Samsung Syncmaster 940bf Quick Start Guide

Stand does not support Pivot function. 
   
 Type 2 
 
  Monitor & Pivot stand
   
 Type 3 
 
  Monitor & Sliding Stand
 
  
 Manual  
 
 
Quick Setup Guide Warranty Card
 
(Not available in all 
locations) Users Guide, 
Monitor Driver, 
Natural Color software, 
MagicTune™ software  
Ma
gicRotation software
 
 
    
 Cable
   
D-sub Cable  Power Cord  DVI Cable (option)
 
 
 
 Front  
 

 
 
MENU button [ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return to 
the previous menu.  
MagicBright™  
[] 
 
 
 
 MagicBright™ is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
watching. Currently six different modes are available: Custom, 
Text, Internet, Game, Sport and Movie. Each mode has its own 
pre-configured brightness value. You can easily select one of six 
settings by simply pressing MagicBright control button. 
1) Custom...

 
 
  
AUTO buttonUse this button for auto adjustment.
Power button [ ]/  
Power indicator Use this button for turn the monitor on and off. / 
This light glows blue during normal operation, and blinks blue 
once as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving 
functions. For energy conservation, turn your monitor OFF when it is not needed, or when 
leaving it unattended for long periods.
 
 
 
 
  
  
  
    
 
Rear 
Simple...

 
 
 Connecting the Monitor 
1. Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. 
 
[ RGB IN ]  
2-2. Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
[ DVI IN ]  
2-3. Connected to a Macintosh....

 
 Using the Stand 
 
   Monitor Assembly 
Monitor and Bottom   
   Pivot Stand / Sliding Stand
A.Stand Stopper
 
    Attaching a Base 
    This monitor accepts a 75 mm x 75 mm  VESA-compliant mounting interface pad.
 

 
Simple standPivot stand 
Sliding Stand
A.  Monitor  
 
B.  Mounting interface pad  
 
   1. Turn off your monitor and unplug its power cord.   2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes  in the rear cover mounting Pad and secure it 
with four screws that came with the arm-type base, wall mount hanger or other base....

 
 
4. Click the 
Install button in the 
Warning window. 
 
 
 
5. Monitor driver installation is completed.  
 
 
 
  Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click 
Windows XP/2000 Driver  
3. Choose your monitor model in the model list, then click the 
OK button. 
 
 
 
4. If you can see following message window, then click the 
Continue Anyway button. 
Then click 
OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS...

 
 
 Installing the Monito r Driver (Manual) 
Windows XP  | Windows 2000  |Windows Me  |Windows NT  | Linux   
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :...

 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this...

 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings...