Samsung Syncmaster 933nw User Manual

1. Insert CD into the CD-ROM drive.
2.
Click Start → Control Panel then click the Appearance and Themes icon. 3. Click Display icon and choose the Settings tab then click Advanced.\
...
4. Click the Properties button on the Monitor tab and select Driver t\
ab.
5. Click Update Driver... and select Install from a list or... then cli\
ck Next button.
6. Select Dont search, I will... then click Next and then click Have \
disk. Using the Software
20 

7.
Click the Browse button then choose A:(D:\Driver) and choose your m\
onitor model in the model
list and click the Next button. 8.
If you can see following message window, then click the Continue Anyway\
 button. Then click
OK button.  
 Note
This monitor driver is under certifying MS logo, and this installation d\
oesnt damage your system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9.
Click the Close button then click OK button continually. Using the...

 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see Digital Signature Not Found on your monitor, follow t\
hese steps.
1.
Choose OK button on the Insert disk window.
2. Click the Browse button on the File Needed window.
3. Choose A:(D:\Driver) then click the Open button and then click OK\
 button.
How to install
1. Click Start, Setting, Control Panel.
2. Double click the Display icon.
3. Select the Settings tab and click Advanced Properties...

4. Select the Monitor tab.
5.
Click the Change button in the Monitor Type area.
6. Choose Specify the location of the driver.
7. Choose Display a list of all the driver in a specific location... then\
 click Next button.
8. Click the Have Disk button.
9. Specify A:\(D:\driver) then click OK button.
10. Select Show all devices and choose the monitor that corresponds to the\
 one you connected to
your computer and click OK.
11. Continue choosing Close button and OK button until you close the Dis\
play...

Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the \
images printed out by a printer
or other images scanned by a scanner or a digital camera are not the sam\
e as those shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a col\
or administration system de-
veloped by Samsung Electronics in association with Korea Electronics & T\
elecommunications
Research Institute (ETRI). This system is available only...

MagicTune™
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicTune™ installation file.  Note
If the popup window to install the software for the main screen is not d\
isplayed, proceed with the
installation using the MagicTune executable file on the CD.
3.

Select installation Language, Click Next.
4. When the Installation Shield Wizard window appears, click Next.
5. Select I agree to the terms of the license agreement to accept the ter\
ms of use.
6. Choose a folder to...

• Windows XP Home Edition
•
Windows XP Professional
• Windows Vista™
It is recommended using MagicTune™ in Windows ®
 2000 or later. Hardware
•

32 MB Memory above
• 60 MB Hard disk space above
For more information, visit the MagicTune™ website. Uninstall
The MagicTune™ program can be removed only by using the Add or Remov\
e Programs option of
the Windows ®
 Control Panel.
Perform the following steps remove MagicTune™.
1. Go to [Task Tray] → [ Start] → [Settings] and select [Control Panel] in the menu....

Adjusting the Monitor
Direct Functions
AUTO
When the AUTO button is pressed, the auto adjustment screen appears as\
 shown in the animated
screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog\
 signal. The values of 
Fine,
Coarse and Position are adjusted automatically. If auto adjustment does not work properly, press AUTO button again to \
adjust picture with more
accuracy. If you change resolution in the control panel, auto function will be exe\
cuted...

This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent others
from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to act\
ivate the OSD adjustment
lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to d\
eactivate the OSD adjustment
lock function.
 Note
Though the OSD adjustment lock function is activated, you can still adju\
st the brightness and contrast,
and adjust Customized...

Brightness
When OSD is not on the screen, push the 
Brightness ( ) button to adjust brightness.
OSD Function Picture
BrightnessContrastMagicBright Color
MagicColorColor ToneColor Con-
trolColor Effect
Gamma Image Coarse
FineSharpnessH-PositionV-Position OSD
LanguageTransparen-
cyDisplay Time Setup
ResetCustomized
KeyOff Timer
Image Size  Information
 Picture
Brightness (Not available in  MagicBright  mode of Dynamic Contrast.) You can use the on-screen menus to change the brightness according to pe\...