Samsung Syncmaster S27a750d User Manual

User Manual
SyncMaster
S23A750D / S27A750D
The color and the appearance may differ depending onthe product, and the speci fications are subject to
change without prior notice to improve the performance.
BN46-00036A-05
 

2 Before Using the Product
 
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality. 2011 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in  parts or entirety without the authorization of Samsung Electronics is 
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft and Windows are registered trademarks of Microsoft Corporation....

3
Before Using the Product
 Before Using the Product
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed. 

4
Before Using the Product
 Before Using the Product
Cleaning
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. 
Take the following steps when cleaning. 
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
 Hold the power cable by the plug and do not touch the cable with wet 
hands. Otherwise, an electric shock may result.
 
3. Wipe the monitor with a clean, soft and dry cloth.
zDo not apply a cleaning agent that...

5
Before Using the Product
 Before Using the Product
Securing the Installation Space
zEnsure some space around the product for ventilation.An internal temperature rise may cause fire 
and damage the product. Be sure to allow the amount of space as shown below or greater when 
installing the product.
 The exterior may differ depending on the product. 
Precautions for storage 
High-glossy models can develop white stains on the surface if an  ultrasonic wave humidifier is used 
nearby.
 Be sure to contact...

6
Before Using the Product
 Before Using the Product
 Warning
Do not use a damaged power cord or plug, or a loose power socket.
zAn electric shock or fire may result.
Do not plug many products into the same power socket.
zOtherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
zOtherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
zAn unstable connection may cause a fire.
Connect the power plug to a grounded power socket...

7
Before Using the Product
 Before Using the Product
 Caution
Installation 
 Warning
Do not unplug the power cord when the product is in use.
zThe product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied 
by Samsung. 
zAn electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed. 
zIf any problem occurs in the product, unplug the power cable to completely 
cut the power to the product....

8
Before Using the Product
 Before Using the Product
 Caution
Do not install the product on an unstable or vibrating surface (insecure shelf, 
sloped surface, etc.). 
zThe product may fall and break or cause a personal injury.
zUsing the product in an area with excess vibration may damage the product 
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water 
drips, etc.), oil, or smoke. 
zAn electric shock or fire may result.
Do not expose the product to direct...

9
Before Using the Product
 Before Using the Product
Operation
 Warning
Put down the product carefully.
zThe product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine 
particles, chemical substances or extreme temperatures, or an airport or train 
station where the product should operate continuously for an extended period of 
time) may seriously affect its performance.
zBe sure to consult Samsung Customer Service Center (page 79)...

10
Before Using the Product
 Before Using the Product
During a lightning or thunderstorm, power off the product and remove the power 
cable.
zAn electric shock or fire may result.
Do not drop objects on the product or apply impact.
zAn electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
zOtherwise, the power cable may be damaged and product failure, an electric 
shock or fire may result.
If a gas leakage is found, do not touch the product or power plug....