Samsung Syncmaster S27a750d User Manual

							11
Before Using the Product
 Before Using the Product
 Caution
Leaving the screen fixed on a stationary image for an extended period of time 
may cause afterimage burn-in or defective pixels.
zIf you are not going to use the product for an extended period of time, 
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the 
product for an extended period of time (vacation, etc).
zOtherwise, a fire may result from accumulated dust, overheating, an electric 
shock, or electric leakage. 
Use the product at the recommended resolution and frequency.
zYour eyesight may deteriorate.
Do not put DC power adapters together.
zOtherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
zOtherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
zAn electric shock or fire may result. 
zAvoid using the product outdoors where it can be exposed to rain or snow.
zBe careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
zOtherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
Looking at the screen too close for an extended period of time can deteriorate 
your eyesight.
!!
-_-
!
!
!
!
 
						

							12
Before Using the Product
 Before Using the Product
Do not hold the monitor upside-down or move it by holding the stand.
zThe product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
zAn electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
zEye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended 
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Exercise caution when adjusting the product angle or stand height.
zOtherwise, children's fingers or hands may become stuck and injured.
zTilting the product excessively may cause it to fall and result in personal 
injury. 
Do not place heavy objects on the product.
zProduct failure or personal injure may result.
!
!
!
 
						

							13
Before Using the Product
 Before Using the Product
Correct posture to use the product 
Use the product in the correct posture as follows:
zStraighten your back.
zAllow a distance of 45 to 50cm between your eye and the screen, and look slightly 
downward at the screen. 
Keep your eyes directly in front of the screen. 
zAdjust the angle so light does not reflect on the screen.
zKeep your forearms perpendicular to your upper arms and level with the back of 
your hands.
zKeep your elbows at about a right angle.
zAdjust the height of the product so you can keep your knees bent at 90 degrees or 
more, your heels attached to the floor, and your arms lower than your heart.
50 cm
 
						

							Table Of Contents14
Table Of Contents
BEFORE USING THEPRODUCT2 Copyright
2 Icons used in this manual
2 Symbols for safety precautions
4 Cleaning
4 Cleaning
5 Securing the Installation Space
5 Precautions for storage 
5 Safety Precautions
5 Electricity and Safety
7 Installation 
9Operation
13 Correct posture to use the product 
PREPARATIONS19 Checking the Contents 
19 Removing the Packaging
20 Checking the Components
21 Parts
21 Frontal Buttons
23 Reverse Side
23 Tidying Up the Connected Cables
24 Kensington Lock
25 Adjusting the Product Tilt
3D26 3D
263D Mode
27 L/R Change
28 3D→2D
29 Standard HDMI-Compatible Formats
29 Resolution Supported for PC Input (via 
the HDMI Port)
29 Playing 3D Games on a PC
30 Precautions when  Viewing 3D Video
 
						

							Table Of Contents
Table Of Contents15
CONNECTING AND USING
A SOURCE DEVICE
31 Before Connecting
31 Pre-connection Checkpoints
31 Connecting the Power
32 Connecting and Using a PC
32 Connecting to a PC
33 Driver Installation
34 Setting Optimum Resolution
34 Changing the Resolution Using a PC
36 Connecting to a Video Device
36 Connection Using the HDMI Cable
36 Connecting Headphones
SCREEN SETUP37 MAGIC
37 SAMSUNG MAGIC Angle
38 SAMSUNG MAGIC Bright
39 Configuring  SAMSUNG MAGIC Color
40 Brightness
40 Configuring Brightness
40 Contrast
41 Configuring Contrast
41 Sharpness
41 Configuring Sharpness
42 Response Time
42 Configuring Response Time
42 HDMI Black Level
CONFIGURING TINT44 Red
44 Configuring Red
44 Green
44 Configuring Green
 
						

							Table Of Contents
Table Of Contents16
45 Blue
45 Configuring Blue
45 Color Tone
46 Configuring the Color Tone  Settings
47 Gamma
47 Configuring Gamma
RESIZING OR
RELOCATING THE SCREEN48 Size
48 Changing the  Image Size
49 H-Position
49 Configuring H-Position
49 V-Position
49 Configuring V-Position
50 Menu H-Position
50 Configuring Menu H-Position
50 Menu V-Position
51 Configuring Menu V-Position
SETUP AND RESET52 ECO
52Eco Motion Sensor
53 Eco Light Sensor
55 Eco Saving
56 Eco Icon Display
58 Menu Transparency 
58 Changing  Menu Transparency
58 Language
58 Changing the  Language
59 PC/AV Mode
59 Configuring PC/AV Mode Settings
60 Auto Source 
60 Configuring  Auto Source
 
						

							Table Of Contents
Table Of Contents17
60 Display Time 
60 Configuring Display Time
61 Key Repeat Time 
61 Configuring Key Repeat Time
62 Customized Key
62 Configuring Customized Key 
62 Off Timer On/Off 
62 Configuring  Off Timer On/Off
63 Off Timer Setting 
63 Configuring Off Timer Setting
64 Reset
64 Initializing Settings ( Reset)
INFORMATION MENU AND
OTHERS65 INFORMATION
65 Displaying INFORMATION
65 Configuring Brightne ss in the Startup 
Screen
65 Configuring Volume  in the Startup 
Screen
TROUBLESHOOTING GUIDE67 Requirements Before Contacting 
Samsung Customer Service Center
67 Testing the Product
67 Checking the Resolution and Frequency
67 Check the followings.
70 Q & A
SPECIFICATIONS72 General
73 PowerSaver
75 Standard Signal Mode Table
 
						

							Table Of Contents
Table Of Contents18
APPENDIX
79 Contact SAMSUNG WORLDWIDE
84 Correct Disposal of 
This Product (Waste 
Electrical & Electronic Equipment) - 
Europe only
85 Terminology
INDEX
 
						

							191 Preparations
1 
Preparations
1.1 Checking the Contents 
1.1.1 Removing the Packaging
1Open the packaging box. Be careful not to damage the product when you open the packaging with 
a sharp instrument. 
2Remove the Styrofoam from the product.
3Check the components and remove the Styrofoam and plastic bag.
 zThe appearance of actual components may differ from the image shown.
zThis image is for reference only. 
4Store the box in a dry area so that it can be used when moving the product in the future.
 
						

							20
Preparations
1
1 Preparations
1.1.2 Checking the Components
 zContact the dealer from whom you purchased the product if any item is missing.
zThe appearance of the components and items sold  separately may differ from the image shown. 
Components
 zComponents may differ in different locations.
zThe cleaning cloth is only supplied with the black high-glossy model. 
Quick Setup guideWarranty
(Not available In some locations) User Manual
Cleaning cloth
Power cableDC power adapter
3D Glasses & 3D Glasses
User Manual DP cable
Wire holders