Samsung Syncmaster 931bw Quick Start Guide

 
 
 
 
MenuDescriptionPlay/Stop
Auto SourceSelect Auto Source for the monitor to automatically select the 
signal source.  
 
MENU →  ,  →  →  →  ,  → MENU
Image Reset Image parameters are replaced with the factory default values.  
 MENU →  ,  →  →  ,  →  →  ,  → MENU
Color ResetColor parameters are replaced with the factory default values.  
 MENU →  ,  →  →  ,  →  →  ,  → MENU
RTARTA (Response Time Accelerator)  
A function that accelerates the response speed of the panel so 
as to provide a sharper...

 
 
 
MenuDescription
InformationShows a video source, display mode on the OSD screen.  
 MENU →  ,  
 

 Model 
 
 Check List
Before calling for service, check the information in this section to see if you can remedy any problems 
yourself. If you do need assistance, please call the  phone number on the Information section or contact 
your dealer . 
SymptomCheck ListSolutions
No images on the 
screen.  
I cannot turn on 
the monitor. Is the power cord 
connected 
properly?
Check the power cord connection and supply.
Can you see 
Check Signal 
Cable on the 
screen?  (Connected using the D-sub cable)  
Check...

indicator on the 
monitor blinking at 1 
second intervals?restore the image on the screen.  
 
If there is still no image, press the SOURCE button.  
Then press any key on the keyboard again to activate the 
monitor and restore the image on the screen. 
Connected using 
the DVI cable?You may get a blank screen if you boot the system 
before you connect the DVI cable, or disconnect and then 
reconnect the DVI cable while the system is running as 
certain types of graphic cards do not send out video...

 
 
 
 
  reads 
Unrecognized 
monitor, Plug & 
Play (VESA DDC) 
monitor found. See the video card 
manual to see if the 
Plug & Play (VESA 
DDC) function can 
be supported. Install the monitor driver according to the Driver 
Installation Instructions.
Check when 
MagicTune™ does 
not function 
properly.MagicTune™ 
feature is found only 
on PC (VGA) with 
Window OS that 
supports Plug and 
Play.* To check whether your PC is available for MagicTune™ 
feature, follow the steps below (When Windows is XP);...

Set the resolution at the Control Panel → Display → 
Settings.  
 
Contact the video card manufacturer for details.
How can I set the Power Saving function? Windows XP :  
Set the resolution at the Control Panel → 
Appearance and Themes → Display → Screen 
Saver.  
Set the function at BIOS-SETUP of the computer.  
 
Windows ME/2000 :  
Set the resolution at the Control Panel →
 Display →
 
Screen Saver.  
Set the function at BIOS-SETUP of the computer.  
 
Refer to Windows/Computer Manual
How can I clean...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
  
Environment 
The location and the position of the monitor may influence the quality and other features of the 
monitor.  
 
If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another 
room.  
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet 
(one meter) of the monitor. 
Useful Tips 
A monitor recreates visual signals received from the computer. Therefore, if there is trouble with...

 Model
 Specifications
General
Model NameSyncMaster 931BW
LCD Panel
Size19  Wide Diagonal (48 cm)
Display area 408.24 mm (H) x 255.15 mm (V)
Pixel Pitch
0.2835 mm (H) x 0.2835 mm (V)
Synchronization
Horizontal31 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color
16.7M Colors (8bit)
Resolution
Optimum resolution1440 X 900@60 Hz
Maximum resolution 1440 X 900@75 Hz
Input Signal, Terminated
RGB Analog, DVI Compliant Digital RGB,  
0.7 Vp-p ± 5%, TT L level (V high ≥ 2.0V, V low  ≤ 0.8V) 
Maximum Pixel Clock
137 MHz...

 
 
 
 
15pin to 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable, (Option)
Signal Connectors
15pin 3-row D-Sub connector, 24pin 3-row DVI-D connector
Dimensions (W x D x H) / Weight 
448.0 X 58.5 X 311.0 mm / 17.6 x 2.3 x 12.2 inch (Without Stand)  
448.0 X 202.2 X 363.9 mm / 17.6 x 8.0 x 14.3 inch (With Stand) / 4.2 kg / 9.3 lbs
VESA Mounting Interface
75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
OperatingTemperature : 50 °F ~ 104 °F...

 
 
Power Consumption Less than 42 WLess than 1 W  
(Off-mode)  Less than 1 W
This monitor is EPA ENERGY STAR® compliant and ENERGY2000 
compliant when used with a co mputer equipped with VESA DPMS 
functionality.  
As an ENERGY STAR
® Partner, SAMSUNG has determined that this 
product meets the ENERGY STAR® guidelines for energy efficiency.
 
 
 Preset Timing Modes
If the signal transferred from the computer is the  same as the following Preset Timing Modes, the 
screen will be adjusted automatically ....