Samsung Syncmaster 941mw Quick Start Guide

  
1-2. Connecting EXT.(RGB) - It only appli
es to AV DEVICE that supports SCART. 
Connect to the DVD Devices input if the device has a EXT (RGB) jack.  
You can watch DVD simply by hooking up the DVD player  with the monitor as long as the power is on. 
1. Connect the EXT (RGB) port of the monitor to the DV D Player using a SCART jack. 
 
2. Select Ext. by using the  SOURCE.  
 
2. Connecting TV 
You may view television programs on the monitor if  it is connected to an antenna or CATV cable without...

 
 
 
 
Is weak signal causing poor reception? 
     Purchase and install a signal  amplifier for better reception. 
 
3. Connecting DVD/DTV Set Top Box 
Connect to the DVD/DTVSet Top Box input if  the device has a DVD/DTV connector.  
You can watch Component simply by hooking up the Com ponent with the monitor as long as the power is 
on. 
1. Connect the port of the  DVD, VCR (DVD / DTV Set-Top Box) to the R-AUDIO-L port of the monitor. 
 
2. Connect the VIDEO OUT port of t he DVD / DTV Set-Top Box to...

 
  
This monitor supports various 
types of VESA-standard bases.  
You need to either fold or remove the base  in use in order to install a VESA base.  
 
 
 
 
1. Folding the base 
The monitor may be recli ned from 0 to 23 degrees.  
 
 
2. Attaching a base 
This monitor accepts a 100 mm X 100 mm VE SA-compliant mounting interface pad. 
A. Monitor  
 
B.  Mounting interface pad (Sold separately)  
 
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface...

Do not fasten the screws too tightly, as this may damage the product or cause the product to 
fall, leading to personal injury. 
Samsung is not liable for t hese kinds of accidents.  
!Samsung is not liable for product damage or pers onal injury when a non-VESA or non-specified 
wall mount is used or the  c onsumer fails to follow the produc t installation instructions.  
!To mount the monitor on a wall, you should purcha se the wall mounting kit that allows you to 
mount the monitor at least 10cm aw ay...

5. Monitor driver installation is completed.  
 
 
 
 Installing the monitor driver (Manual) 
Windows XP  | Windows 2000  | Windows ME  | Windows NT  | Linux    
 
 
When prompted by the operating system for th e monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is s lightly different from one operating system to 
another. Follow the directions appropr iate for the operating system you have.  
 
Prepare a blank disk and download the  driver program file at the Internet...

     
 
5. Click  Update Driver..  and select Install from a list or..  then click Next button.  
 
     
 
6. Select  Dont search ,I will..  then click Next and then click  Have disk.  
 
     
 
7. Click the  Browse button then choose A:(D:\Driver) and choos e your monitor model in the model list 
and click the  Next button.  
 
     
 
8. If you can see following message window, then click the  Continue Anyway button. Then click  OK 
button. 
 
 

  
 
This monitor driver is under cert ified MS logo,and this installation doesnt damage your system.The 
certified driver will be post ed on Samsung Monitor Homepage.  
http://www.samsung.com/ 
 
9. Click the  Close button then click  OK button continually. 
 
 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not  Found on your monitor, follow these steps.
1. Choose  OK button on the  Insert disk window....

If you can see the Digital Signature Not Found  window then click the Yesbutton. And click 
the  Finish  button then the  Close button. 
 
 
 
   Microsoft® Windows® Millennium Operating System
 
 
1. Click  Start , Setting  , Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click  Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the  Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a...

 
Input 
Available Mode 
 : PC / DVI : TV : Ext. : AV : S-Video : Component
The default setting may be different depending  on the selected Input Mode (input signal 
SOURCE selected in External Input  List) and the selected resolution.  
OSDDescriptionPlay / Stop
Source ListUse to select PC, TV, or other external input SOURCEs connected to the 
Monitor. 
Use to select the screen of your choice. 
- The direct button on the remote  control is the SOURCE button. 
1) PC
2) DVI
3) TV
4) Ext.
5) AV
6) S-Video...

 
PIPWhen external AV devices such as VCRs or DVDs are connected to the 
monitor, PIP allows you  to watch video from those devices in a small window 
super-imposed on the PC Video signal. (Off / On) 
- Available in PC / DVI Mode Only 
1) PIP  : Turn the PIP Screen on or off.  
 The direct button on the remote control is  PIP button.  
 Off / On  
2) SOURCE  : Select the input SO URCE for the PIP.  
 The direct button on the remote control is  SOURCE button. 
 PC / DVI  : TV / AV / S-Video 
3) Size :...