Samsung Syncmaster Fx2490hd User Manual

Using the Product3-5
Settings
Using the Settings Menu
MENUDESCRIPTION
Continuous Movie 
Play HelpSelect to display the help pop-up message for continuous movie playback.
•  - 
Get DivX® VOD regis-
tration codeShows the registration code authorized for the TV. If
 you connect to the DivX web site and register 
the registration code with a personal account, you  can download VOD registration file. If you play 
the VOD registration using , the registration is completed.
 For more information on DivX® VOD,...

3-6Using the Product
3-6 Anynet+ (HDMI-CEC)
What is Anynet+?
 is a function that enables you to control all connected Samsung devices that support  with your Samsung 
TV‘s remote. The  system can be us ed only with Samsung devices that have the  feature. To be sure your 
Samsung device has this feature, check if there is an  logo on it.
Connecting Anynet+ Devices
1. Connect the [HDMI (DVI) IN  1, 2] jack on the TV and the HDMI OUT jack of  the corresponding  device using an 
HDMI cable.
2. Connect the...

Using the Product3-6
 Menu
The  menu changes depending on the type and status of the Anynet+ devices connected to the TV.
If more than one recording device is connected, they are disp layed as (*recorder) and if only one recording device is 
connected, it will be represented as (*device_name).
Setting Up Anynet+
 Press the [TOOLS] button to display the Tools menu. You  can also display the  menu by selecting   → 
.
 MENUDESCRIPTION
View TV Changes  mode to TV broadcast mode.
Device List Shows the Anynet+...

3-6Using the Product
MENUDESCRIPTION
Device List
1. Press the [TOOLS] button. Press the [ ]  button to select .
2. Press the   or   button to select  , then press the [ ] button.
 -  devices connected to the TV are listed.
 - If you cannot find a device you want, press the red button to scan for devices.
3. Press the   or   button to select a particular  device and press the [ ] button. It is switched to the 
selected device. 
 -  must be set to  in the  menu for the  
menu to appear.
 Switching to the...

Using the Product3-7
3-7 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics 
website (www.samsung.com),  and download the driver.
 
1.Insert the driver installation CD into the CD-ROM drive.
2. Click on Windows Driver.
3. Complete the remaining installation steps according to...

3-8Using the Product
3-8 Standard Signal Mode Table
 This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution 
setting is dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setti ng 
the resolution to the optimal resolution of the product.
 
PC Timing (PC and HDMI input)
If the signal from the PC is one of the following standard signal  modes,...

Installing the Software4-1
4 Installing the Software
4-1 Natural Color
What is Natural Color ?
This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely 
match the colors of printed pictures. For more inform ation, refer to the online help of the software (F1).
Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresou...

4-2Installing the Software
4-2 MultiScreen
What is MultiScreen ?
MultiScreen enables you to partition multiple sections on the product.
Installing the Software
1.Insert the installation CD  into the CD-ROM drive. 
2. Select the MultiScreen setup program.
 If the pop-up screen for the software installation does no t appear on the main screen, find and double-click the 
MultiScreen setup file  on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4. Complete the remaining software...

Troubleshooting5-1
5 Troubleshooting
5-1 Product Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform  the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2. Remove the D-Sub cable from the product. 
3. Turn the product on. 
4. If the product is working properly, the   message appears.
In...

5-2Troubleshooting
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
PROBLEMS RELATED TO INSTALLATION (PC MODE)
The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely 
connected and tightened.
(Refer to Connecting to a Computer) 
Blank spaces are found at the top and bottom of 
the screen when an HDMI or HDMI-DVI cable...