Samsung Syncmaster 760bf Quick Start Guide

 
MagicColor 
3. Full : Displays not only vivid natural 
color but also more realistic natural 
skin color with  clearness.  
4. Intelligent : Displa ys vivid natural color with clearness.  
5. MagicZone 
{The MagicZone ensures the clear and sharp display of animated 
multimedia or photo images by en hancing the brightness, sharpness, 
saturation, Hue of a certain area on the screen. This offers an easy-
to-use interface that highlights the video-playing portion of your 
multimedia program by...

 
 
 
 
Image Setup 
 
zFine : Removes noise such 
as horizontal stripes.  
If the noise persists even after Fine  tuning, repeat it after adjusting the 
frequency (clock speed).  
zCoarse : Removes noise such  as vertical stripes.  
Coarse adjustment may move the screen image area.  
You may relocate it to the center using the Horizontal Control menu.  
zAuto Setup : Auto adjust ment allows the monitor to self-adjust to the 
incoming video signal. The values of fine, coarse and position are adjusted...

Server IP  
 
Write down the server IP .  
 
Department   
 
Write down the department. 
 
   Location   
 
Write down the location.  
 
Version 
 
Displays the version of MagicTune™. 
 
 
 
Overview  |OSD Mode|
Color Calibration| Troubleshooting
 
 
 
Color Calibration 
 
 
   
 
  Color Calibration 
 
Color Calibration guides you to get optimal color condition for your monitor. 
 
Proceed following 5steps for getting optimal monitor color condition . 
1. Control Brightness control bar for matching the...

 
 
Press Preview button on the Color Calibration.  
The above picture will be shown. 1. Press View Calibrated button to see the  calibration effect which you adjusted.  
2. Press View Uncalibrated button to see the original image.  
 
 
Overview | OSD Mode | Color Calibration | Troubleshooting 
 
 
 
Troubleshooting 
 
 
The current computing system is not compatible with MagicTune™. 
Please press OK and click on the Shortcu t to the MagicTune™ site to view our 
home page for further reference.  
 
An...

 Please visit our homepage to see the Troubleshooting section.  
 
An error occurs when re placing the monitor with  a new one when the system 
power is off but the system  has not been restarted. 
 
Please restart the system each time th e monitor is replaced before using 
MagicTune™.   
 
An error occurs when the video card driver is not installed properly.  
This happens when the current video card list is not displayed normally. You can 
check this via Start  → Setup 
→ System 
→ Hardware 
→ Device...

 
not function properly.  (VGA) with Window OS that supports Plug 
and Play.  steps below (When Windows™ is XP);  
 
Control Panel 
→ Performance and 
Maintenance  → System 
→ Hardware 
→ 
Device Manager  → Monitors 
→ After deleting 
Plug and Play monitor, find Plug and Play 
monitor by searching new Hardware. 
MagicTune™ is an additional software for the 
monitor. Some graphic cards may not support 
your monitor. When you have a problem with 
the graphic card, visit ou r website to check the...

   
Traditionally, computer displays allowed the user to view only in landscape mode. 
In todays information age, more users need to view documents, web pages, emails, etc. in there 
day to day life. These types of applications can be better viewed in portrait mode where the entire 
contents are available on the screen. This greatly improves the users productivity allowing him 
the flexibility to switch between landscape and portrait modes. 
 
The MagicRotation Software from Samsung Electronics, Inc....

 
 
  Rotate  :  Display will get rotated by the unit of 90 degree 
 
 
 
 
 Rotate to 0  : Display will get rotated to 0 degr
ee from the current angle of rotation. 
 
 
 
 
 Rotate to 90  : Display will get rotate
d to 90 degree from the current angle of rotation. 
 
 

  
 
 
 Rotate to 180  : Display will get rotated to 180 degree from the current angle of rotation. 
 
 
 
 
 Rotate to 270  : Display will get rotated to 270 degree from the current angle of rotation. 
 
 

 
 
 
 Hot key  : Hot Keys are available by default and can be changed by user.  
      It can be assigned by user directly with keyboard after changing the existing HotKey.  
      User can create the hot key with the combination of Shift, Ctrl, Alt and general keys. 
      In case only general key is pressed, it will be assigned in the form of Alt+general key. 
 
   Help  : It shows the HELP of MagicRotation program. 
 
   About  : It shows the version and copyright of MagicRotation program. 
 
   Exit...