Samsung Syncmaster 740t Quick Start Guide

							1.[ ]Use this button to open the  on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]This button allows you to adjust items in the menu.
3.[ ]Press this button to activate 
a highlighted menu item.
4.[
AUTO ]Press to self-adjust to the incomin
g PC signal. The values of fine,coarse and position are 
adjusted automatically.
 AUTO 
SyncMaster 940Fn
 
						

							Menu Description
AUTOWhen the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
- If auto adjustment does not work properly, press AUTO button again to 
adjust picture with more accuracy. 
- If you change resolution in the control panel, auto function will be 
executed automatically. 
 Locked 
 
						

							Menu Description
LockedAfter pushing the MENU button more than 5 seconds, OSD function is 
locked (unlocked). 
You can also adjust the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 MagicBright™ 
Menu Description
MagicBright™Push the MagicBright button to circle through available preconfigured 
modes. 
- Six different modes (Custom/Text/Internet/Game/Sport/Movie) 
 Brightness 
 
						

							Menu Description
BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 SOURCE 
Menu Description
SOURCESelects the video signal while the OSD is off. 
  Picture Brightness Contrast
 
						

							  Color MagicColor Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset Priority
  Information
 Picture   
Menu Description Play/Stop
Brightness You can use the on-screen menus to change the 
brightness according to personal preference.  
Direct Access Feature 
: When OSD is not on the screen, 
push the button to adjust brightness. 
Contrast You can use the on-screen menus to change the contrast 
according to personal preference. 
(
Not available in MagicColor mode of Full and Intelligent. )
 Color   
 
						

							Menu Description Play/Stop
MagicColorMagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly without disturbing image 
quality. 
1) Off - Returns to the original mode.
2) Demo - The screen before applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full - Displays not only vivid natural color but also 
more realistic natural skin color with clearness.
4) Intelligent - Displays vivid natural color with clearness.
5) MagicZone - The MagicZone ensures the clear and 
sharp display of animated multimedia or photo images by 
enhancing the brightness, sharpness, saturation, hue of a 
certain area on the screen. 
Especially, MagicZone is appropriate to using the moving 
picture. 
MagicZone
 Hue  
: This function is to adjust the hue of the MagicZone.
 Saturation  
: This function is to adjust the saturation of the 
MagicZone.
 Brightness  
: This function is to adjust the brightness of the 
MagicZone.
 Sharpness  
: This function is to adjust the sharpness of the 
MagicZone.
 H-Position  
: This function is to move the MagicZone horizontally.
 V-Position  
: This function is to move the MagicZone vertically.
 H-Size  
: This function is to adjust the horizontal size of the 
MagicZone.
 V-Size  
Hue
Saturation
Brightness
Sharpness
H-Position
V-Position
H-Size
V-Size
 
						

							 : This function is to adjust
 the vertical size of the 
MagicZone.  
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom. 
(
Not available in MagicColor mode of Full and Intelligent. )
Color ControlAdjusts individual R,
G,B color balance. 
( Not available in MagicColor mode of Full and Intelligent. )
GammaGamma correction changes the luminance of the colors 
with intermediate luminance. zMode 1  
zMode 2  
zMode 3  
 
 
 
 
 Image   
Menu Description Play/Stop
Coarse Removes noise such as ve
rtical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only)
Fine   Removes noise such as horizo
ntal stripes. If the noise 
persists even after fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only)
Sharpness Changes the clearance of image. 
(
Not available in MagicColor mode of Full and Intelligent. )
H-PositionChanges the horizontal position of the monitors entire 
display. 
(Available in analog mode only)
Changes the vertical position of the monitors entire 
 
						

							V-Positiondisplay.
(Available in analog mode only)
 OSD   
Menu Description Play/Stop
Language You can choose one of eight languages. 
Note
:The language chosen affects only the language of 
the OSD. It has no effect on  any software running on the 
computer.
H-Position You can change the horizontal position where the OSD 
menu appears on your monitor.
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor.
Transparency
Change the transparency of the background of the OSD.
Display TimeThe menu will be automatically turned off if no adjustments 
are made for a certain time period.  
You can set the amount 
of time the menu will wait before it 
is turned off.
 Setup   
 
						

							Menu Description Play/Stop
Auto SourceSelect
Auto Source for the monitor to automatically select 
the signal source.
Image ResetImage parameters are replaced with the factory default 
values.
Color ResetColor parameters are replaced with the factory default 
values.
PriorityThis is a source-switch function according to the priority 
that the user has set for the source.
 Information   
 
						

							Menu Description
Information Shows a video source, displa
y mode on the OSD screen.