Samsung Syncmaster S24a650d User Manual

							71
Setup and Reset
6
6 Setup and Reset
6.8 Customized Key
You can customize Customized Key as follows.
6.8.1 Configuring Customized Key
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Customized Key and press [ ] on the product. The following screen 
will appear.
ECO  - MAGIC  - Image Size
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
MENU


SETUP&RESET
Acceleration 
On
Customized Key
Off Timer On/Off
Off Timer Setting 
Reset
  
Adjust
Enter
Return
ECO
MAGIC
Image Size
AUTO
 
						

							72
Setup and Reset
6
6 Setup and Reset
6.9 Off Timer On/Off 
Enable or disable the off timer that automatically powers off the product.
6.9.1 Configuring Off Timer On/Off
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Off Timer On/Off and press [ ] on the product. The following screen 
will appear.
Off : Deactivate the off timer so that the  product does not power off automatically.
On: Activate the off timer so that the product powers off automatically.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
MENU
ReturnEnterAdjust
Customized Key  
Off Timer On/Off
Off Timer Setting
Reset
  

Off 
On ECO
SETUP&RESET
AUTO
 
						

							73
Setup and Reset
6
6 Setup and Reset
6.10 Off Timer Setting 
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the 
specified number of hours.
 This menu is only available when  Off Timer On/Off is set to On. 
6.10.1 Configuring Off Timer Setting
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Off Timer Setting and press [ ] on the product. The following screen 
will appear.
4Press [ ] to configure  Off Timer Setting.
MENU



SETUP&RESET
ECO
On
Customized Key 
Off Timer On/Off
Off Timer Setting 
Reset
   4 h
Adjust
Enter
ReturnAUTO
 
						

							74
Setup and Reset
6
6 Setup and Reset
6.11 Reset
Return all the settings for the product to the default factory settings.
6.11.1 Initializing Settings (Reset)
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Reset and press [ ] on the product. The following screen will appear.
4Press [ ] to move to the opti on you want and press the [ ].
5The selected option will be applied.
MENU


SETUP&RESET
ECO
Off
Customized Key 
Off Timer On/Off
Off Timer Setting 
Reset
  
Adjust
Enter
Return
No
Ye s
AUTO
 
						

							757 INFORMATION Menu and Others
7 
INFORMATION Menu and Others
7.1 INFORMATION
View the current input source, frequency and resolution.
7.1.1 Displaying INFORMATION
1Press [ ] on the product.
2Press [ ] to move to INFORMATION. The current input source, frequency and resolution will 
appear.
7.2 Configuring Brightness in the Startup Screen
SA650[ ], SA850[ ]
Adjust  Brightness  using the [  or  ] button in the startup screen where there is no on screen display 
menu available.
1Press [  or  ] in the startup screen. The following screen will appear. 
2Adjust the  Brightness  using the [ ] button. 
 On SA850 models,  Volume (VOL ) can be adjusted if a cable is connected to the [DP IN] or [AUDIO IN] 
port.
 
MENU
SETUP&RESET
Analog 
67.6kHz 60Hz PP
1920 x 1080
Exit
EnterAdjust
PICTURE COLOR
SIZE&POSITION
INFORMATION
AUTOEXIT
%ULJKWQHVV
100
EXIT
 
						

							768 Troubleshooting Guide
8 
Troubleshooting Guide
8.1 Requirements Before Contacting Samsung Customer Service Center
8.1.1 Testing the Product
 Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, 
contact Samsung Customer Service Center.
 
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected 
to a PC, perform a self-diagnosis test.
1Power off both the PC and product.
2Disconnect the cable from the product.
3Power on the product.
4If the Check Signal Cable  message appears, the product is working normally.
 If the screen remains blank, check the PC system, video controller and cable. 
8.1.2 Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "9.3 Standard Signal Mode Table"), the 
message Not Optimum Mode.  will appear for a short time.
8.1.3 Check the followings.
Installation issue (PC mode)
The Screen Keeps Switching On And Off.  Check the cable connection between the product  and PC, and ensure the connection is secure. 
(Refer to "2.2 Connecting and Using a PC")
Screen issue
The power LED is off. Th e screen will not switch 
on. Check that the power cable is connected 
correctly (Refer to "2.2 Connecting and Using a 
PC")
The message  Check Signal Cable  appears.  Check that the cable is properly connected to the 
product. (Refer to "2.2 Connecting and Using a 
PC")
Check that the device connected to the product is 
powered on.
 
						

							77
Troubleshooting Guide
8
8 Troubleshooting Guide
"
Not Optimum Mode " is displayed. This message appears if the signal from the 
graphics card exceeds the maximum resolution or 
frequency for the product.
Change the maximum resolution and frequency to 
suit the product performance, referring to 
Standard Signal Mode Table (page 84).
The images on the screen look distorted. Check the cable connection to the product (Refer  to "2.2 Connecting and Using a PC")
The screen is not clear. The screen is blurry. Adjust  Coarse(page 46) and Fine(page 47).
Remove any accessories (video extension cable, 
etc) and try again.
Set the resolution and frequency to the 
recommended level. (Refer to "9.1 General")
The screen appears unstable and shaky. Check that the resolution and frequency for the  PC are within the range of resolution and 
frequency compatible with the product, and if 
required, change the settings, referring to 
Standard Signal Mode Table (page 84) in this 
manual and the INFORMATION  menu on the 
product.
There are shadows or ghost images left on the 
screen.
The screen is too bright. The screen is too dark. Adjust 
Brightness(page 43) and  Contrast(page 
44).
Screen color is inconsistent. Change the  COLOR settings. 
(Refer to " Configuring Tint" ON PAGE 49)
The colors on the screen have a shadow and are 
distorted. Change the 
COLOR settings. 
(Refer to " Configuring Tint" ON PAGE 49)
White does not really look white. Change the COLOR settings. 
(Refer to " Configuring Tint" ON PAGE 49)
There is no image on the screen and the power 
LED blinks every 0.5 to 1 second. The product is in power-saving mode.
Press any key on the ke
yboard or move the 
mouse to return to the previous screen.
Sound issue
There is no sound.  Check the connection of the audio cable or adjust  the volume. 
Check the volume.
Screen issue
 
						

							78
Troubleshooting Guide
8
8 Troubleshooting Guide
The volume is too low.
 Adjust the volume.
If the volume is still low after turning it up to the 
maximum level, adjust th e volume on your PC 
sound card or software program.
Source device issue
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is  booting, have your PC serviced.
Sound issue
 
						

							79
Troubleshooting Guide
8
8 Troubleshooting Guide
8.2 Q & A
QuestionAnswer
How can I change the 
frequency? Set the frequency on your graphics card.
Windows XP: Select 
Control Panel  Appearance and 
Themes   Display   Settings   Advanced   Monitor , 
and adjust Refresh rate  under Monitor settings .
Windows ME/2000: Select  Control Panel  Display  
Settings   Advanced   Monitor, and adjust  Refresh rate 
under  Monitor settings .
Windows Vista: Select  Control Panel  Appearance and 
Personalization   Personalization   Display Settings   
Advanced Settings   Monitor , and adjust  Refresh rate 
under  Monitor settings .
Windows 7: Select  Control Panel  Appearance and 
Personalization   Display   Screen Resolution   
Advanced settings   Monitor , and adjust  Refresh rate  under 
Monitor settings .
 
						

							80
Troubleshooting Guide
8
8 Troubleshooting Guide
 Refer to the user manual for your PC or graphics card for further instructions on adjustment.. 
How can I change the 
resolution?Windows XP: Go to Control Panel  Appearance and 
Themes   Display   Settings  and adjust the resolution.
Windows ME/2000: Go to  Control Panel  Display   
Settings  and adjust the resolution.
Windows Vista: Go to  Control Panel  Appearance and 
Personalization   Personalize   Display Settings  and 
adjust the resolution.
Windows 7: Go to  Control Panel  Appearance and 
Personalization   Display   Adjust Resolution  and adjust 
the resolution.
How do I set power-saving 
mode?
Windows XP: Set powe r-saving mode in Control Panel  
Appearance and Themes   Display   Screen Saver 
Settings  or BIOS SETUP on the PC. 
Windows ME/2000: Set po wer-saving mode in Control Panel 
  Display   Screen Saver Settings  or BIOS SETUP on the 
PC.
Windows Vista: Set po wer-saving mode in Control Panel  
Appearance and Personalization   Personalize   Screen 
Saver Settings  or BIOS SETUP on the PC.
Windows 7: Set power-saving mode in  Control Panel  
Appearance and Personalization   Personalize   Screen 
Saver Settings  or BIOS SETUP on the PC.
QuestionAnswer