Samsung Syncmaster S23a950d User Manual

							31
3D
2
2 3D
2.5 Precautions when Viewing 3D Video
zThe 3D effect may be experienced differently depending on the viewer. You may not notice the 3D 
effect at all if you have a prescription for one eye that is very different from the other eye.
zWhen viewing a 3D video under a fluorescent lamp or 3-wavelength lamp, you may notice a small 
amount of screen flickering.
zInterference may cause the 3D glasses to malfunction if there is any other 3D product or 
electromagnetic device (a microwave or a device that uses 2.4 Ghz-bandwidth frequency such as an 
Internet router) turned on nearby. If an unintended operation of the 3D glasses occurs, it is best to 
remove other electromagnetic devices or wireless communication devices nearby.
zVisually-sensitive viewers may notice a slight screen flickering when viewing bright images in 50Hz, 
3D video.
zRight after the monitor powers on, the left and right sides of 3D pictures may overlap more than 
usual. It may take a little time until the picture quality is optimized.
zIn some countries, strong flickering may be experienced from the 3D glasses depending on the 
ambient light intensity. To minimize flicker when viewing a 3D picture, dim the light or change the 
frequency on the PC to 50Hz or 100Hz.
 
						

							323 Connecting and Using a Source Device
3 
Connecting and Using a Source Device
3.1 Before Connecting
3.1.1 Pre-connection Checkpoints
zBefore connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
zDo not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
zCheck the types of ports at the back of the product you want to connect.
3.2 Connecting the Power
zConnect the power adapter to [DC 14V] on the rear of the product. Connect the power cord to the 
adapter and wall socket. (The input voltage is switched automatically.)
DC 14V
 
						

							33
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
3.3 Connecting and Using a PC
3.3.1 Connecting to a PC
zDo not connect the power cable before connecting all other cables.
zEnsure you connect a source device first before connecting the power cable.
zSelect a connection method suitable for your PC.
 Connecting parts may differ in different products. 
Connection Using the DVI Cable
1Connect the DVI cable to the DVI port on the back of the product and the DVI port on the PC.
2Connect the DC power adapter to the product and a power socket, and turn on the power switch 
on the PC.
 Audio is not available if the PC and product are connected via the DVI port. 
Connection Using an DVI-HDMI Cable
1Connect the DVI-HDMI cable to the DVI port on the back of the product and the HDMI port on the 
PC.
2Connect the DC power adapter to the product and a power socket, and turn on the power switch 
on the PC.
 Audio is not available if the PC and product are connected via the DVI port. 
DVI IN
HDMI DVI IN
 
						

							34
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
Connection Using an HDMI-DVI Cable
1Connect the HDMI-DVI cable to the HDMI port on the back of the product and the DVI port on the 
PC.
2Connect the DC power adapter to the product and a power socket, and turn on the power switch 
on the PC.
 Audio is not available if the PC and product are connected via the HDMI-DVI port. 
Connection Using an HDMI Cable (Digital Type)
1Connect the HDMI cable to the HDMI port on the ba ck of the product and the HDMI port on the PC.
2Connect the DC power adapter to the product and a power socket, and turn on the power switch 
on the PC.
 Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to 
hear audio.
 
HDMI IN
HDMI IN 
 
						

							35
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
Connection Using an DP Cable (Digital Type)
1Connect the DP cable to the DP port on the back of the product and the DP port on the PC.
2Connect the DC power adapter to the product and a power socket, and turn on the power switch 
on the PC.
 Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to 
hear audio.
 
3.3.2 Driver Installation
 zYou can set the optimum resolution and frequency for this product by installing the corresponding 
drivers for this product.
zAn installation driver is contained on the CD supplied with the product.
zIf the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and 
download the file.
 
1Insert the user manual CD provided with the product into the CD-ROM drive.
2Click "Windows Driver".
3Follow the instructions given on the screen to proceed with installation.
4Select your product model from the list of models.
5Go to Display Properties and check that the resolution and refresh rate are appropriate.
Refer to your Windows OS manual for further details.
DISPLAYPORT IN
 
						

							36
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
3.3.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the 
first time after purchase.
Select a language and change the resolution to the optimum value.
1Press [ ] to move to the language you want and press the [ ].
2To hide the information message, press [ ].
 zIf the optimum resolution is not selected, the message will appear up to three times for a specified 
time even when the product is turned off and on again.
zThe optimum resolution (1920 x 1080) can also be selected in  Control Panel on your PC. 
The optimal resolution for this monitor is as follows:
 1920 x 1080  60HzFollow the above settings to get the resolution.
English
Language Enter
m 
 
						

							37
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
3.3.4 Changing the Resolution Using a PC
 zAdjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture 
quality.
zThe picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. 
Changing the Resolution on Windows XP
Go to Control Panel   Display  Settings  and change the resolution.
Changing the Resolution on Windows Vista
Go to Control Panel   Personalization  Display Settings  and change the resolution.
ª
ª

12 3
********
**********
ª
ª

12
34
 
						

							38
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to 
Control Panel   Display  Screen Resolution  and change the resolution.
ª
ª

12
34
 
						

							39
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
3.4 Connecting to a Video Device
zDo not connect the power cable before connecting all other cables.
zEnsure you connect a source device first before connecting the power cable.
zThe product can be connected to a video device.
 Connecting parts may differ in different products. 
3.4.1 Connection Using the HDMI Cable
1Connect an HDMI cable to the HDMI ports on the product and video device.
2Press [ ] to change the input source to HDMI.
 Be sure to connect an audio output device such as headphones or speakers to [ ] on the 
product to hear audio.
 
3.5 Connecting Headphones
zConnect an audio output device such as headphones or speakers to [ ] on the product. 
HDMI IN 
HEADPHONE 
 
						

							404 Screen Setup
4 
Screen Setup
Configure the screen settings such as brightness and color tone.
4.1 MAGIC
This feature provides the viewing angle, brightness, and tint to suit your preferences.
4.1.1 SAMSUNG MAGIC Angle
Angle allows you to configure the settings to obtain the optimum picture quality according to your 
viewing angle.
You can enjoy similar picture quality to when you view directly in front of the product by selecting a 
viewing mode appropriate for each viewing angle.
 zThis menu is not available when  Bright is in Cinema  or Dynamic Contrast  mode.
zThis menu is not available when  Color is enabled. 
Configuring Angle
1Press [ ] on the product.
2Press [ ] to move to  Picture and press [ ] on the product.
3Press [ ] to move to  MAGIC and press [ ] on the product.
4Press [ ] to move to  Angle and press [ ] on the product. The following screen will 
appear. 
zOff   : Select this option to view directly in front of the product.
zLean Back Mode 1   : Select this option to view from a place slightly lower than the product.
m 
ReturnEnterMove
Off
Lean Back Mode 1
Lean Back Mode 2
Standing Mode 
Side Mode
Group View
Custom 
MAGICSAMSUNGMAGIC

Angle
SAMSUNGMAGICBright
SAMSUNGMAGICColor
155
4
2
3
1
Ý
Þ