Samsung Syncmaster 760bf Quick Start Guide

  
  
  
  
  
  
  
  
  
  
  
  
  
   
     
  
  
  
     
     
           
  
  
 
     
SyncMaster 760BF / 960BF
  
  
  
  
  
  
  
  
  
  
  
  
  
  
 
     
 

 
 
  Notational 
  
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Grounding to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for extended period of  time, set your computer to DPMS.  
If using a screen saver, set it to the active screen mode.  
 

 
 
 Do not use a damaged or loose plug. 
zThis may cause an electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause an electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug and wire nor place...

 
  Installation  
  
  Be sure to contact an authorized  Service Center when installing your set in a 
location with heavy dust, high or low temperatures, high humidity, and 
chemical substances, or where it will be operated for 24 hours continuously 
such as an airport, train station or etc.  
 
Failure to do so may cause se rious damage to your set.
 
 
Put your monitor in a location with low humidity and a minimum of dust. 
zFailure to do so may cause an electric shock or fire inside the monitor....

 
 
Set down the monitor carefully. 
zThe monitor could be damaged or broken.  
 
 
Do not place the monitor face down. 
zThe TFT-LCD surface may be damaged.  
 
 
Installing a wall bracket must be done by a qualified professional. 
zInstallation by unqualified personnel may result in injury.  
zAlways use the mounting device specified in the owners manual.  
 
 
When installing the product, make sure to keep it away from the wall  
(more than 10 cm/4 inch ) for ventilation purposes.  
zPoor ventilation...

 
Use the recommended detergent with a smooth cloth.  
 
 
If the connector between the plug and the pin is dusty or dirty, clean it 
properly with a dry cloth. 
zA dirty connector may cause an  electric shock or fire.  
 
 
Make sure to unplug the power cord before cleaning the product. 
zOtherwise, this may cause electric shock or fire.  
 
 
Unplug the power cord from the power  outlet and wipe the product using 
a soft, dry cloth. 
zDo not use any chemicals such as wax, benzene, alcohol, thinners,...

 
 
If the monitor is dropped or the casing is damaged, turn the monitor off 
and unplug the power cord. Then contact the Service Center. 
zThe monitor may malfunction, causing an electric shock or fire.  
 
 
Disconnect the plug from the outlet during storms or lightening or if it is 
not used for a long period of time. 
zFailure to do so may cause an electric shock or fire.  
 
 
Do not try to move the monitor by pu lling only the wire or the signal 
cable. 
zThis may cause a breakdown, electric shock...

 
Do not insert metal objects such as chopsticks, wire and gimlet or 
inflammable objects such as paper and match into the vent, headphone 
port or AV ports. 
zIt may cause a fire or an electric sh
ock. If an alien substances or water 
flows into the product, turn the product off, unplug the power connector 
from the wall outlet and contact  Service Center.  
 
 
If you view a fixed screen for an extended period of time, residual image 
or blurriness may appear. 
zChange the mode to energy save or set a...

eyesight damage. 
 
To ease eye strain, take at least a five-minute break after every hour of 
using the monitor . 
 
 
Do not install the product on an unstable, uneven surface or a location 
prone to vibrations.  
zDropping the product may cause damage to the product or personal 
injury. Using the product in a location prone to vibrations may shorten 
the lifetime of the product or may catch fire.  
 
When moving the monitor, turn off and unplug the power cord.  
Make sure that all cables, including...

  
 
List of Features  
  RTA Monitor  
 
RTA(Response Time Accelerator)  
A function that accelerates the response speed of the panel so as to provide a sharper and 
more natural video display.
z  Implements deeper colors in contrast rates  of 700:1 for Magic Contrast 760BF and 700:1 
for 960BF.
z  Provides a sharp image without causing an afterimage at a fast Magic speed of 4ms.
z  Allows you to adjust the height up to 31 mm for the Magic Stand 760BF and 36 mm for  the 960BF.
z  When changing the...