the function that locks the OSD in order to keep the current states of settings or prevent others
from adjusting the current settings.
Lock : 
Hold down the MENU button for more than five (5) seconds to activate the OSD adjustment
lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD adjustment
lock function.  Note
Though the 
 OSD adjustment lock function is activated, you can still adjust the brightness and contrast,
and adjust Customized Key ( )...