Samsung Syncmaster P2470h User Manual

Using the Product3-5
Setting Up Anynet+
 Press the [TOOLS] button to display the Tools menu. You can also display the  menu by selecting  → 

Setup
• 
To use the  Function,  must be set to On. 
 When the function is disabled, all the< Anynet+> related operations are deactivated. 
 
• 
Setting an  Device to turn Off automatically when the TV is turned off.
 The active source on the TV remote must be set to TV to use the  function. 
If you set Auto Turn Off to Yes, connected external devices are also...

3-5Using the Product
3. Press the   or   button to select a particular device and press the [ ] button. It is switched to the selected device. 
 -  must be set to On in the  menu for the  menu to appear.
 Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching 
operation. 
The time required to scan for devices is determined by the number of connected devices. 
When the device scan is complete, the number of devices found are not displayed....

Using the Product3-5
MENUDESCRIPTION
Self Diagnosis   • 
If you think you have a picture problem, perform the picture test. Check the color pattern on the 
screen to see if the problem still exists.
•  : If the test pattern does not appear or there is noise in the test pattern, select . 
There may be a problem with the TV. Contact Samsung‘s call centre for assistance.
•  : If the test pattern is properly displayed, select . There may be a problem with your 
external equipment. Please check your...

3-5Using the Product
HD Connection Guide This menu presents the connection method that provides the optimal quality for the HDTV. Refer to 
this information when connecting external devices to the TV.
Contact Samsung View this information when your TV does not work properly or when you want to upgrade the soft-
ware. You can view the information regarding the call center, product and software file download 
method.
MENUDESCRIPTION
 

Using the Product3-6
3-6 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics 
website (www.samsung.com), and download the driver.
 
1.Insert the driver installation CD into the CD-ROM drive.
2.Click on Windows Driver.
3.Select the model of your product from the model list....

3-7Using the Product
3-7 Standard Signal Mode Table
 An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent 
characteristics of the panel, unlike a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting 
the resolution to the optimal resolution of the product.
 
PC Timing (D-Sub, DVI and HDMI input)
If the signal from the PC is one of the following...

Using the Product3-7
AV Timing (HDMI and Component input)
MODEL NAMERESOLUTION
HORIZONTAL 
FREQUENCY 
(KHZ)VERTICAL 
FREQUENCY  
(HZ)CLOCK 
FREQUENCY
(MHZ)
POLARITY (H/V)
P2470HD / 
P2770HDIBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500...

3-7Using the Product
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical frequency...

Installing the Software4-1
4 Installing the Software
4-1 Natural Color
What is Natural Color ?
This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely 
match the colors of printed pictures. For more information, refer to the online help of the software (F1).
Natural Color is provided online. You can download it from the website below and install;...

4-2Installing the Software
4-2 MultiScreen
What is MultiScreen ?
MultiScreen enables you to partition multiple sections on the Monitor.
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the MultiScreen setup program.
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MultiScreen setup file on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4.Complete the remaining software installation...