Samsung Syncmaster 940mw Quick Start Guide

 
 
 
Is weak signal causing poor reception?  
     Purchase and install a signal amplifier for better reception. 
In areas where Antenna cable is not supported,  first, attach Connecter to TV antenna .  
 
3. Connecting DVD/DTV Set Top Box 
Connect to the DVD/DTVSet Top Box input if the device has a DVD/DTV connector.  
You can watch Component simply by hooking up the Component with the monitor as long as the 
power is on. 
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the 
R-AUDIO-L...

 
 1. Connect your headphones to the Headphone connection terminal.  
 
 Using the Stand 
This monitor supports various types of VESA-standard bases.  
You need to either fold or remove the base in use in order to install a VESA base.  
 
 
 
 
1. Folding the base 
The monitor may be reclined from -1 to 23 degrees.  
 
 
2. Attaching a base 
This monitor accepts a 100 mm X 100 mm VESA-compliant mounting interface pad. 
A.  Monitor  
 
B.  Mounting interface pad (Sold separately)  
 
1. Turn off your...

To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to 
mount the monitor at least 10cm away from the wall surface.  
Contact the nearest Samsung Service Center for more information. 
Samsung Electronics will not be responsible for damages caused by using a base other than 
those specified. 
Please use Wall Mount according to the International standards. 
 
 
 
 Installing the monitor driver (Automatic) 
When prompted by the operating system for the monitor driver,...

 
 Installing the monitor driver (Manual) 
Windows XP  | Windows 2000  |Windows Me  |Windows NT  | Linux   
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is slightly different from one operating system to 
another. Follow the directions appropr iate for the operating system you have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown here. 
 
zInternet web site :...

      
 
6. Select  Dont search ,I will..  then click 
Next and then click 
Have disk.  
 
     
 
7. Click the  Browse button then choose A:(D:\Driver) and choose your monitor model in the model list 
and click the  Next button.  
 
     
 
8. If you can see following message window, then click the  Continue Anyway button. Then click 
OK 
button. 
 
  
 
This monitor driver is under certified MS logo,and  this installation doesnt damage your system.The 
certified driver will be posted on Samsung Monitor...

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not  Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button.  
How to install
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click the  Display Icon.  
3. Choose the...

 
 
    Microsoft® Windows® NT Operating System
 
 
1. Click  Start, 
Settings , 
Control Panel , and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then 
click  OK.  
4. Click  Apply button if you see the screen working normally after clicking 
Test. If the screen is not 
normal, change to a different mode (lower mode...

Enter D:\color\NCProSetup.exe and then press the  key.  
(If the drive where the CD is inserted is not D:\, enter the applicable drive.) 
Uninstalling the Natural Color Software Program 
Select [Settings]/[Control Panel] from the [Start] menu and then double-click [Add/Delete a program]. 
Select Natural Color from the list and then click the [Add/Delete] button. 
 

    
Input
Available Source 
List : PC / 
DVI : 
TV : 
Ext. : 
AV : S-
Video : 
Component
OSDDescriptionPlay/Stop
Source ListUse to select PC or other external input sources connected to the Monitor.
Use to select the screen of your choice.
- The direct button on the remote control is SOURCE button.
 PC
 DVI : HDCP supported
 TV
 Ext.
It is connected to the EXT(RGB) jack of the monitor and the TV or Vide\
o 
signal is input/output through this jack. 
 AV
 S-Video 
 Component 
PIPWhen external A/V devices...

- Available in PC, DVI modes.  PIP : Turn the PIP Screen on or off. 
 ON/ Off
- The direct button on the remote control is  PIP button.
 Source : Select the input source for the PIP.
 Main Source: PC / DVI
 PIP Source (Sub): TV / Ext. / AV / S-Video
- The direct button on the remote control is  SOURCE button.
 Size : Changing the Size of the PIP window. 
  /  /   
If you select   in Size, Position will not be activated.
- The direct button on the remote control is  SIZE button. 
 Position : Changing the...