Samsung Syncmaster P2370 User Manual

							Installing the Product2-6
2-6 Using it as a TV
You may view television programs on the monitor if it is connected to an antenna or cable/satellite system without installing any 
separate TV reception hardware or software on your computer.
1.Connect the cable/satellite or TV antenna cable to the [ANT IN] port on the rear side of the monitor. 
• When using an indoor antenna/cable/satellite terminal:
Check the antenna terminal on the wall and then connect the antenna/cable/satellite TV cable.
• When using an outdoor antenna:
When using an outdoor antenna, we strongly suggest using a qualified technician to install it.
2.When the connections are completed, connect the TV power.
3.When the product is turned on for the first time after it was purchased, the initial setup operations () begin. 
 
Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal [ANT IN]. 
 
						

							2-7Installing the Product
2-7 Connecting an HDMI cable
Connect the HDMI OUT port of the AV device (Blu-Ray/DVD/Cable/Satellite box) to the [HDMI IN] terminal of the monitor using 
the HDMI cable. 
Press the [SOURCE] button at the front of the monitor or on the remote control to select  mode.
 You do not need to make a separate audio connection when connecting via HDMI. 
 
						

							Installing the Product2-8
2-8 Connecting Using a DVI to HDMI Cable 
1. Connect the DVI output terminal of an external device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable. 
2. Connect the red and white plugs of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital 
output device, and connect the opposite plug to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product.
Press the [SOURCE] button at the front of the monitor or on the remote control to select  mode.
 
						

							2-9Installing the Product
2-9 Connecting a Component cable 
1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [PR, PB, Y]] input ports 
using a component video cable [P
R, PB,Y].
2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [R-AUDIO-L]] port of the 
monitor.
Press the [SOURCE] button at the front of the monitor or on the remote control to select the  mode.
 For an explanation of Component video, consult your DVD/VCR/Cable/Satellite box manual. 
 
						

							Installing the Product2-10
2-10 Connecting a Scart cable
1.Connect the EXT(RGB) port of the monitor to the DVD Player using a SCART jack.
2.When a Scart device is connected to your monitor, the Source automatically changes to EXT.
 • Connect to the DVD Devices input if the device has a [EXT [RGB]] jack. 
• You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on.
 
 
						

							2-11Installing the Product
2-11 Connecting COMMON INTERFACE
1.Insert the CI CARD into the CAM in the direction of the arrow until it fits.
2.Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
3.Check if you can see a picture on a scrambled signal channel.
 • When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
• The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in 
about 2~3 minutes. If an error message is displayed, please contact your service provider.
• When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating 
that the channel list is now updated.
• You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with 
your hands since dropping the CI CARD may cause damage to it.
• Insert the CI-Card in the direction marked on it.
• CAM is not supported in some countries and regions, check with your authorized dealer.
 
 
						

							Installing the Product2-12
2-12 Connecting to an Amplifier
Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical 
cable.
 • If no sound is emitted from the monitor, you need to use an amplifier.
• For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their 
manufacturers.
 
 
						

							2-13Installing the Product
2-13 Connecting Headphones
 Connect your headphones to the Headphone connection terminal.
2-14 Kensington Lock 
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device. You have to purchase the locking device separately.
Locking the product
1.Insert the locking part of the locking device into the hole of the Kensington lock of the product (  ) and turn it in the locking 
direction ( ).
2.Connect the Kensington lock cable.
3.Tie the Kensington lock cable to a desk or heavy object.
 You can purchase the locking device from an electronics store or an online shop. 
 
						

							Using the Product3-1
3 Using the Product
3-1 Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.Press the [POWER ] button on the remote control.
 • You can also use the [ ] button on the TV.
• The message . is displayed.
 
2.Press the [ ] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [ ] button to confirm your 
choice.
3.Press the ◄ or ► button to select  or , then the [ ] button.
 • We recommend setting the TV to  mode for the best picture in your home environment.
•  mode is only intended for use in retail environments. If the unit is accidentally set to  
mode and you want to return to  (Standard): Press the volume button on the TV. When the volume 
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
 
4.Press the   button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [ ] button to confirm your 
choice.
5.Press the ▲ or ▼ button to select  or , then press the [ ] button.
 • :  antenna signal. / :  antenna signal. 
• In Cable mode, you can select the correct signal source among , , and  by pressing the ▲, ▼, 
◄ or ► button, then press the [ ] button. If you have Digital cable, select the cable system signal source for both 
Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your 
particular area.
 
6.Press the ▲ or ▼ button to select the channel source to memorize. Press the [ ] button to select .
 • When setting the antenna source to , a step appears allowing you to set a value for the digital channel 
search. For more information, refer to  → .
• : Digital and Analogue channels.
• : Digital and Analogue channels.
• : Analogue channels.
• The channel search will start and end automatically.
• Press the [ ] button at any time to interrupt the memorization process.
• After all the available channels are stored, the message Set the  is displayed.
 
7.Press the [ ] button.
Press the ▲ or ▼ button to select , then Press the [ ] button. 
 • If you select ,  is displayed.
• If you have received a digital signal, the time will be set automatically. If not, select  to set the clock.
 
 
						

							3-1Using the Product
8.The description for the connection method providing the best HD screen quality is displayed. Check the description and press 
the [ ] button.
9.The message  is displayed. When you have finished, press the [ ] button.
If you want to reset this feature...
1.Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select , then press the [ ] button.
2.Press the [ ] button again to select .
 The  feature is only available in the TV mode.