Samsung Syncmaster P2070 User Manual

Environment
The location and the position of the monitor may influence the quality a\
nd other features of
the monitor.
If there are any sub woofer speakers near the monitor, unplug and reloca\
te the woofer to
another room.
Remove all electronic devices such as radios, fans, clocks and telephone\
s that are within 3
feet (one meter) of the monitor.
Useful Tips A monitor recreates visual signals received from the computer. Therefore\
, if there is a problem
with the computer or the video card, this can...

If the initial screen (the login screen) does not appear, contact the Service Center or
your dealer.
Q: Can you see  Not Optimum Mode, Recommended Mode 1920 x 1080 60 Hz on
the screen?
A: You can see this message when the signal from the video card exceeds the\
 maximum
resolution and frequency that the monitor can handle properly.
A: Adjust the maximum resolution and frequency that the monitor can handle \
properly.
A: If the display exceeds SXGA or 75 Hz, a Not Optimum Mode
, Recommended
Mode 1920 x...

The screen suddenly has become unbalanced.
Q: Have you changed the video card or the driver?
A:Adjust screen image position and size using the OSD.
Q:
Have you adjusted the resolution or frequency to the monitor?
A: Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).
Q: The screen can be unbalanced due to the cycle of the video card signals.\
 Readjust
Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted. Q: Have you adjusted the...

Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to t\
he computer.
Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)\
If you installed a new video card or if you assembled the PC, check if t\
he installed the adapter
(video) driver and the monitor driver.
Check if the scanning ratio of the video screen is set to between 56 Hz \
~ 75 Hz.
(Do...

Q: How can I clean the outer case/LCD Panel?
A:
Disconnect the power cord and then clean the monitor with a soft cloth, \
using either a
cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any wate\
r enter the
monitor.  Note
Before calling for assistance, check the information in this section to \
see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer ....

Specifications
General
General
Model Name SyncMaster P2070, P2070G
LCD Panel
Size
20 inch (49 cm)
Display area 422.8 mm (H) x 249.08 mm (V)
Pixel Pitch
0.2768 mm (H) x 0.2768 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical
56 ~ 60 Hz
Display Color 16.7 M
Resolution
Optimum resolution
1600x900@60Hz
Maximum resolution 1600x900@60Hz
Input Signal, Terminated
DVI(Digital Visual Interface)- I
0.7 Vp-p ±5 %
Separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)
Maximum Pixel Clock...

Environmental considerations
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The \
interac-
tion of the monitor and the computer systems will provide the best opera\
ting
conditions and monitor settings. In most cases, the monitor installation\
 will proceed
automatically, unless the user wishes to select alternate settings.
Dot...

Preset Timing Modes
If the signal transferred from the computer is the same as the following\
 Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differ\
s, the screen may go
blank while the power LED is on. Refer to the video card manual and adju\
sts the screen as
follows.
Display Mode Horizontal
Frequency (kHz) Vertical Fre-
quency (Hz) Pixel Clock
(MHz) Sync Polarity
(H/V) VESA, 640 X 480 31.469 59.940 25.175 -/-
VESA, 800 X 600 35.156 56.250 36.000 +/+
VESA, 800 X...

Resolution
Maximum resolution
1920x1080@60Hz
Input Signal, Terminated
DVI(Digital Visual Interface)- I
0.7 Vp-p ±5 %
Separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V)
Maximum Pixel Clock
164MHz (Analog,Digital)
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
Signal Cable
29pin DVI-A to D-sub cable, Detachable
24pin DVI-D to DVI-D cable, Detachable(Sold separately)
Dimensions (W x H x D) / Weight (Simple Stand)
536.3 x 345.2 x 49.6 mm / 21.1 x 13.6 x 2.0 inch (Without...

 Note
Design and specifications are subject to change without prior notice.  Class B Equipment (Information Communication equipment for residential\
 use)
This product complies with the Electromagnetic Compatibility Directives \
for residential use
and can be used in all areas including common residential areas. (Class\
 B equipment emits
less electromagnetic waves than Class A equipment.)
PowerSaver This monitor has a built-in power management system called PowerSaver. T\
his system saves
energy by...