Samsung Syncmaster 961bf Quick Start Guide

							 
 
 
Menu Description
AUTO  When the AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.  
Auto adjustment allows the monitor to se
lf-adjust to the incoming Analog signal. 
The values of fine, coarse and position are adjusted automatically.  
(Available in Analog mode only)  
 
 
To make the automatic adjustment function sharper, execute the AUTO function 
while the  AUTO PATTERN  is on.  
 
If auto adjustment does not work properly, press AUTO button again to adjust 
picture with more accuracy.
If you change resolution in the control panel, auto function will be executed 
automatically. 
OSD Locked & Unlock
 
In case of pushing AUTO button after locking OSD
 
						

							 
 
 
 
 In case of pushing MENU button after locking OSD
Menu Description
OSD Locked &  Unlock This is the function that locks the OSD in
 order to keep the current states of 
settings or prevent others from adjusting the current settings.  
 
Locked : Hold down the menu button for more than five seconds to activate the 
OSD adjustment lock function. 
 
Unlock : Hold down the menu button for more than five seconds to deactivate 
the OSD adjustment lock function. 
 
Though the OSD adjustment lock function is activated, you can still adjust 
the brightness and contrast, and adjust MagicBright ( ) using the Direct 
button.
MagicBright™
 
						

							 
 
 
 
 
 
  
Menu Description
 
MagicBright™ Push the MagicBright™ button to circle through available preconfigured 
modes.  
 
- seven different modes (Custom/Text/Internet/Game/Sport/Movie/Dynamic 
Contrast) 
Brightness
 
Menu Description
 
Brightness When OSD is not on the screen, push the button to adjust brightness.
 
						

							 
 
 
 SOURCE 
Menu Description
SOURCE Selects the Video signal whil e the OSD is off. (Analog/Digital) 
 
 
OSD Function 
Picture Brightness  Contrast
Color MagicColor  Color Tone  Color Control  Gamma
Image Coarse  Fine  Sharpness  H-Position  V-Position
OSD Language  H-Position  V-Position  Transparency  Display Time
Setup Auto Source  Image Reset  Color Reset  RTA
Information
 
 
Picture : Not available in MagicBright mode of Dynamic Contrast. 
 
						

							 
 
 
 
 
Menu Description Play/Stop
Brightness You can use the on-screen menus to change the 
brightness according to personal preference.  
 
MENU →  →  →  ,  → MENU
Contrast You can use the on-screen menus to change the contrast 
according to personal preference.  
(
 Not available in MagicColor mode of Full and Intelligent.  ) 
 
 
MENU →  →  ,  →  →  ,  → MENU
Color : Not available in MagicBright mode of Dynamic Contrast. 
Menu Description Play/Stop
 
						

							 
 
 
 
MagicColor
 
MENU →  ,  →  →  →  ,  → MENU
MagicColor is a new technology that Samsung has exclusively 
developed to improve digital image and to display natural color 
more clearly without disturbing image quality.  
 
 
Off Returns to the original mode.
Demo The screen before applying MagicColor appears on the right and the screen after applying 
MagicColor appears on the left. 
Full Displays not only vivid natural color but also 
more realistic natural skin  color with clearness. 
Intelligent Displays vivid natural color with clearness. 
Color ToneThe tone of the color can be changed and one of four modes 
can be selected -Cool, Normal, Warm and Custom.  
(
 Not available in MagicColor mode of Full and Intelligent.  )  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Color Control Adjusts individual Red, Green, Blue color balance. -Red, Green, 
Blue  
(
 Not available in MagicColor mode of Full and Intelligent.  )  
 
MENU →  ,  →  →  ,  →  →  ,  →  →  ,  → MENU
Gamma Gamma correction changes the luminance of the colors with 
intermediate luminance.  
 
- Mode 1  
- Mode 2  
- Mode 3  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Image 
Menu Description Play/Stop
Coarse Removes noise such as vertical stripes.  
Coarse adjustment may move the screen image area. You 
may relocate it to the center using the horizontal control 
 
						

							 
 
 
 
menu.  
 
MENU →  ,  →  →  →  ,  → MENU
Fine
Removes noise such as horizontal stripes.  
If the noise persists even after fine tuning, repeat it after 
adjusting the frequency (clock speed).  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Sharpness
Changes the clearance of image.  
(
 Not available in MagicColor mode of Full and 
Intelligent.  )  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
H-Position Changes the horizontal position of the monitors entire 
display.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
V-PositionChanges the vertical position of the monitors entire 
display.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
OSD 
Menu Description Play/Stop
Language You can choose one of nine languages.  
  
 
 
MENU →  ,  →  →  →  ,  → MENU 
The language chosen affects only the language of the OSD. It 
has no effect on any software running on the computer.
H-Position You can change the horizontal position where the OSD menu 
appears on your monitor.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
 
						

							 
 
 
 
V-Position
You can change the vertical position where the OSD menu 
appears on your monitor.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Transparency
Change the transparency of the background of the OSD.  
 MENU →  ,  →  →  ,  →  →  ,  → MENU
Display TimeThe menu will be automatically turned off if no adjustments are 
made for a certain time period.  
You can set the amount of time the menu will wait before it is 
turned off.  
- 5 sec, 10 sec, 20 sec, 200 sec  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Setup 
Menu Description Play/Stop
Auto Source Select Auto Source for the monitor to automatically select the 
signal source.  
 
MENU →  ,  →  →  →  ,  → MENU
Image Reset 
Image parameters are replaced wi
th the factory default values.  
 MENU →  ,  →  →  ,  →  →  ,  → MENU
Color Reset Color parameters are replaced with the factory default values.  
 MENU →  ,  →  →  ,  →  →  ,  → MENU
RTARTA (Response Time Accelerator)  
A function that accelerates the response speed of the panel so 
as to provide a sharper and more natural video display.  
 
 
RTA On : Activates the RTA functi
on so that the panel operates 
at a higher response speed than its original speed.
RTA Off : Deactivates the RTA function so that the panel  operates at its original response speed.
 
						

							 
 
 
 
 
 
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
If you turn the power off and on again after switching RTA off, 
the RTA function is automatically 
switched On (Factory Setting)
Information 
Menu Description
Information Shows a video source, display mode on the OSD screen.  
 
MENU →  ,  
 
						

							 
 
 
Menu Description
Information Shows a video source, display mode on the OSD screen.  
 
MENU →  ,