Samsung Syncmaster Ex1920 User Manual

							Using the product3-46
 SETUP&RESET
MenuDescription
ResetUse this function to restore the visual quality and color settings to the factory defaults.
•  - 
LanguageSelect a language for the OSD.
 The selected language is only applied to the product OSD. This setting does not affect the other 
functions of the PC.
 
MagicReturnOnly works in Windows 7 and recommended when using multiple monitors.
• 
Whenis selected, thefunction is turned off.
•
Whenis selected, thefunction is turned on.
 • The function is available in Windows 7 only.When use the other OS,it is recommended to 
set this function to .
• This function is not available for analog signal input.
• This function is not available when  is set to .
• This function may be unavailable for some graphics cards. These graphics cards dont 
support the international EDID standard.(DDWG DVI Standard) It is recommended to set 
this function to .
• Press and hold down the ▼ key for 5 seconds while the  OSD is 
displayed, will be automatically set to .
 
MagicEcoThis function provides user a low power mode which is realized by lowering the current of the display 
panel.
• 
When  is selected, the power consumption is 100% of default setting.
• 
When  is selected, the power consumption is about 75% of default setting.
• 
When  is selected, the power consumption is about 50% of default setting.
• 
When  is selected, the function is turned Off .
 This menu is unavailable when  is set to  mode. 
Off Timer On/OffYou can turn the Off Timer on or off.
•  - 
 
						

							Using the product3-46
 INFORMATION
Off Timer SettingTurns the power off automatically when the configured time is reached. When  of  is selected,This function is available only.  
Key Repeat TimeControls the repeat delay of a button.
You can set to ,  or . If  is selected, the button only 
responds once.
Customized KeyYou can set the function of the Customized Key to one of the following.
• PC signals :  -  -  - 
• AV signals :  -  -  - 
Auto Source•  - The monitor automatically selects an input signal.
•  - Users have to manually select an input signal. Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models. 
PC/AV ModeSet to PC when connected to a PC.
Set to AV when connected to an AV device. • This function does not support Analog mode.
• Supplied for the wide models only such as 16:9 or 16:10.
 
Display TimeThe OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
•  -  -  - 
Menu TransparencyYou can select the transparency of the OSD.
•  - 
MenuDescription
INFORMATIONShows the frequency and resolution set on the PC.  For models with an Analog interface only,  is not shown in the 
.
 
MenuDescription
 
						

							Installing the Software4-1
4 Installing the Software
4-1 Natural Color
What is Natural Color ?
 
This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the 
colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).
 
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html 
 
						

							Installing the Software4-2
4-2 MagicTune
What is MagicTune?
 MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor 
functions and easy-to-understand guidelines. 
Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the MagicTune setup program. 
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MagicTune setup file on the CD-ROM.
 
3.Select the installation language and click [Next].
4.Complete the remaining software installation steps according to the instructions displayed on the screen.
 • The software may not work properly if you do not restart the computer after the installation.
• The MagicTune icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
 
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment. 
System Requirements
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista 32Bit 
• Windows 7 32Bit 
 For MagicTune™, Windows 2000 or later is recommended.  
Hardware
• At least 32MB of memory 
• At least 60MB of free space on the hard disk drive 
 For more information, refer to the website. 
Removing the Software
You can only remove MagicTune™through [Add or Remove Programs ] in Windows.
To remove MagicTune™, complete the following steps.
1.Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu. 
2.Double-click the [Add or Remove Programs] icon in the Control Panel. 
 
						

							Installing the Software4-2
3.In the [Add/Remove] window, find and select MagicTune™so that it is highlighted. 
4.Click [Change or Remove Programs] to remove the software. 
5.Select [Yes] to start removing MagicTune™. 
6.Wait until a message box appears informing you that the software has been removed completely. 
 For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, 
please visit our website. 
 
 
						

							Installing the Software4-3
4-3 MagicRotation
What is
MagicRotation?
The MagicRotation Software from Samsung Electronics, Inc. provides the user with a rotation feature (0, 90, 180, 270 orientation) 
that facilitates the optimum utilization of computer display screen, better viewing and improved user productivity. 
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the
MagicRotation setup program. 
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MagicRotation setup file on the CD-ROM.
 
3.Select the installation language and click [Next].
4.Complete the remaining software installation steps according to the instructions displayed on the screen.
 • The software may not work properly if you do not restart the computer after the installation.
• The MagicRotation icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
 
Restrictions and Problems with the Installation (MagicRotation)
The installation of MagicRotation
may be affected by the graphics card, motherboard and the networking environment. 
Limitation
1.The Display Driver should be properly loaded for the MagicRotation to work properly.
The installed Display Driver should be the latest driver supplied by the vendor. 
2.If some applications like Windows Media Player, Real Player, etc. are not displaying movie files properly in 90, 180 and 
270 orientations then do the following : 
• Close the application. 
• Select the Orientation (90, 180, 270) you want to view the application. 
• Relaunch the application. 
In most cases this should fix the problem. 
3.User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientation mode selected (90, 
180, 270).
e.g. 3D games 
4.DOS based applications in Full Screen Mode will not function as per the orientation mode selected (90, 180, 270). 
5.Dual is not supported in Windows™ 98, ME, NT 4.0. 
6.MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality). 
7.If you are changing your Graphic Card it is recommended that you uninstall the MagicRotation Software before doing so. 
System Requirements
OS
• Windows™ 98 SE
• Windows™ Me
• Windows™ NT 4.0
• Windows™ 2000
• Windows XP Home Edition
 
						

							Installing the Software4-3
• Windows XP Professional
• Windows Vista 32Bit 
• Windows 7 32Bit 
 For MagicRotation, Windows 2000 or later is recommended.  
Hardware
• At least 128MB of memory(recommended) 
• At least 25MB of free space on the hard disk drive 
Service Packs
• It is recommended that your System has the latest Service Pack installed. 
• For Windows™ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with Active Desktop component. 
 • For more information, refer to the website.
• Windows™ is registered trademark of Microsoft Corporation,Inc. 
 
Removing the Software
You can only remove MagicRotation through [Add or Remove Programs ] in Windows.
To remove MagicRotation, complete the following steps.
1.Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu. 
2.Double-click the [Add or Remove Programs] icon in the Control Panel. 
3.In the [Add/Remove] window, find and select MagicRotation so that it is highlighted. 
4.Click [Change or Remove Programs] to remove the software. 
5.Select [Yes] to start removing MagicRotation. 
6.Wait until a message box appears informing you that the software has been removed completely. 
 For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicRotation, 
please visit our website. 
 
 
						

							Installing the Software4-4
4-4 MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the MultiScreen setup program.
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MultiScreen setup file on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4.Complete the remaining software installation steps according to the instructions displayed on the screen.
 • The software may not work properly if you do not restart the computer after the installation.
• The MultiScreen icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
 
Restrictions and Problems with the Installation (MultiScreen)
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment. 
Operating System
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista 32Bit 
• Windows 7 32Bit 
 For MultiScreen, the operating systems Windows 2000 or later is recommended.  
Hardware
• At least 32MB of memory 
• At least 60MB of free space on the hard disk drive 
Removing the Software 
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. 
Select MultiScreen from the program list and click the [Add/Delete] button. 
 
						

							Troubleshooting5-1
5 Troubleshooting
5-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform 
the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2.Separate the signal cable from the product .
3.Turn the product on. 
4.If the product is working properly, the  message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product 
is working properly.
 
						

							Troubleshooting5-2
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A blank screen appears / I cannot turn the product on
Is the power cord connected properly? Check the connection status of the power cord.
Is the  message displayed on the 
screen?(Connected using the D-sub cable)
Check the cable connecting the PC and the product.
(Connected using the DVI cable)
If the message appears on the screen even if the cable is 
properly connected, recheck the input signal by pressing the [ 
 ] button of the product.
Is the  message displayed on the 
screen? This occurs when the signal from the graphics card exceeds 
the maximum resolution or the maximum frequency of the 
product.
In this case, set up the appropriate resolution and the fre-
quency for the product.
Is a blank screen displayed and does the power LED blink at 
a 1 second interval?1.This occurs when the power saving function is running.
If you click the mouse or press any key, the screen will be 
turned on.
2.This occurs when two monitors are connected, 
 is  and Magictune is running. In this 
case, characters on the Magictune OSD may appear 
corrupted. To run the Magictune, the  must 
be set to . Please restart your PC, set the 
 to  and run the Magictune.
Did you connect with a DVI cable? If you connect the DVI cable when the PC has booted up or if 
you reconnect the DVI cable after disconnecting the cable 
while using a PC, the screen may not be displayed because 
some graphics cards do not output the video signal.
In this case, reboot the PC while the DVI cable is connected.
Blank spaces are found at the top and bottom of the screen 
when an [HDMI] or [HDMI-DVI] cable is connected to the 
monitor and PC.Blank spaces on the screen are not caused by the monitor.
The cause of the problem is the PC or graphics card, and can 
be fixed by adjusting the screen size in the HDMI or DVI 
option of the graphics card settings menu.
If the graphics card settings menu has no option to adjust the 
screen size, update the graphics card driver to the latest ver-
sion.
(Please contact the graphics card or computer manufacturer 
for details on how to adjust the screen settings.)
THE IMAGE IS TOO LIGHT OR TOO DARK.
Adjust the  and .
(Refer to the , )
The display brightness can differ according to the mode set for .
 If  is set to , the display brightness can differ according to the input signal.
The on screen adjustment menu (OSD) does not appear.
Did you cancel the screen adjustment? Check if the  function is set to Off.