Samsung Syncmaster 940nw Quick Start Guide

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings...

 
 
   Microsoft® Windows® NT Operating System 
 
1. Click 
Start, 
Settings, 
Control Panel, and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click 
All Display 
Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) 
and then click 
OK.  
4. Click 
Apply button if you see the screen working normally after clicking 
Test. If the screen is 
not normal, change to a different mode (lower mode of...

monitor the same as the printed or scanned images.  
For more information, refer to Help (F1) in the software program.  
How to install the Natural Color software 
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial 
screen of the program Natural Color will be executed. Click Natural Color on the initial screen 
to install the Natural Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the...

 
 
 Connecting the Monitor 
1. Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2. Use a connection appropriate for your computer.
  2-1.Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. 
 
[ RGB IN ]  
2-2. Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-sub connection cable.
Turn on your...

Monitor and Bottom  
 
   HAS Stand
A. Stand Stopper
 
   Attaching a Base 
    This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
 

 
Simple stand HAS Stand
A. Monitor  
 
B. Mounting interface pad (Sold separately) 
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove screws and then remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it 
with four screws that came with the arm-type base, wall mount hanger or other base....

Then click 
OK button. (Microsoft® Windows® XP/2000 Operating System) 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation 
doesntdamage your system.The certified driver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/. 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows XP| Windows 2000|Windows Me|Windows NT | Linux  
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM...

     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
 

     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be posted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the 
Close button then click 
OK button continually. 
 
 
 
     
 
10. Monitor driver installation is completed. 
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see...

1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings tab and then click 
Advanced...  
4. Choose 
Monitor.  
5. Click 
Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose 
Display a list of the known drivers for this device so that I can choose a 
specific driver then click 
Next and then click 
Have disk.  
7. Click the 
Browse button then choose A:(D:\Driver).  
8. Click the 
Open button, then click 
OK button.  
9....