Samsung Syncmaster P2070 User Manual

Sold separately
 
 
DVI Cable   
Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the res\
olution of your PC before
reaching the maximum count.  Note
The resolution displayed on the screen is the optimal resolution for thi\
s product.
Adjust your PC resolution so that it is the same as the optimal...

Front
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu. Customized Key[ ]
You can customize key assignment for the Custom button according to
your preferences.  Note
You can configure the customized key for a required function via  Setup >
Customized Key. Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness. Adjust buttons [ ]
These buttons allow you to adjust items in the menu. [ ]...

AUTO button
Use this button for auto adjustment.
Power button [ ]
Use this button for turning the product on and off.
Power Indicator
This light is lit when operating normally, and blinks once when your ad-\
justments are saved.  Note
See PowerSaver  described in the manual for further information regarding
power saving functions. For energy conservation, turn your monitor OFF
when it is not needed or when leaving it unattended for long periods.
Rear  Note
The configuration at the back of the product...

Connect the DVI-A to D-Sub Cable to the
DVI-I port on the back of your monitor.
Kensington Lock
The Kensington Lock is a device used to
physically fix the system when using it in a
public place. The locking device has to be
purchased separately. The appearance and
locking method may differ from the illustra-
tion depending on the manufacturer. Refer to
the manual provided with the Kensington
Lock for proper use. The locking device has
to be purchased separately.  Note
The location of the Kensington Lock...

Connections
Connecting Cables
 Connect the DC adapter for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet.  Use a connection appropriate for your computer.
 Using the D-sub (Analog) connector on the video card.
• Connect the DVI-A to D-Sub Cable to the DVI-I port on the back of your\
 monitor.  Monitor [DVI IN]   PC [D-sub]
 Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the DVI-A to D-Sub\
 connection...

Monitor and Bottom
Folding the base  Note
You can tilt the monitor screen forward to adjust the angle to a particu\
lar angle. Connections 

Using the Software
Monitor Driver
 Note
When prompted by the operating system for the monitor driver, insert the\
 CD-
ROM included with this monitor. Driver installation is slightly differen\
t from one
operating system to another. Follow the directions appropriate for the o\
per-
ating system you have.
Prepare a blank disk and download the driver program file at the Interne\
t web
site shown here.
Internet web site :
http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic)
1....

 Note
This monitor driver is under certifying MS logo, and this installation d\
oesnt damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
Installing the Monitor Driver (Manual) Microsoft®
 Windows Vista™‚ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2. Click  (Start) and Control Panel. Then, double-click on Appearance and Perso\
nal-
ization. 3. Click Personalization and then Display Settings.
4. Click Advanced Settings.......

If the message Windows needs... is displayed, as shown in the figure b\
elow, click
Continue.
 Note
This monitor driver is under certifying MS logo, and this installation d\
oesnt damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click Update Driver... in the Driver tab. 7.
Check the Browse my computer for driver software checkbox and click L\
et me pick
from a list of device drivers on my computer. 8. Click Have Disk...” and select the folder (for example,...

9.
Select the model that matches your monitor from the list of monitor mode\
ls on the screen,
and click Next.  
10. Click Close  → Close → OK → OK on the following screens displayed in sequence. Microsoft
®
 Windows ®
 XP Operating System Using the Software