Samsung Syncmaster 933nw User Manual

							1. Insert CD into the CD-ROM drive.
2.
Click Start → Control Panel then click the Appearance and Themes icon. 3. Click Display icon and choose the Settings tab then click Advanced.\
...
4. Click the Properties button on the Monitor tab and select Driver t\
ab.
5. Click Update Driver... and select Install from a list or... then cli\
ck Next button.
6. Select Dont search, I will... then click Next and then click Have \
disk. Using the Software
20 
						

							7.
Click the Browse button then choose A:(D:\Driver) and choose your m\
onitor model in the model
list and click the Next button. 8.
If you can see following message window, then click the Continue Anyway\
 button. Then click
OK button.  
 Note
This monitor driver is under certifying MS logo, and this installation d\
oesnt damage your system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9.
Click the Close button then click OK button continually. Using the Software
21
 
						

							 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see Digital Signature Not Found on your monitor, follow t\
hese steps.
1.
Choose OK button on the Insert disk window.
2. Click the Browse button on the File Needed window.
3. Choose A:(D:\Driver) then click the Open button and then click OK\
 button.
How to install
1. Click Start, Setting, Control Panel.
2. Double click the Display icon.
3. Select the Settings tab and click Advanced Properties button.
4. Choose Monitor. Case1 : If the Properties button is inactive, it means your monitor is\
 properly configured. Please
stop installation
Case2 : If the Properties button is active, click the Properties but\
ton then follow next steps
continually.
5. Click Driver and then click on Update Driver... then click on the N\
ext button.
6. Choose Display a list of the known drivers for this device so that I ca\
n choose a specific driver
then click Next and then click Have disk.
7. Click the Browse button then choose A:(D:\Driver).
8. Click the Open button, then click OK button.
9. Choose your monitor model and click the Next button then click Next \
button.
10. Click the Finish button then the Close button. If you can see the Digital Signature Not Found window then click the \
Yes button. And click
the Finish button then the Close button.
Microsoft ®
 Windows ®
 Millennium Operating System
1. Click Start, Setting, Control Panel.
2. Double click the Display icon.
3. Select the Settings tab and click Advanced Properties button. Using the Software
22
 
						

							4. Select the Monitor tab.
5.
Click the Change button in the Monitor Type area.
6. Choose Specify the location of the driver.
7. Choose Display a list of all the driver in a specific location... then\
 click Next button.
8. Click the Have Disk button.
9. Specify A:\(D:\driver) then click OK button.
10. Select Show all devices and choose the monitor that corresponds to the\
 one you connected to
your computer and click OK.
11. Continue choosing Close button and OK button until you close the Dis\
play Properties dia-
logue box.
Microsoft ®
 Windows ®
 NT Operating System
1. Click Start, Settings, Control Panel, and then double-click Displ\
ay icon.
2. In Display Registration Information window, click Settings Tab and then \
click All Display
Modes.
3. Select a mode that you wish to use (Resolution, Number of colors and Ve\
rtical frequency) and
then click OK.
4. Click Apply button if you see the screen working normally after clicki\
ng Test. If the screen
is not normal, change to a different mode (lower mode of resolution, co\
lors or frequency).  Note
If there is no Mode at All Display Modes, select the level of resolution\
 and vertical frequency by
referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a typ\
e of system setting file.
1.

Press Enter at the first and the second screen after executing the X86\
Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard.
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7. First of all, set a horizontal frequency for your monitor. (You can ent\
er the frequency directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency\
 directly.)
9. Enter the model name of your monitor. This information will not affect t\
he actual execution of
X-Window.
10. You have finished setting up your monitor. Execute X-Window after settin\
g other requested
hardware. Using the Software
23
 
						

							Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the \
images printed out by a printer
or other images scanned by a scanner or a digital camera are not the sam\
e as those shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a col\
or administration system de-
veloped by Samsung Electronics in association with Korea Electronics & T\
elecommunications
Research Institute (ETRI). This system is available only for Samsung m\
onitors and makes the color
of the images on the monitor the same as the printed or scanned images. \
For more information, refer
to Help (F1) in the software program.
How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. T\
hen, the initial screen of
the program Natural Color will be executed. Click Natural Color on the i\
nitial screen to install the
Natural Color software.
To install the program manually, insert the CD included with the Samsung\
 monitor into the CD-ROM
Drive, click the [Start] button of Windows and then select [Run...]. Ent\
er D:\color\NCProSetup.exe
and then press the [Enter] key. (If the drive where the CD is inserted \
is not D:\, enter the applicable
drive.)
How to delete the Natural Color software program Select Setting/Control Panel on the Start menu and then double-click\
 Add/Delete a program.
Select Natural Color from the list and then click the Add/Delete butto\
n. Using the Software
24 
						

							MagicTune™
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicTune™ installation file.  Note
If the popup window to install the software for the main screen is not d\
isplayed, proceed with the
installation using the MagicTune executable file on the CD.
3.

Select installation Language, Click Next.
4. When the Installation Shield Wizard window appears, click Next.
5. Select I agree to the terms of the license agreement to accept the ter\
ms of use.
6. Choose a folder to install the MagicTune™ program.
7. Click Install.
8. The Installation Status window appears.
9. Click Finish.
10. When the installation is complete, the MagicTune™ executable icon app\
ears on your desktop.
Double-click the icon to start the program.
MagicTune™ execution icon may not appear depending on specification o\
f computer sys-
tem or monitor. If that happens, press F5 Key. Installation Problems
The installation of MagicTune™ can be affected by such factors as the\
 video card, motherboard and
the network environment.
System Requirements
OS
•

Windows 2000 Using the Software
25
 
						

							• Windows XP Home Edition
•
Windows XP Professional
• Windows Vista™
It is recommended using MagicTune™ in Windows ®
 2000 or later. Hardware
•

32 MB Memory above
• 60 MB Hard disk space above
For more information, visit the MagicTune™ website. Uninstall
The MagicTune™ program can be removed only by using the Add or Remov\
e Programs option of
the Windows ®
 Control Panel.
Perform the following steps remove MagicTune™.
1. Go to [Task Tray] → [ Start] → [Settings] and select [Control Panel] in the menu. If the program
runs on Windows ®
 XP, go to [Control Panel] in the [Start] menu.
2.

Click the Add or Remove Programs icon in Control Panel.
3. In the Add or Remove Programs screen, scroll down to find MagicTune™\
. Click on it to
highlight it.
4. Click the Change/Remove button to remove the program.
5. Click Yes to begin the uninstall process.
6. Wait until the Uninstall Complete dialog box appears.  Note
Visit the MagicTune™  website for technical support for MagicTune™, FAQs (questions and answers)\
and software upgrades. Using the Software
26
 
						

							Adjusting the Monitor
Direct Functions
AUTO
When the AUTO button is pressed, the auto adjustment screen appears as\
 shown in the animated
screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog\
 signal. The values of 
Fine,
Coarse and Position are adjusted automatically. If auto adjustment does not work properly, press AUTO button again to \
adjust picture with more
accuracy. If you change resolution in the control panel, auto function will be exe\
cuted automatically.
OSD Lock & Unlock When pressing the AUTO button after locking the OSD When pressing the MENU button after locking the OSD
27 
						

							This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent others
from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to act\
ivate the OSD adjustment
lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to d\
eactivate the OSD adjustment
lock function.
 Note
Though the OSD adjustment lock function is activated, you can still adju\
st the brightness and contrast,
and adjust Customized Key ( ) using the Direct button.
Customized key You can customize key assignment for the Custom button according to your\
 preferences.
To view the operating screen displayed when pressing the [ 
 ] button after configuring the cus-
tomized key for a function, click the name of each function.
( MagicBright - MagicColor - Color Effect - Image Size)  Note
You can configure the customized key for a required function via  Setup > Customized Key.
Adjusting the Monitor
28 
						

							Brightness
When OSD is not on the screen, push the 
Brightness ( ) button to adjust brightness.
OSD Function Picture
BrightnessContrastMagicBright Color
MagicColorColor ToneColor Con-
trolColor Effect
Gamma Image Coarse
FineSharpnessH-PositionV-Position OSD
LanguageTransparen-
cyDisplay Time Setup
ResetCustomized
KeyOff Timer
Image Size  Information
 Picture
Brightness (Not available in  MagicBright  mode of Dynamic Contrast.) You can use the on-screen menus to change the brightness according to pe\
rsonal preference.
MENU → 
 →   →   ,   → MENUAdjusting the Monitor
29