Samsung Syncmaster 941mp Quick Start Guide

 
 
Sound 
Available Mode 
 : PC : TV : Ext. : AV : S-Video
The default setting may be different depending on the selected Input Mode (input signal source 
selected in External Input List) and the selected resolution.  
OSDDescriptionPlay / Stop
ModeThe Monitor has a built-in high fidelity stereo amplifier.  
1) Standard 
: Choose Standard for the standard factory settings. 
2) Music 
: Choose Music when watching music videos or concerts. 
3) Movie 
: Choose Movie when viewing movies. 
4) Speech 
:...

 
Channel  
Available Mode 
 : PC : TV : Ext. : AV : S-Video
The default setting may be different depending on the selected Input Mode (input signal source 
selected in External Input List) and the selected resolution.  
OSDDescriptionPlay / Stop
CountrySelect the country in which the product is being used before you use the Auto 
Store feature. If you do not see your country in the list, select Others.  
 1) Belgium 
2) France 
3) Germany 
4) Italy 
5) Netherlands 
6) Spain   7) Sweden 
  8) Switzerland...

Manager you want are displayed.
2) Child Lock : Protects children from viewing inappropriate programs by 
blocking certain broadcast or video programs. 
The Child Lock feature can be selected only from the remote.
SortIts used to exchange the numbers of two channels.  
NameIf channel name information is broadcast when you store the channels either 
manually or automatically, the names are assigned to the channels directly. 
You can however change these names or assign new names as required. 
Fine TuneDue...

- The direct button on the remote control is the SLEEP button.
TransparencyChanges the opaqueness of the background of the OSD. 
1) High 
2) Medium 
3) Low 
4) Opaque 
Blue ScreenIf no signal is being received or the signal is very weak, a blue screen 
automatically replaces the noisy picture background. If you wish to continue 
viewing the poor picture, you must set the Blue screen mode to Off. 
 Off  
 On
 
ResetPicture parameters are replaced with the factory default values.  
  
1) Image Reset 
2)...

 
 
 Self-Test Feature Check  
Check the following items yourself before calling for service. 
Contact the service center  for problems that you cannot solve by yourself.  
 
Self-Test Feature Check  | Not Optimum Mode  | Display Adapter Driver  
Maintenance and Cleaning  | Symptoms & Recommended Actions
 
 
1. Self-Test Feature Check
Your monitor provides a self test feature that allows you to check whether your monitor is functioning 
properly. 
1. Turn off both your computer and the monitor.  
2....

  
 
 
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are 
supported by the monitor.
Contact the computer dealer or manufacturer for information on safe mode booting.
 
 
3. Display Adapter Driver 
Display adapter refers to the computer video card driver.  
If the adapter is not properly set, you cannot adjust resolution, frequency or color and you cannot 
install the monitor driver.
1. Checking Adapter Driver 
Click Start   Settings   Control Panel   Display...

4. Check if the scanning ratio of the video screen is set to between 60Hz.  
(The screen refresh rate must be set within in a range of 56~75Hz.)  
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove 
the Display Adapter at the 
Control Panel, 
System, 
Device Administrator and then reboot the 
computer to reinstall the adapter (video) driver.  
 
 
 Check List 
The following table lists possible problems and their solutions. Before calling for...

Picture image is unstable and 
vibrates.zCheck if the resolution and frequency set for the computer 
video card falls in the range supported by the monitor.  
If not, reset them referring to the current Information under 
the monitor menu and  Preset Timing Modes. 
Ghost images are shown in the 
picture.
The image is too light or too darkzAdjust the brightness and contrast.  
(Refer to the Brightness, Contrast ) 
Screen color is inconsistent.zAdjust color using  Colour Control under OSD color 
adjustment...

Note that video card support can vary, depending on the version of the 
driver used. (Refer to the computer or the video card manual for 
details.) 
How can I adjust the resolution?
zWindows XP :  
Set the resolution in the Control Panel
→Appearance and 
Themes→Display→Settings.  
zWindows ME/2000 :  
Set the resolution in the Control Panel→Display→Settings.  
 
* Contact the video card manufacturer for details.  
How can I set the Power Saving 
function?
zWindows XP :  
Set the resolution in the Control...

 
 
 General  
General
Model Name SyncMaster 741MP
LCD Panel
Size 17.0 inch diagonal (43 cm)
Display area 337.92 mm (H) x 270.336 mm (V)
Pixel Pitch 0.264 mm (H) x 0.264 mm (V)
Type a-si TFT active matrix
Synchronization
Horizontal 31 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color
16.2 M
Resolution
Optimum resolution SXGA 1280 x 1024 @ 60 Hz
Maximum resolution SXGA 1280 x 1024 @ 75 Hz
Input Signal, Terminated
RGB Analog, Compliant Digital RGB 
0.7 Vp-p ± 5%,TTL level (V high 
≥ 2.0V, V low 
≤ 0.8V) 
Maximum...