Samsung Syncmaster 941mp Quick Start Guide

							   
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
 SyncMaster 741MP
   
Install Driver Install Pro
gram 
  
  
        
     
     
:Ö
:w
:Ö
:Ö:Ö :Ö:Ö
:Ö:w :Ö:Ö
:Ö:Ö
:Ö:Ö
:Ö:w :Ö:Ö
SyncMaster 741MP
GGGG
GG G
SyncMaster 941MP
 
						

							 
 
  Notational  
    
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
the equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Ground to prevent an electric shock 
 
 
 
 
 
  Power 
  When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to active screen mode.  
 
 
 
 Do not use a damaged or loose plug. 
 
						

							zThis may cause electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug and wire nor place heavy objects upon them, 
which could cause damage.  
zThis may cause electric shock or fire.  
 
 
 
  
  Do not connect too many extension cords or plugs to one outlet.  
zThis may cause fire.  
 
 
 
  
  Do not disconnect the power cord while using the monitor.  
zA surge may be caused by the separation and may damage the monitor.  
 
 
 
  
  Do not use the power cord when the connector or plug is dusty.  
zIf the connector or plug of the power cord is dusty, clean it with a dry cloth.  zUsing the power cord with a dusty plug or connector may cause an electric 
shock or fire.  
 
 
 
 
 
  Installation  
  
Be sure to contact an authorized Service Center, when installing your monitor in a 
 
						

							location with heavy dust, high or low temperatures, high humidity, and exposed to 
chemical substances and where it operates for 24 hours such as at airports, train 
stations etc. 
zFailure to do so may cause serious damage to your monitor.  
 
 
Place your monitor in a location with low humidity and a minimum of dust. 
zFailure to do so may cause electric shock or fire inside the monitor.  
 
 
Do not drop the monitor when moving it. 
zThis may cause damage to the product or the person carrying it.  
 
 
Install the monitor base in a showcase or shelf so that the end of the base does 
not protrude from the showcase or shelf. 
zDropping the product may cause damage to the product or the person carrying 
it.  
 
 
Do not place the product on the floor. 
zTake care, as someone, specifically children may trip over it.  
 
 
Do not place the product on an unstable or small surface area. 
zPlace the product on an even end stable surface ,as the product may fall and 
cause harm to someone walking by, specifically children.  
 
 
Keep any flammable objects such as candles, insecticides or cigarettes away 
from the product. 
zOtherwise, this may cause fire.  
 
 
Keep any heating devices away from the power cable. 
zA melted coating may cause electric shock or fire.  
 
 
Do not install the product in places with poor ventilation, for instance, a 
bookshelf, closet, etc. 
zAny increase in internal temperature may cause fire.  
 
 
Put down the monitor carefully. 
 
						

							zFailing to do so may damage the monitor.  
 
 
Do not place the monitor face down. 
zThis may damage the TFT-LCD surface.  
 
 
The installation of the bracket must be done by a qualified professional. 
zInstalling the bracket by unqualified personnel may result in injury.  zAlways use the mounting device specified in the owners manual.  
 
 
When installing the product, make sure to keep it away from the wall (more 
than 10cm/4 inches) for ventilation purposes. 
zPoor ventilation may cause an increase in the internal temperature of the 
product, resulting in a shortened component life and degraded performance.  
 
 
To prevent rainwater from running along the outdoor antenna cable and into 
the house, ensure that the outdoor portion of the cable is hanging below the 
point of entry. 
zIf the product is exposed to rainwater, it may cause electric shock or fire.  
 
 
If you are using an outdoor antenna, be sure to put sufficient distance between 
your antenna and the electrical wires nearby so that they would not come in 
contact with each other in case the antenna is knocked over by strong wind. 
zA knocked-over antenna may cause injury or an electric shock.  
 
 
 
  
  Keep the plastic packaging (bag) out of children’s reach.  
zThe plastic packaging (bag) may cause suffocation if children play with it.  
 
 
 
 
 
  Clean  
  
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a 
slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly onto the monitor. 
 
						

							zThis may cause damage, electric shock or fire.  
 
 
Use the recommended detergent with a smooth cloth.  
 
 
If the connector between the plug and the pin is dusty or dirty, clean it properly 
using a dry cloth. 
zA dirty connector may cause electric shock or fire.  
 
 
Make sure to unplug the power cord before cleaning the product. 
zOtherwise, this may cause electric shock or fire.  
 
 
Unplug the power cord from the power outlet and wipe the product using a 
soft, dry cloth. 
zDo not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, 
air freshener, lubricant or detergent.  
 
 
Contact a Service Center or Customer Center for interior cleaning once a year. 
zKeep the products interior clean. Dust which has accumulated in the interior 
over an extended period of time may cause malfunction or fire.  
 
 
 
 
 
  Others  
  
Do not remove the cover (or back). 
zThis may cause electric shock or fire.  zRefer to a qualified servicing company.  
 
 
If your monitor does not operate normally - in particular, if there are any 
unusual sounds or smells coming from it - unplug it immediately and contact 
an authorized dealer or the Service Center. .  
zThis may cause electric shock or fire.  
 
 
 
						

							Keep the product away from places exposed to oil, smoke or moisture; do not 
install inside a vehicle. 
zThis may cause malfunction, an electric shock or fire.  zIn particular, avoid operating the monitor near water or outdoors where it could 
be exposed to snow or rain.  
 
 
If the monitor is dropped or the casing is damaged, turn the monitor off and 
unplug the power cord. Then contact a Service Center . 
zThe monitor may cause a malfunction, electric shock or fire.  
 
 
Disconnect the plug from the outlet during storms or lightning or if it is not 
used for a long period of time. 
zFailure to do so may cause electric shock or fire.  
 
 
Do not try to move the monitor by pulling only the wire or the signal cable. 
zThis may cause a breakdown, electric shock or fire due to damage to the 
cable.  
 
 
Do not move the monitor right or left by pulling only the wire or the signal 
cable. 
zThis may cause a breakdown, electric shock or fire due to damage to the 
cable.  
 
 
Do not cover the vents on the monitor cabinet. 
zBad ventilation may cause a breakdown or fire.  
 
 
Do not place water containers, chemical products or small metal objects on the 
monitor. 
zThis may cause malfunction, an electric shock or fire.  zIf a foreign substance enters the monitor, unplug the power cord and contact 
the Service Center .  
 
 
Keep the product away from combustible chemical sprays or inflammable 
substances. 
zThis may cause an explosion or fire.  
 
 
Never insert anything metallic into the monitor openings.  
zThis may cause electric shock, fire or injury.  
 
 
 
						

							Do not insert metal objects such as chopsticks, wire and gimlet or inflammable 
objects such as paper and match into the vent, headphone port or AV ports or 
etc. 
zIt may cause a fire or an electric shock. If an alien substances or water flows 
into the product, turn the product off, unplug the power connector from the wall 
outlet and contact the Service Center.  
 
 
If you view a fixed screen for an extended period of time, residual image or 
blurriness may appear. 
zChange the mode to energy saving mode or set a screensaver to a changing 
picture when away from the monitor for an extended period of time.  
 
 
Adjust the resolution and frequency to the level appropriate for the model. 
zAn inappropriate resolution may cause undesirable picture quality.  
 
17 inch - (43 cm) 1280 X 1024
 
 
Keep the volume at a comfortable level when using the headphones. 
zExcessively loud volume level may damage hearing.  
 
 
Viewing the monitor continuously at a too close angle may result in damage to 
your eyesight. 
 
 
To ease eye strain, take at least a five-minute break after every hour of using 
the monitor. 
 
 
Do not install the product on an unstable, uneven surface or a location prone to
vibrations. 
zDropping the product may cause damage to the product or the person carrying 
it. Using the product in a location prone to vibrations may shorten the lifetime of 
the product or may catch fire.  
 
 
When moving the monitor, turn off and unplug the power cord.  
Make sure that all cables, including the antenna cable and cables connected to 
other devices, are disconnected before moving the monitor. 
zFailure to disconnect cables may damage it and lead to fire or an electric 
shock.  
 
 
Place the product out of children’s reach, as they could damage by hanging 
onto it. 
zA falling product may cause injury to the person or even fatality.  
 
						

							 
 
When not using the product for an extended period of time, keep the product 
unplugged. 
zOtherwise, this may cause heat emission from the accumulated dirt or 
degraded insulation, causing electric shock or fire.  
 
 
Do not place your childrens favorite toys or any other objects of interest on 
the product. 
zChildren may try to climb on the product to retrieve an object. The product 
could fall, causing causing injury or even fatality.  
 
 
When you remove batteries from the remote, be careful that they are not 
swallowed by children. Keep batteries out of the reach of children. 
zIf swallowed, see a doctor immediately. 
 
 
When replacing batteries, place the batteries in the correct +/- polarity position 
as indicated on battery holder. 
zIncorrect polarity may cause a battery to break or leak and could lead to fire, 
injury, or contamination (damage).  
 
 
Use only specified standard batteries. Do not use new and used batteries 
together. 
zThis may cause a battery to break or leak and could lead to fire, injury, or 
contamination (damage). 
 
 
The battery (and rechargeable battery) is not ordinary refuse and must be 
returned for recycling purposes. The customer is responsible for returning the 
used or rechargeable battery for recycling purposes as the consumer of the 
battery. 
zThe customer can return the used or rechargeable battery to a nearby public 
recycling center or to a store selling the same type of the battery or 
rechargeable battery.  
 
 
 
 Proper Seating Posture During Monitor Use
 zPeriodically take a 10 minute break every hour or so to relieve eye 
strain. 
zPosition the monitor so that your eyes are slightly higher than the 
display panel. 
zAdjust the LCD screen panel angle so that the panel faces 
downwards. 
zAdjust the LCD screen panel so that the reflection of the illumination 
is minimized for your comfort. 
zKeep your arms parallel to the floor and lightly place your hands on 
the keyboard. 
zPosition the monitor or chair so that your eyes are slightly higher than 
the display panel.  
 
 
 
						

							 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer.  
Contact a local deale
rto buy optional items.  
 
 
 
 
 Unpacking 
  
Monitor Type A Monitor Type B
 
 
    Manual  
 
 
Quick Setup Guide Warranty Card (Not available in all locations)Users Guide, Monitor Driver, 
Natural Color pro software
 
 
     Cable