Samsung Syncmaster Fx2490hd User Manual

Major Safety Precautions1-3
Be careful that adaptor should not be in contact 
with water and therefore not be wet. 
• This may cause a malfunction, electric 
shock or fire. Do not use adaptor by the 
waterside or outside particularly when it 
rains or snows. Be  careful that adaptor 
should not be wet while cleaning floor with 
water.Watching the product from too close a dis-
tance continuously may damage your eye-
sight.
Avoid using a humidifier or cooker near the 
product.
• Otherwise, it may result in...

1-3Major Safety Precautions
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm (18~19 inches) fr om your eyes to the screen. Look down at 
the screen and face the screen forwards.
• Adjust the angle of the product so t hat light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place...

Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the product at a later stage.
• If any items are missing, contact your dealer. 
• Contact a local dealer to purchase optional items.
 
 • The color and the appearance may differ depending on the product, and the specifications are subject to change without 
prior notice to improve the performance. 
•...

2-2Installing the Product
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
 The color and the appearance may differ depending on the product, and the specifications are subject to change without 
prior notice to improve the performance.
 
Place a soft cloth over the table to prot ect the product and place the product onto the 
cloth face down.
Insert the stand base into the stand as shown in the figure....

Installing the Product2-3
2-3 Removing the Stand
 Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. 
 The color and the appearance may differ depending on the product, and the specifications are subject to change without 
prior notice to improve the performance.
 
Place a soft cloth over the table to protec t the product and place the product face down.
Remove the screws from the bottom of the stand.
Pull the stand from the stand base to...

2-4Installing the Product
2-4 Connecting to a Computer
 The connecting part may differ depending on the product model. 
1. Connect the product to a PC depending on the video output supported by the PC.
When the graphics card provides a D-Sub 
() output
•
Connect the [PC IN] port of the product to the D-Sub port of the PC with the D-Sub cable. 
When the graphics card provides a DVI () output
• Connect the [HDMI  (DVI) IN] port of the product to the DVI port of the PC with the HDMI to DVI cable.
When the...

Installing the Product2-4
 When a PC with a resolution of 1920 x 1080 @ 60 Hz is connected to the [HDMI (DVI) IN] port, you should set the  
mode to  in the  of the  mode. In this case, a separate sound connection is required. 
 
2. Connect the [PC/DVI AUDIO IN] port on the rear  side of the product to the sound card of the PC.
3. Connect the power adapter to [DC14V] on the rear of the product. Connect the power cord to the adapter and wall socket.
(The input voltage is switched automatically.)
 

2-4Installing the Product
 • You may enjoy clear and quality sound from the computer sound card using the products speakers. (You dont need to 
install separate speakers for your computer.)
 
 

Installing the Product2-5
2-5 Using it as a TV
You may view television programs on the product if it is connected to an antenna or cable system wi thout installing any separate 
TV reception hardware or software on your computer.
1. Connect the cable or TV antenna cable to the [A NT IN] port on the rear side of the product. 
• When using an indoor antenna/cable terminal: Check the antenna terminal on the wall and then  connect the antenna/cable/satellite TV cable.
• When using an outdoor antenna: When...

2-6Installing the Product
2-6 Connecting an HDMI cable
1.Connect the HDMI OUT port of the AV device  (Blu-ray/DVD/Cable/Satellite box) to the [HDMI (DVI) IN] terminal of the product 
using the HDMI cable. 
2. Press the [SOURCE] button at the front  of the product or on the remote control to select  mode.
 You do not need to make a separate audio connection when connecting via HDMI.