Samsung Syncmaster P2370 User Manual

Using the Product3-2
3-2 Viewinig the Control panel
 Touch one of the operating buttons lightly.
The LED buttons appear.
 
ICONDESCRIPTION
[] Use this button to select a function. 
Signals other than the TV signal can only be selected if the corresponding device is 
connected. 
The order in which the TV/external input signal changes.
 →  →  →  →  →  
[MENU]Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu.
[ -/+ ] Moves...

3-3Using the Product
3-3 Remote Control
 The performance of the remote control may be affected by a TV or other electronic device operating near the product, 
causing a malfunction due to interference with the frequency.
 
 POWER
Turns the product On/Off.TV
Selects the TV mode directly.
Number Buttons
Press to change the channel.PRE-CH
This button is used to return to 
the immediately previous chan-
nel.
Activates a highlighted menu item.
 MUTE
Adjusts the audio volume.
+  -
Press to increase or decrease...

Using the Product3-3
Installing Batteries in the Remote Control 
1.Lift the cover at the back of the remote control upward as shown in the figure.
2.Install two AAA size batteries.
 Make sure to match the +and - ends of the batteries with the diagram inside the compartment. 
3.Close the cover.
 Remove the batteries and store them in a cool, dry place if you won‘t be using the remote control for a long time.
If the remote control doesn‘t work, check the following :
• Is the TV power on?
• Are the plus and...

3-4Using the Product
3-4 Teletext Feature
Most television stations provide written information services via Teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the 
remote control buttons.
 For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing 
or some pages may not be displayed.
You can change teletext pages by...

Using the Product3-4
 (exit)
Exit from the teletext display.(page up)
Used to display the next teletext 
page.
(index)
Used to display the index (contents) 
page at any time while you are 
viewing teletext.(page down)
Used to display the previous tele-
text page.
(store)
Used to store the teletext pages.(mode)
Press to select the teletext mode 
(LIST/FLOF). If you press it in the 
LIST mode, it switches into the 
List save mode. In the List save 
mode, you can save teletext 
page into list using the...

3-5Using the Product
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Available Modes
The icons below represent the input signals that are displayed when selecting an item in the Source List.
TOP MENUSSUB MENUS
Picture
[PC / DVI]MagicBright Contrast Brightness Sharpness Screen
Auto Adjustment Picture Options Picture Reset
Picture
[TV / Ext. / Component / 
HDMI]Mode Backlight Contrast  Brightness Sharpness
Colour Tint (G/R)...

Using the Product3-5
Picture [PC / DVI ]
 The default setting may be different depending on the selected Input Mode (input signal source selected in External Input 
List) and the selected resolution
 
MENUDESCRIPTION
MagicBright   is a feature providing an optimum viewing environment depending on the contents of 
the image you are watching. Currently five different modes are available: , , 
,  and . Each mode has its own pre-configured brightness 
value. 
•
 High Brightness
 For watching motion pictures...

3-5Using the Product
Picture [ TV / Ext. / Component / HDMI ] 
Screen • 
Removes noise such as vertical stripes.
 adjustment may move the screen image area. You may relocate it to the center using 
the horizontal control menu
•
Removes noise such as horizontal stripes.
If the noise persists even after  tuning, repeat it after adjusting the frequency (Coarse).
• 
Adjusts the screen location horizontally and vertically.
• 
Image parameters are replaced with the factory default values.
 Available in  Mode...

Using the Product3-5
MENUDESCRIPTION
Mode You can select the type of picture which best corresponds to your viewing requirements.
You can activate either , , or .
• 
Selects the picture for high-definition in a bright room.
• 
Selects the picture for optimum display in a normal environment.
•
Selects the picture for viewing movies in a dark room.
 Press the [TOOLS] button to display the Tools menu. You can also set the picture mode by 
selecting  → .
Backlight / Contrast / 
Brightness / Sharp-
ness /...

3-5Using the Product
Picture Options • 
The tone of the color can be changed.
•  -  -  - 
 •  or  is only activated when the picture mode is .
• Settings can be adjusted and stored for each external device you have connected to an 
input of the TV.
 
• 
 You can switch the Size.
•  - Automatically adjusts the picture size to the 16:9 aspect ratio. 
•  - Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. 
•  - Magnify the size of the picture more than 4:3. 
•  - Magnifies the 16:9...