Samsung Syncmaster 911lt Quick Start Guide

							 
 
 
 Control Buttons 
  
[ ] Opens the OSD menu. Also use to exit the OSD menu or return to the 
previous menu. 
[ ] These buttons allow you to adjust items in the menu.
[ ] Press this button to Activates a highlighted menu item. 
[AUTO] When the AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.
 
 Direct Functions 
AUTO
 
						

							 
 
 
 
Menu Description
AUTO  When the AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.  
The values of fine, coarse and position are adjusted automatically.  
 
 
 
 
Available in analog Mode Only
If auto adjustment does not work properly, press AUTO button again to adjust 
picture with more accuracy.
If you change resolution in the control panel, auto function will be executed 
automatically. 
OSD Lock & Unlock
 
In case of pushing AUTO button after locking OSD
 
						

							 
 
 
 
   
In case of pushing MENU button after locking OSD
Menu Description
OSD Lock & UnlockThis is the function that locks the OSD in order to keep the current states of 
settings or prevent others from adjusting the current settings.  
 
Lock : Hold down the menu button for more than five (5) seconds to activate the 
OSD adjustment lock function. 
 
Unlock : Hold down the menu button for more than five (5) seconds to 
deactivate the OSD adjustment lock function. 
 
Though the OSD adjustment lock function is activated, you can still adjust 
the brightness and contrast, and adjust MagicBright ( ) using the Direct 
button.
MagicBright™
 
Menu Description
 
						

							 
 
 
 
 
 
 
   
MagicBright™Push the MagicBright™ button to circle through available preconfigured 
modes.  
 
- Six different modes (Custom/Text/Internet/Game/Sport/Movie) 
Volume 
 
Menu Description
 
Volume When OSD is not on the screen, push [
▲/ ] the button to adjust volume. 
SOURCE
Menu Description
SOURCE Selects the Video signal while the OSD is off. (Analog/Client) 
 
						

							 
 
 
 
OSD Function 
Picture Brightness Contrast 
Color MagicColor  Color Tone  Color Control  Gamma 
Image Coarse Fine  Sharpness H-Position V-Position 
OSD Language H-Position V-Position Transparency Display Time 
Setup Image Reset  Color Reset 
Information 
 
 
 
 
 
 
Picture 
Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
MENU →  →  →  ,  → MENU
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference.  
( Not available in MagicColor mode of Full and Intelligent. ) 
 
 
MENU →  →  ,  →  →  ,  → MENU
Color 
 
						

							 
Menu Description Play/Stop
MagicColorMagicColor is a new technology that Samsung has exclusively 
developed to improve digital image and to display natural color 
more clearly without disturbing image quality.  
 
 
Off Returns to the original mode.
Demo The screen before applying MagicColor appears 
on the right and the screen after applying 
MagicColor appears on the left. 
Full Displays not only vivid natural color but also 
more realistic natural skin color with clearness. 
Intelligent Displays vivid natural color with clearness. 
MagicZone The MagicZone ensures the clear and sharp 
display of animated multimedia or photo images 
by enhancing the brightness, sharpness, 
saturation, hue of a certain area on the screen. 
Especially, MagicZone is appropriate to using 
the moving picture.   MagicZone  
 
Hue This function is to adjust the hue of the 
MagicZone. 
Saturation This function is to adjust the saturation of the 
MagicZone. 
Brightness  This function is to adjust the brightness of the 
MagicZone. 
Sharpness  This function is to adjust the sharpness of the 
MagicZone.
H-Position This function is to move the MagicZone 
horizontally.
V-Position  This function is to move the MagicZone vertically.
H-Size  This function is to adjust the horizontal size of the 
MagicZone.
V-Size This function is to adjust the vertical size of the 
MagicZone.
Hue  
 
Saturation  
 
Brightness  
 
Sharpness  
 
H-Position  
 
V-Position  
 
H-Size  
 
V-Size  
 
The tone of the color can be changed and one of four modes 
can be selected -Cool, Normal, Warm and Custom.  
 
						

							 
 
 
  Color Tone( Not available in MagicColor mode of Full and Intelligent. )  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Color ControlAdjusts individual Red, Green, Blue color balance. - Red, 
Green, Blue  
( Not available in MagicColor mode of Full and Intelligent. )  
 
MENU →  ,  →  →  ,  →  →  ,  →  →  ,  → MENU
GammaGamma correction changes the luminance of the colors with 
intermediate luminance.  
 
- Mode 1  
- Mode 2  
- Mode 3  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Image 
Menu Description Play/Stop
CoarseRemoves noise such as vertical stripes.  
Coarse adjustment may move the screen image area. You 
may relocate it to the center using the horizontal control 
menu.  
 
 
 
MENU →  ,  →  →  →  ,  → MENU
Available in analog Mode Only
FineRemoves noise such as horizontal stripes.  
If the noise persists even after fine tuning, repeat it after 
adjusting the frequency (clock speed).  
 
 
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Available in analog Mode Only
SharpnessChanges the clearance of image.  
( Not available in MagicColor mode of Full and 
Intelligent. ) 
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
 
						

							 
 
 
  H-PositionChanges the horizontal position of the monitors entire 
display.  
 
 
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Available in analog Mode Only
V-PositionChanges the vertical position of the monitors entire 
display.  
 
 
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Available in analog Mode Only
OSD 
Menu Description Play/Stop
LanguageYou can choose one of the nine languages.  
  
 
 
MENU →  ,  →  →  →  ,  → MENU 
The language chosen affects only the language of the OSD. It 
has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
TransparencyChange the transparency of the background of the OSD.  
 MENU →  ,  →  →  ,  →  →  ,  → MENU
The menu will be automatically turned off if no adjustments are 
made for a certain time period.  
You can set the amount of time the menu will wait before it is 
 
						

							 
 
 
 
 
 
  Display Timeturned off.  
- 5 Sec, 10 Sec, 20 Sec, 200 Sec  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Setup 
Menu Description Play/Stop
Image Reset Image parameters are replaced with the factory default 
values.  
 
MENU →  ,  →  →  →  ,  → MENU
Color ResetColor parameters are replaced with the factory default 
values.  
 
MENU →  ,  →  →  ,  →  →  ,  → MENU
Information 
 
						

							 
 
 
Menu Description
InformationShows a video source, display mode on the OSD screen.  
 
MENU →  ,