Samsung Syncmaster S27a650d User Manual

							51
Configuring Tint
4
4 Configuring Tint
4.3 Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
 This menu is not available when Color is in Full or Intelligent  mode. 
4.3.1 Configuring Blue
1Press [ ] on the product.
2Press [ ] to move to  COLOR and press [ ] on the product.
3Press [ ] to move to  Blue and press [ ] on the product. Th e following screen will appear.
4Adjust the Blue using the [ ] button.
SAMSUNGMAGIC
MENU





COLOR
Red
Green
Blue
Color Tone
Gamma 0RGH50 50
Normal
50
AUTO
 
						

							52
Configuring Tint
4
4 Configuring Tint
4.4 Color Tone
Adjust the general color tone of the picture. 
 This menu is not available when Color is in Full or Intelligent  mode. 
4.4.1 Configuring the  Color Tone Settings
1Press [ ] on the product.
2Press [ ] to move to COLOR and press [ ] on the product.
3Press [ ] to move to  Color Tone and press [ ] on the product. The following screen will 
appear.
Cool2 : Set the color temperature to be cooler than  Cool1.
Cool1: Set the color temperature to be cooler than  Normal mode.
Normal: Display the standard color tone.
Warm1: Set the color temperature to be warmer than  Normal mode.
Warm2: Set the color temperature to be warmer than  Warm1.
Custom : Customize the color tone.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
SAMSUNGMAGIC
MENU





COLOR
Red
Green
Blue
Color Tone
Gamma
Cool 2 
Cool 1 
Normal
Warm 1 
Warm 2
Custom50
50
50
AUTO
 
						

							53
Configuring Tint
4
4 Configuring Tint
4.5 Gamma
Adjust the mid-range brightness (Gamma) of the picture.
4.5.1 Configuring Gamma
1Press [ ] on the product.
2Press [ ] to move to COLOR and press [ ] on the product.
3Press [ ] to move to  Gamma and press [ ] on the  product. The following screen will appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
MENU





COLOR
Red
Green
Blue
Color Tone
Gamma
Mode1 
Mode2
Mode350
50
50
Normal
AUTO
 
						

							545 Resizing or Relocating the Screen
5 
Resizing or Relocating the Screen
5.1 Image Size
Change the picture size.
5.1.1 Changing the Picture Size
1Press [ ] on the product.
2Press [ ] to move to SIZE&POSITION and press [ ] on the product.
3Press [ ] to move to  Image Size and press [ ] on the product. The following screen will 
appear.
Auto : Display the picture according to the aspect ratio of the input source.
Wide : Display the picture in full screen regardless of the aspect ratio of the input source.
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
16:9 : Display the picture with an aspect ratio of 16:9. Suitable for DVD content or widescreen 
broadcasts. (SA650)
Wide : Display the picture in full screen regardless of the aspect ratio of the input source. 
(SA850)
Screen Fit : Display the picture with the original aspect ratio without cutting off.
 Requirements to activate  Image Size
When connecting to digital output device via DVI/DP cable
When signal resolution is 480p, 576p , 720p, 1080i, 1080p 
SA650 SA850
MENU
ReturnEnterAdjust





SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   1050 50
Auto
Wide
AUTO
ReturnEnterAdjust



SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   50
4 : 3 
16 : 9
Screen Fit
10
ReturnEnterAdjust



SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   50
4 : 3 
Wide
Screen Fit
10
 
						

							55
Resizing or Relocating the Screen
5
5 Resizing or Relocating the Screen
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
5.2 H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
 This menu is only available when  Image Size is set to Screen Fit .
Only available in Analog mode. 
5.2.1 Configuring H-Position or V-Position
1Press [ ] on the product.
2Press [ ] to move to  SIZE&POSITION and press [ ] on the product.
3Press [ ] to move to  H-Position or V-Position , and press [ ]. The following screen will 
appear.
4Press [ ] to configure  H-Position or V-Position .
MENU
ReturnEnterAdjust





SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   1050
Wide
50
50
AUTOReturnEnterAdjust





SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   10
Wide
50
50
50
AUTO
 
						

							56
Resizing or Relocating the Screen
5
5 Resizing or Relocating the Screen
5.3 Menu H-Position & Menu V-Position
Menu H-Position: Move the menu position to the left or right. 
Menu V-Position : Move the menu position up or down. 
5.3.1 Configuring Menu H-Position or Menu V-Position
1Press [ ] on the product.
2Press [ ] to move to  SIZE&POSITION and press [ ] on the product.
3Press [ ] to move to  Menu H-Position or Menu V-Position , and press [ ]. The following 
screen will appear.
4Press [ ] to configure  Menu H-Position or Menu V-Position .
MENU
ReturnEnterAdjust





SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   10
Wide
50
50
50
AUTOReturnEnterAdjust





SIZE&POSITION
Image Size
H-Position
V-Position
Menu H-Position
Menu V-Position
   Wide
50
50
50
10
AUTO
 
						

							576 Setup and Reset
6 
Setup and Reset
6.1 ECO
The Eco Motion Sensor , Eco Light Sensor, and Eco Saving options are displayed on the same menu 
page so that you can conveniently configure the power saving settings.
6.1.1 Eco Motion Sensor
The  Eco Motion Sensor  activates to save power when it does not detect any movement within a 
specified area for a specified period of time.
 Eco Motion Sensor  is not available when the moni tor is used in portrait mode. 
Configuring Eco Motion Sensor
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Eco Motion Sensor and press [ ]. The following screen will appear.
 This option is disabled if the product is connected to a PC that is in power-saving mode. 
Off: Deactivate the  Eco Motion Sensor  function.
5 Min: Automatically turn off the power if the sensor has not detected any movement of an 
object or person for 5 minutes within the specified range of detection.
10 Min: Automatically turn off the power if the sensor has not detected any movement of an 
object or person for 10 minutes within the specified range of detection.
20 Min : Automatically turn off the power if the sensor has not detected any movement of an 
object or person for 20 minutes within the specified range of detection.
30 Min : Automatically turn off the power if the sensor has not detected any movement of an 
object or person for 30 minutes within the specified range of detection.
1 h  : Automatically turn off the power if the sensor has not detected any movement of an object 
or person for 1 hour within the specified range of detection.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
MENU
ReturnEnterMove





ECO
Eco Motion Sensor
Û%DFNOLJKW
(FR/LJKW6HQVRU 
Ü6HQVLWLYLW\
Ü%ULJKWQHVV/HYHO
(FR6DYLQJ
(FR,FRQLVSOD\ %¿
5 Min
Off
Off
Off
5 Min
10 Min
20 Min
30 Min
1 h
AUTO
 
						

							58
Setup and Reset
6
6 Setup and Reset
Configuring Backlight
1Press [ ] on the product.
2Press [ ] to move to 
SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Backlight and press [ ] on the product. The following screen will 
appear.
Off : Turn off the screen and activate DPMS mode. If  Off is selected, it takes several seconds for 
the monitor to detect movement and turn on after it turned off.
Dimming: Reduce the brightness of the screen (still turned on).
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
 The performance of Eco Motion Sensor  is maximized to a specific user distance (1m) and angle 
(40 degrees).
The sensor may not detect you if you are motionless.
If you think that the mode entry message appears too frequently, increase the time setting of the 
Eco Motion Sensor  or turn the Eco Icon Display  Off.
Avoid using radio equipment such as a walkie-talkie near the product as this may cause a product 
malfuction.
 
MENU
ReturnEnterMove





ECO
Eco Motion Sensor
ÜBacklight
(FR/LJKW6HQVRU 
Ü6HQVLWLYLW\
Ü%ULJKWQHVV/HYHO
(FR6DYLQJ
(FR,FRQLVSOD\ %¿
5 Min
Off
Off
Off
Dimming
AUTO
 
						

							59
Setup and Reset
6
6 Setup and Reset
6.1.2 Eco Light Sensor
The Eco Saving  feature optimizes the view condition and contributes to power saving by adjusting the 
screen brightness depending on the ambient light intensity.
 This menu is not available when  Eco Saving is set .
This menu is not available when  Bright is in Dynamic Contrast  mode. 
Configuring Eco Light Sensor
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Eco Light Sensor and press [ ]. The followi ng screen will appear.
Off: Deactivate the  Eco Light Sensor  function.
On: Automatically adjust the brightness according to the ambient light intensity.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
SAMSUNGMAGIC
MENU
5HWXUQ(QWHU0RYH





(&2
Eco Motion Sensor
Û%DFNOLJKW
(FR/LJKW6HQVRU
Û6HQVLWLYLW\

						

							60
Setup and Reset
6
6 Setup and Reset
Configuring Sensitivity
1Press [ ] on the product.
2Press [ ] to move to 
SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  ECO and press [ ] on the product.
4Press [ ] to move to  Sensitivity and press [ ] on the product . The following screen will 
appear.
High : High sensitivity that maximi zes the varying level of screen  brightness depending on the 
ambient light intensity.
Medium : Intermediate sensitivity that sets a va rying level of screen brightness between High 
and  Low  depending on the ambient light intensity.
Low: Low sensitivity that minimizes the varying  level of screen brightness depending on the 
ambient light intensity.
5Press [ ] to move to the opti on you want and press the [ ].
6The selected option will be applied.
MENU
5HWXUQ(QWHU0RYH






(&2
Eco Motion Sensor
Û%DFNOLJKW
(FR/LJKW6HQVRU
Û6HQVLWLYLW\