Samsung Syncmaster S24a650d User Manual

							21
Preparations
1
1 Preparations
1.2 Parts
1.2.1 Frontal Buttons
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
IconsDescription
Open or close the onscreen display (OSD) menu, or return to the last 
menu.
OSD control lock: Maintain the current settings, or lock the OSD 
control to prevent unintended changes to settings.
To lock the OSD control, press the MENU button [ ] for five 
seconds. 
To unlock the locked OSD control, press the MENU button [ ] 
for more than five seconds.
 If the OSD control is locked,
Brightness and Contrast can be adjusted, and INFORMATION 
can be viewed.
The function that was configured as Customized Key  before 
locking the OSD control can be used by pressing the [ ] 
button.
 
SA650
SA850
MENU
MENU
MENU
ECO
 
						

							22
Preparations
1
1 Preparations
IconsDescription
  Configure 
Customized Key  and press [ ]. The following options will 
be enabled.
ECO  - MAGIC -  Image Size
 To configure  Customized Key , go to SETUP&RESET   
Customized Key and select the mode you want.
 
Move to the upper or lower menu or adjust the value for an option on the 
OSD menu.
Adjust the screen brightness.
Adjust the screen brightness.
 On SA850 models,  Volume (VOL) can be adjusted if a cable is 
connected to the [DP IN] or [AUDIO IN] port.
 
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will 
change the input source ( Analog/DisplayPort /Digital ). If you power on 
the product or change the input source by pressing the [ ] button, 
a message that shows th e changed input source will appear at the top 
left corner of the screen. 
Press the [ ] button to automatically adjust the screen settings. 
 Available only in  Analog mode.
Changing the resolution in Display Properties will activate the 
Auto Adjustment  function.
 
Turn the screen on or off. 
 (Power Indicator) The power indicator will be lit when 
the product is operating normally.
 Refer to "9.2 PowerSaver"for details about the power-saving 
function.
To reduce power consumption, it is best to remove the power 
cable when you will not be using the product for an extended 
period of time.
 
ECO
ECO
ª

AUTO
AUTO
 
						

							23
Preparations
1
1 Preparations
1.2.2 Reverse Side
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
SA650
SA850
DC 14VDP IN DVI INRGB IN
 
						

							24
Preparations
1
1 Preparations
PortDescription
Connects to the DC power adapter.
Connects to a PC via a DP cable.
Connects to a PC via a DVI cable.
Connects to a PC using the D-SUB cable.
Connects to the stereo cable 
Connects to an audio output device such as headphones.
Connect to a USB device. Compatible with a USB cable version 3.0 
or lower.
Connects to a PC via a USB cable.
 This port can only connect to a PC. 
 
						

							25
Preparations
1
1 Preparations
1.3 Installation
1.3.1 Attaching the Stand
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
Place a protective cloth or 
cushion on a flat surface. Next, 
place the product with the face 
down on top of the cloth or 
cushion.Insert the stand 
base into the 
stand in the direction of the 
arrow. Do not remove the fixing pin until 
you are finished attaching the 
stand.
Tightly fasten the screw to the 
bottom of the base.
After installing the stand, place 
the product upright.You can remove the fixing pin 
and adjust the stand now.
- Caution
Do not hold the product upside 
down only by the stand.
 
						

							26
Preparations
1
1 Preparations
1.3.2 Adjusting the Product Tilt and Height
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
To adjust the height, remove the fixing pin.
The monitor tilt and height can be adjusted.
Hold the top center of the product and adjust the height carefully. 
1.3.3 Rotating the Monitor
You can rotate your monitor as shown below.
 Be sure to fully extend the stand before rotating the monitor.
If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the 
floor and get damaged.
Do not rotate the monitor counterclockwise. The monitor may get damaged. 
 
						

							27
Preparations
1
1 Preparations
1.3.4 Installing a Wall-mount Kit or Desktop Stand
Before Installation
 Power the product off and remove the power cable from the power socket. 
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding 
parts on the wall-mount kit or desktop stand you want to attach.
Place a protective cloth or 
cushion on a flat surface. Next, 
place the product with the face 
down on top of the cloth or 
cushion. Unfasten the screw from the 
back of the product.
Lift and detach the stand.
Installing a Wall-mount Kit or Desktop Stand
 Attach the wall-mount kit or desktop stand here
 Bracket (sold separately)
1
A
2
B
34
A
B
 
						

							28
Preparations
1
1 Preparations
 Notes
Using a screw longer than the standard length can damage the internal components of the 
product.
The length of screws required for a wall mount that does not comply with the VESA standards may 
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit 
or desktop stand using excessive force. The product may get damaged or fall and cause personal 
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws 
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a wall-
mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm 
or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards. 
1.3.5 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape 
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft 
locking device for details. The lock device is sold separately.
 An anti-theft locking device can be purchased separately.
Refer to the user guide provided with y our anti-theft locking device for details.
Anti-theft locking devices can be purch ased at electronics retailers or online. 
To lock an anti-theft locking device: 
1Fix the cable of your anti-theft locking device to a heavy object 
such as a desk.
2Put one end of the cable through the loop on the other end.
3Insert the locking device into the anti-theft lock slot at the back of 
the product.
4Lock the locking device.
 
						

							29
Preparations
1
1 Preparations
1.4 "MagicRotation Auto"
The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor 
and rotates the Windows screen accordingly.
[Software Installation]
1Insert the user manual CD provided with the product into the CD-ROM drive.
2Follow the instructions given on the screen to proceed with installation.
 After installation, the on-screen display (OSD) menu will be displayed in the language of the operating 
system.
(This complies with the basic policies of Windows.)
 
[Caution]
1Compatible only with Windows 7 (32 bits or 64 bits) 
2Compatible with a graphics card that complies with the DDC/CI and MS API standards
With a graphics card that does not comply with the aforementioned standards, the "MagicRotation 
Auto" function may not be available.
3To maximize the performance of the function, update the graphics card driver to the latest version.
4Fourteen languages are available as installation languages.
5If the orientation is set to a mode other than "Landscape" in the screen resolution menu on Windows 
7, the "MagicRotation Auto" function may not work properly. 
6The OSD menu will be displayed if the monitor is rotated. When the monitor is rotated, the screen 
reconfiguration process may be displayed or screen burn-in may appear, depending on the graphics 
card. This is performed by the  Windows operating system and has no thing to do with the product.
7If you do not want the screen to rotate automatically when the monitor is rotated, press the Windows 
and L keys at the same time to lock the Window s operating system. If the operating system cannot 
be locked, it is due to the constraints of Windows API and has nothing to do with the product.
(QJOLVK)UDQoDLVHXWVFK0DJ\DU,WDOLDQR3ROVNL3RUWXJXrV


						

							302 Connecting and Using a Source Device
2 
Connecting and Using a Source Device
2.1 Before Connecting
2.1.1 Pre-connection Checkpoints
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.