Samsung Syncmaster S27a650d User Manual

51
Configuring Tint
4
4 Configuring Tint
4.3 Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
 This menu is not available when Color is in Full or Intelligent  mode. 
4.3.1 Configuring Blue
1Press [ ] on the product.
2Press [ ] to move to  COLOR and press [ ] on the product.
3Press [ ] to move to  Blue and press [ ] on the product. Th e following screen will appear.
4Adjust the Blue using the [ ] button.
SAMSUNGMAGIC
MENU

...

52
Configuring Tint
4
4 Configuring Tint
4.4 Color Tone
Adjust the general color tone of the picture. 
 This menu is not available when Color is in Full or Intelligent  mode. 
4.4.1 Configuring the  Color Tone Settings
1Press [ ] on the product.
2Press [ ] to move to COLOR and press [ ] on the product.
3Press [ ] to move to  Color Tone and press [ ] on the product. The following screen will 
appear.
Cool2 : Set the color temperature to be cooler than  Cool1.
Cool1: Set the color temperature to be...

53
Configuring Tint
4
4 Configuring Tint
4.5 Gamma
Adjust the mid-range brightness (Gamma) of the picture.
4.5.1 Configuring Gamma
1Press [ ] on the product.
2Press [ ] to move to COLOR and press [ ] on the product.
3Press [ ] to move to  Gamma and press [ ] on the  product. The following screen will appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
MENU





COLOR
Red
Green
Blue
Color Tone
Gamma
Mode1 
Mode2
Mode350
50
50
Normal
AUTO
 

545 Resizing or Relocating the Screen
5 
Resizing or Relocating the Screen
5.1 Image Size
Change the picture size.
5.1.1 Changing the Picture Size
1Press [ ] on the product.
2Press [ ] to move to SIZE&POSITION and press [ ] on the product.
3Press [ ] to move to  Image Size and press [ ] on the product. The following screen will 
appear.
Auto : Display the picture according to the aspect ratio of the input source.
Wide : Display the picture in full screen regardless of the aspect ratio of the input...

55
Resizing or Relocating the Screen
5
5 Resizing or Relocating the Screen
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
5.2 H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
 This menu is only available when  Image Size is set to Screen Fit .
Only available in Analog mode. 
5.2.1 Configuring H-Position or V-Position
1Press [ ] on the product.
2Press [ ] to move to  SIZE&POSITION and...

56
Resizing or Relocating the Screen
5
5 Resizing or Relocating the Screen
5.3 Menu H-Position & Menu V-Position
Menu H-Position: Move the menu position to the left or right. 
Menu V-Position : Move the menu position up or down. 
5.3.1 Configuring Menu H-Position or Menu V-Position
1Press [ ] on the product.
2Press [ ] to move to  SIZE&POSITION and press [ ] on the product.
3Press [ ] to move to  Menu H-Position or Menu V-Position , and press [ ]. The following 
screen will appear.
4Press [ ] to...

576 Setup and Reset
6 
Setup and Reset
6.1 ECO
The Eco Motion Sensor , Eco Light Sensor, and Eco Saving options are displayed on the same menu 
page so that you can conveniently configure the power saving settings.
6.1.1 Eco Motion Sensor
The  Eco Motion Sensor  activates to save power when it does not detect any movement within a 
specified area for a specified period of time.
 Eco Motion Sensor  is not available when the moni tor is used in portrait mode. 
Configuring Eco Motion Sensor
1Press [ ] on...

58
Setup and Reset
6
6 Setup and Reset
Configuring Backlight
1Press [ ] on the product.
2Press [ ] to move to 
SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Backlight and press [ ] on the product. The following screen will 
appear.
Off : Turn off the screen and activate DPMS mode. If  Off is selected, it takes several seconds for 
the monitor to detect movement and turn on after it turned off.
Dimming: Reduce the brightness of...

59
Setup and Reset
6
6 Setup and Reset
6.1.2 Eco Light Sensor
The Eco Saving  feature optimizes the view condition and contributes to power saving by adjusting the 
screen brightness depending on the ambient light intensity.
 This menu is not available when  Eco Saving is set .
This menu is not available when  Bright is in Dynamic Contrast  mode. 
Configuring Eco Light Sensor
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press...

60
Setup and Reset
6
6 Setup and Reset
Configuring Sensitivity
1Press [ ] on the product.
2Press [ ] to move to 
SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Sensitivity and press [ ] on the product . The following screen will 
appear.
High : High sensitivity that maximi zes the varying level of screen  brightness depending on the 
ambient light intensity.
Medium : Intermediate sensitivity that sets a va rying level of screen...