Samsung Syncmaster 941mw Quick Start Guide

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
   
    
 
  
Install Driver  
 
  
SyncMaster 941MW / 941MG
 

 
 
 Notational 
 
 
 
 
 
Failure to follow directions noted by this sym bol could result in bodily harm or damage to the 
equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Ground to prevent an electric shock 
 
 
 
 
 
  Power 
  When not used for extended period of time , set your computer to DPMS.  
If using a screen saver, set it  to active screen mode.  
 
The images here are for reference only , and are...

 Do not use a damaged or loose plug. 
!This may cause electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire  nor touch the plug with wet hands. 
!This may cause electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
!An improper ground may cause electr ic shock or equipment damage. 
(Class l Equipment only.)  
 
 
 
  Insert the power plug firmly so  that it does not come loose. 
!A bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug...

 
 
  Installation  
  Be sure to contact an authorized Service  Center, when installing your monitor in a 
location with heavy dust, high or low temper atures, high humidity, and exposed to 
chemical substances and where it operates  for 24 hours such as at airports, train 
stations etc. 
!Failure to do so may cause serious damage to your monitor.  
 
 
Place your monitor in a location with  low humidity and a minimum of dust. 
!Failure to do so may cause electric shock or fire inside the monitor....

!Any increase in the internal temperature may cause fire.  
 
 
Put down the monitor carefully. 
!Failing to do so may damage the monitor.  
 
 
Do not place the monitor face down. 
!This may damage the TFT-LCD surface.  
 
 
The installation of the bracket must  be done by a qualified professional. 
!Installing the bracket by unqualified personnel may result in injury.  !Always use the mounting device specified in the owners manual.  
 
 
When installing the product, make sure to keep it away from the...

 
  Clean  
  
When cleaning the monitor case or the surf ace of the TFT-LCD screen, wipe with a 
slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly onto the monitor. 
!This may cause damage, electric shock or fire.  
 
 
Use the recommended detergent with a smooth cloth.   
 
 
If the connector between the plug and the pi n is dusty or dirty, clean it properly 
using a dry cloth. 
!A dirty connector may cause  electric shock or fire.  
 
 
Make sure to unplug the power cord...

If your monitor does not operate normally - in particular, if there is any unusual 
sound or smell coming from the monitor  - unplug it immediately and contact an 
authorized dealer or the  Service Center.  
!This may cause electr ic shock or fire.  
 
 
Keep the product away from places exposed to oil, smoke or moisture; do \
not 
install inside a vehicle. 
!This may cause a malfunction,  electric shock or fire.  !In particular, avoid operating the moni tor near water or outdoors where the 
monitor...

Never insert anything metallic into the monitor openings.  
!This may cause electric shock, fire or injury.  
 
 
Do not insert metal objects such as chops ticks, wire and tools or inflammable 
objects such as paper or matches into  the vent, headphone port or AV ports or 
etc.  
!This may cause electric shock or fire. If  an alien substances or water enters the 
product, turn the product off, unplug th e power connector from the wall outlet 
and contact  the Service Center .  
 
 
When viewing a fixed...

 
 
Place the product out of childrens reach, as they could damage by hangi\
ng 
onto it. 
!A falling product may cause injury  to the person or even fatality.  
 
 
When not using the product for an ext ended period of time, keep the product 
unplugged.  
!Otherwise, this may cause heat emis sion from the accumulated dirt or 
degraded insulation,  causing electric shock or fire.  
 
 
Do not place your childrens favorite toys or any other objects of inter\
est on 
the product.  
!Children may try to...

height so that the top of the monitor is slightly below eye level. 
  
!Adjust the monitor angle so that  there is no reflected light on the 
screen.Try to maintain your arms  perpendicular to your armpits. 
 
!Keep your arms level with  the back of your hands. 
 
!Keep the angle of t he elbow perpendicular. 
  
!Keep the angle of the knees at  more than 90 degree. Do not let 
your feet fall up from the floor. Ad just the arm position so that it 
is below the heart.